Chair of Processing of Composites and Design for Recycling (270)

Organisational unit: Chair

51 - 100 out of 372Page size: 50

Research output

  1. 2022
  2. Published

    COMPOSITES SUSTAINABILITY – MANUFACTURING, REPAIR, AND RECYCLING ARE CHALLENGING

    Schledjewski, R., 22 Nov 2022, Proceedings SE Conference 22 Hamburg.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    A porous capillary tube approach for textile saturation

    Neunkirchen, S., Blößl, Y. & Schledjewski, R., 10 Nov 2022, In: Composites science and technology. 230.2022, 10 November, 9 p., 109450.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Bio-based FRP composites and their circularity potential: Options for environmental assessment

    Kirschnick, U., Kern, H. & Schledjewski, R., 10 Nov 2022.

    Research output: Contribution to conference › Presentation › Research › peer-review

  5. Published

    Bio-based FRP composites and their circularity potential: Options for environmental assessment

    Kirschnick, U., Kern, H. & Schledjewski, R., 9 Nov 2022.

    Research output: Contribution to conference › Paper › peer-review

  6. Published

    Inline tape width control for thermoplastic automated tape layup

    Yadav, N. & Schledjewski, R., 21 Oct 2022, In: Composites Part A: Applied Science and Manufacturing. 163.2022, December, 9 p., 107267.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Circularity and sustainability of biobased polymer/natural fiber reinforced composite

    Ravindran, B. & Schledjewski, R., 20 Oct 2022.

    Research output: Contribution to conference › Presentation › Research › peer-review

  8. Published

    Gel Point Determination in Resin Transfer Molding Process with Fiber Bragg Grating Inscribed in Side-Hole Elliptical Core Optical Fiber

    Wachtarczyk, K., Bender, M., Fauster, E., Schledjewski, R., Gąsior, P. & Kaleta, J., 19 Sept 2022, In: Materials. 15.2022, 18, 14 p., 6497.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Dry fiber filament winding - Fundamentals and challenges

    Neunkirchen, S. & Schledjewski, R., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  10. Published

    Compressibility and Relaxation Characteristics of Bindered Non-Crimp-Fabrics Under Temperature and Injection Fluid Influence

    Bender, M. & Fauster, E., 29 Aug 2022, Proceedings of the Munich Symposium on Lightweight Design 2021: Tagungsband zum Münchner Leichtbauseminar 2021. 1 ed. Heidelberg: Springer Vieweg, p. 44-58 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Capillary Driven Saturation of Textile Reinforcing Structures Proposal for an Extension of Lucas-Washburn Equation

    Schledjewski, R., Blößl, Y. & Neunkirchen, S., 22 Jul 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). Trans Tech Publications, p. 1372-1378 7 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Mechanical flexible composites from renewable resources

    Schwaiger, M., Bender, M. & Resch-Fauster, K., 21 Jul 2022, Book of Abstracts - Verbund 2022.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    A COMPARISON OF DIFFERENT NATURAL FIBER REINFORCED COMPOSITES USING RTM & VARI PROCESS

    Ravindran, B., Ekam, M., Kirschnick, U., Le Vély, G., Salzmann, M., Schledjewski, R. & Schmid, S., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Experimental validation of the porous tube model for capillary rise

    Neunkirchen, S., Blößl, Y. & Schledjewski, R., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Recycling GFRP composites: How to assess environmental performance?

    Kirschnick, U., Krempl, N. & Schledjewski, R., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Adapting the optical reflectivity of carbon fiber reinforced polymers on the nano-scale: Matrix vs. fiber modification

    Haiden, L., Feuchter, M., Barbezat, M., Pansare, A., Brunner, A. J., Neunkirchen, S. & Pinter, G. G., Jul 2022, European Polymer Congress - Book of Abstracts. p. 282

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Using Near-Infrared-Spectroscopy for quality inspection of prepregs before processing

    Salzmann, M., Schledjewski, R. & Teuchtmann, M., 27 Jun 2022.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Experimental validation of the porous tube model for capillary rise

    Neunkirchen, S., Blößl, Y. & Schledjewski, R., 20 Jun 2022, 23. Symposium Verbundwerkstoffe und Werkstoffverbunde – Abstract Booklet. DGM, p. 28 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    The influence of recyclates on the mechanical and long-term properties of virgin materials

    Hinczica, J., Geier, J., Kirschnick, U., Holzer, C., Frank, A. & Pinter, G. G., 11 Apr 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry

    Yadav, N. & Schledjewski, R., 6 Apr 2022. 2 p.

    Research output: Contribution to conference › Paper

  21. Published

    The influence of recyclates on the mechanical and long-term properties of virgin materials

    Hinczica, J., Geier, J., Kirschnick, U., Holzer, C., Frank, A. & Pinter, G. G., 4 Apr 2022.

    Research output: Contribution to conference › Paper › peer-review

  22. Published

    In-line residual strain monitoring for thermoplastic automated tape layup using fiber Bragg grating sensors

    Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 5 Jan 2022, In: Polymer Composites. 43.2022, 3, p. 1590-1602 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    High-performance composite with 100% bio-based carbon content produced from epoxidized linseed oil, citric acid and flax fiber reinforcement

    Todorovic, A., Blößl, Y., Oreski, G. & Resch-Fauster, K., Jan 2022, In: Composites Part A: Applied Science and Manufacturing. 152.2022, January, 9 p., 106666.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Challenges in the use of highly birefringent fiber bragg gratings for strain sensing in composites

    Wachtarczyk, K., Bender, M., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Abstract

  25. Published

    DETERMINATION OF A RACETRACKING PASS-FAIL CRITERION FOR EDGE FLOW PERMEABILITY MEASUREMENT

    George, A., Huntsman, M., Koorevaar, A., Fauster, E. & May, D., 2022, Characterization. Vassilopoulos, A. P. & Michaud, V. (eds.). p. 733-740 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    EXPERIMENTAL CHARACTERIZATION OF TRANSVERSE FABRIC COMPRESSIBILITY BY MEANS OF IN-SITU-IMPREGNATION

    Bender, M. & Fauster, E., 2022.

    Research output: Contribution to conference › Paper

  27. Published

    Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry

    Yadav, N. & Schledjewski, R., 2022.

    Research output: Contribution to conference › Abstract

  28. Published

    Inline NDT for thermoplastic Automated Tape Layup

    Yadav, N., Oswald-Tranta, B. & Schledjewski, R., 2022.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Machine Learning Based Tape Width Prediction for the Thermoplastic Automated Tape Placement Process

    Legenstein, A. & Schledjewski, R., 2022, Composites meet Sustainability – Proceedings of the 20th European Conference on Composite Materials. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Monitoring of thermoplastic composites with an FBG inscribed in highly-birefringent optic fiber

    Wachtarczyk, K., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Abstract

  31. Published

    NDE optical based methods for liners assessment for hydrogen storage

    Wachtarczyk, K., Gąsior, P., Kaleta, J. & Yadav, N., 2022.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Residual strain and structural health monitoring for automated tape layup using HiBi FBG sensor

    Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Residual strain and structural health monitoring for automated tape layup using HiBi FBG sensor

    Yadav, N., 2022.

    Research output: Contribution to conference › Abstract

  34. Published

    Soft composites from bio-based resources

    Schwaiger, M., Bender, M., Taesler, J., Schirmer, H. & Resch-Fauster, K., 2022, Proceedings of the 20th European Conference on Composite Materials - Composites meet sustainability.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Verbundwerkstoffe auf Basis vitrimerer Polymersysteme: Verarbeitungsverhalten und Umformanalyse

    Stryzek, M., 2022

    Research output: Thesis › Master's Thesis

  36. 2021
  37. Published

    In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber

    Wachtarczyk, K., Gąsior, P., Kaleta, J., Anuszkiewicz, A., Bender, M., Schledjewski, R., Mergo, P. & Osuch, T., 31 Dec 2021, In: Materials. 15.2022, 1, 16 p., 77.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Instrumentation of an Inspection Test Rig for Geometry Measurement of Fiber Bundles in Automated Composite Manufacturing

    Neunkirchen, S., Fauster, E., Lehner, S. & O'Leary, P., 13 Dec 2021, In: IEEE transactions on instrumentation and measurement. 71

    Research output: Contribution to journal › Special issue › Research › peer-review

  39. Published

    Usage of Near-Infrared Spectroscopy for Inline Monitoring the Degree of Curing in RTM Processes

    Salzmann, M., Blößl, Y., Todorovic, A. & Schledjewski, R., 17 Sept 2021, In: Polymers. 13.2021, 18, 13 p., 3145.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Methodenentwicklung zur kohärenten Charakterisierung bebinderter Verstärkungstextilen bei erhöhter Temperatur

    Bender, M. & Fauster, E., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Thermoforming and Process Simulation of bio-based Form Sheets for Aircraft Applications (BioForS)

    Legenstein, A., Salzmann, M. & Schledjewski, R., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  42. E-pub ahead of print

    Ply-by-ply inline thermography inspection for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Wachtarczyk, K., 13 Sept 2021, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 7.2021, 3-4, p. 49-59 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Bio-based Form Sheets for Aircraft Applications (BioForS)

    Legenstein, A., Salzmann, M. & Schledjewski, R., 12 Sept 2021, 29th Leoben-Conference on Polymer Engineering and Science: 50 Years Polymer Engineering and Science at Montanuniversität Leoben. Friesenbichler, W. (ed.). Leoben, Vol. 10.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Holistic approach towards quality assurance for thermoplastic Automated Tape Layup

    Yadav, N. & Schledjewski, R., Sept 2021.

    Research output: Contribution to conference › Poster › Research

  45. Published

    In- and off-line NDT in automated in-situ consolidation tape layup

    Yadav, N., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., Sept 2021, SAMPE EUROPE Conference and Exhibition 2021: Baden, Switzerland, 28-30 September 2021.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

    Yong, A., Aktas, A., May, D., Endruweit, A., Advani, S. G., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allen, T., Berg, D. C., Bickerton, S., Brauner, C., Brütsch, D., Caglar, B., Causse, P., Chiminelli, A., Cohades, A. & Comas-Cardona, S. & 32 others, Danzi, M., Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., Garcia-Manrique, J. A., Grishaev, V., Guilloux, A., Hancioglu, M., Harazi, W., Herman, T., Huang, W., Kabachi, M. A., Keller, A., Kind, K., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Long, A., Masania, K., Michaud, V., Middendorf, P., Salvatori, D., Schubnel, R., Sharp, N., Sozer, E. M., Thomas, J., Trochu, F., Umer, R., Valette, J., Wang, J. H. & Willenbacher, B., Sept 2021, In: Composites Part A: Applied Science and Manufacturing. 148.2021, September, 16 p., 106480.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Tack measurement of bindered rovings for the dry fiber winding process

    Neunkirchen, S. & Schledjewski, R., Sept 2021, In: Polymer Composites. 42, 9, p. 4607-4616 10 p., 26172.

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Equation for modelling energy transfers in multi-phase flows through porous media, optimised for liquid composite moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 20 Aug 2021, (E-pub ahead of print) In: International journal of heat and mass transfer. 181.2021, December, 8 p., 121856.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Natural fibre reinforced thermoplastic sheet material: Thermoforming behaviour and process simulation: Thermoforming and Process Simulation

    Legenstein, A., Salzmann, M. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Spektroskopische Analyse von Prepregs (SAPP)

    Salzmann, M. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    What to do with the waste? Options for GFRP and CFRP waste treatment along the value chain

    Kirschnick, U. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Validation of Selected Optical Methods for Assessing Polyethylene (PE) Liners Used in High Pressure Vessels for Hydrogen Storage

    Gąsior, P., Wachtarczyk, K., Błachut, A., Kaleta, J., Yadav, N., Ozga, M. & Baron, A., 18 Jun 2021, In: Applied Sciences : open access journal. 11.2021, 12, 20 p., 5667.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 2701