Chair of Polymer Processing (350)

Organisational unit: Chair

401 - 450 out of 946Page size: 50

Research output

  1. 2016
  2. Published

    Effect of Compounding Method on Rheological, Thermal and Mechanical Behavior of Blast Furnace Slag Filled Polystyrene Compounds

    Mostafa, H., Pacher, G., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    Nanocomposites and filled Polymers

    Holzer, C., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  4. Published

    Simulation of the Influence of Thermal Properties of the Mould Steel on the Injection Moulding Process

    Holzer, C., Lucyshyn, T. & Des Enffans D'Avernas, L.-V., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, p. 299. 1 p.

    Research output: Contribution to conference › Abstract

  6. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, 32nd International Conference of the POLYMER PROCESSING SOCIETY. Maazouz, A. (ed.). Lyon, France, Vol. 32. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Upcycling of POM for Catch Springs by Using the Rec2TecPart Process

    Katschnig, M. & Holzer, C., 25 Jul 2016, The Digital Book of Abstracts. 32nd International Conference of the POLYMER PROCESSING SOCIETY, p. 287 S16-623

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Erfahrungsbericht/H2020-Factories of the Future Projekt REProMag: Resource Efficient Production of Magnets

    Schuschnigg, S., 8 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  9. Published

    Models to Predict the Viscosity of Metal Injection Molding Feedstock Materials as Function of Their Formulation

    Gonzalez-Gutierrez, J., Duretek, I., Kukla, C., Poljšak, A., Bek, M., Emri, I. & Holzer, C., 28 May 2016, In: Metals : open access journal . 6.2016, 6, p. 129-146 17 p., 129.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Instrumented injection mold for the measurement of demolding energies of micro-structured parts

    Holzer, C., 20 May 2016.

    Research output: Contribution to conference › Presentation › Research

  11. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 19 May 2016, p. 2-5. 4 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Entwicklung von Polyolefinen für den Fused Filament Fabrication (FFF) Prozess

    Spörk, M., Schuschnigg, S. & Holzer, C., 14 May 2016.

    Research output: Contribution to conference › Poster › Research

  13. Published

    MaP "Additive Manufacturing" Lecture Series - Polymer-Implants

    Holzer, C., 26 Apr 2016.

    Research output: Contribution to conference › Presentation › Education

  14. Published

    Einfluss des relativen Druckwinkels auf die Oberflächentopologie von mittels FFF-Technik 3D-gedruckten Bauteilen

    Haar, B., Walluch, M., Anna, U., Katschnig, M. & Holzer, C., 14 Apr 2016, p. 191-192. 2 p.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Entwicklung von Polyolefinen für den Fused Filament Fabrication Prozess

    Spörk, M., Schuschnigg, S. & Holzer, C., 14 Apr 2016, p. 203-204. 210 p.

    Research output: Contribution to conference › Abstract

  16. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung- vom Werkstoff zum Produkt. Pinter, G. & Pilz, G. (eds.). Leoben, Austria, Vol. 25. p. 187-188 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Haftungsvorhersage und Haftungsverbesserung im Fused Filament Fabrication (FFF) Prozess

    Schuschnigg, S., Huber, P., Holzer, C. & Spörk, M., 14 Apr 2016.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Haftungsvorhersage und Haftungsverbesserung im Fused Filament Fabrication (FFF) Prozess

    Schuschnigg, S., Huber, P., Spörk, M. & Holzer, C., 14 Apr 2016, p. 201. 2 p.

    Research output: Contribution to conference › Abstract

  19. Published

    iPrint - Personalisierte Kranialimplantate mittels Fused Filament Fabrication

    Katschnig, M., Haar, B., Holzer, C., Ücal, M., Schäfer, U., von Campe, G. & Zefferer, U., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt. Leoben, Vol. 06. p. 121-125 5 p. (Schriftenreihe Kunststofftechnik Leoben).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Neue additive Produktionstechnologien für die Holzindustrie

    Duretek, I., Müller, U., Veigel, S., Haider, A., Frybort, S. & Holzer, C., 14 Apr 2016, p. 185-186. 2 p.

    Research output: Contribution to conference › Abstract

  21. Published

    Neue additive Produktionstechnologien für die Holzindustrie

    Duretek, I., Müller, U., Veigel, S., Haider, A., Frybort, S. & Holzer, C., 14 Apr 2016. 1 p.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Rec2TecPart - Ein neuer Prozess für Funktionsbauteile aus Sekundärrohstoffen

    Katschnig, M., Brendinger, C. & Holzer, C., 14 Apr 2016, p. 193-194. 2 p.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., Apr 2016, p. 1.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Biocompatibility of FDM printed PEEK is comparable to cranial bone properties; FDM printed PEEK is thereby a suitable material for cranial implants

    Schäfer, U., von Campe, G., Ücal, M., Tax, A., Katschnig, M. & Holzer, C., 30 Mar 2016, Front. Bioeng. Biotechnol. Conference Abstract: 10th World Biomaterials Congress.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Durchgängige Simulationskette von der Konstruktion bis zur Spannungsbewertung

    Mösenbacher, A., Lucyshyn, T., Pußwald, S. & Primetzhofer, A., 15 Mar 2016, p. 1. 28 p.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Neue Materialien im Fused Filament Fabrication (FFF) Verfahren

    Schuschnigg, S., 11 Mar 2016.

    Research output: Contribution to conference › Presentation › Transfer

  27. Published

    Kunststoffe - Fluch oder Segen?

    Lucyshyn, T., 3 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Grundlage für eine erfolgreiche Verarbeitung - genaue Materialkenntisse

    Holzer, C., 2 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Die Faserorientierung auf dem Prüfstand – Hinterfragung der Erwartungshaltung in der Lebensdauerabschätzung

    Mösenbacher, A., Müller, F., Primetzhofer, A. & Lucyshyn, T., 26 Feb 2016. 16 p.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Simulation des Einflusses der thermischen Eigenschaften des Werkzeugstahls auf den Spritzgießprozess

    Lucyshyn, T., 26 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Wetting behavior of polymer melts on coated and uncoated tool steel surfaces

    Zitzenbacher, G., Huang, Z., Längauer, M., Forsich, C. & Holzer, C., 16 Feb 2016, In: Journal of Applied Polymer Science. 133.2016, 21, 10 p., 43469.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Auswirkung der Materialeigenschaften von ungefüllten und holzgefüllten Biopolymeren für die Anwendung von Fused Filament Fabrication

    Mooslechner, P., 2016

    Research output: Thesis › Master's Thesis

  33. Published

    Compoundierung von Filamenten für medizinische FFF-Anwendungen

    Payr, B., 2016

    Research output: Thesis › Master's Thesis

  34. Published

    Coupled Orientation and Stretching of Chains in Mesoscale Models of Polydisperse Linear Polymers in Startup of Steady Shear Flow Simulations

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: Macromolecular Theory and Simulations.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Dissipative Particle Dynamics Models of Orientation of Weakly-Interacting Anisometric Silicate Particles in Polymer Melts under Shear Flow: Comparison with the Standard Orientation Models

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: Macromolecular Theory and Simulations.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Dissipative particle dynamics simulations of orientation of layered silicate particles embedded in polymer melts under shear flows

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, In: AIP Conference Proceedings. 050010.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Filling Behavior of Wood Plastic Composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 2016, In: Journal of Civil Engineering and Architecture. 10, p. 1236-1243 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Improvement of the physical-mechanical and optical properties of the packaging production through coating with aqueous polymer dispersion in accordance with the environmental protection requirements

    Bozhkova, T., Boeva, R., Spiridonov, I., Nedelchev, Y., Sapkota, J., Kašiković, N., Dedijer, S. & Pal, M., 2016.

    Research output: Contribution to conference › Poster › Research

  39. Published

    Non-Contact Measurement of Circular Surfaces via Photometric Stereo in Polar Coordinates

    Radler, B., Harker, M., O'Leary, P. & Lucyshyn, T., 2016

    Research output: Other contribution › Research

  40. Published

    Optimierte Entformung mikrostrukturierter Spritzgussbauteile durch Werkzeugbeschichtungen

    Windischbauer, L., 2016

    Research output: Thesis › Master's Thesis

  41. Published

    Optimization of twin screw extrusion using CFD for polymer/nanoclay composites

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 2016, In: AIP Conference Proceedings.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Rheometry of polymer melts using processing machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, In: Korea-Australia Rheology Journal. 28, 3, p. 167-174 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Rheometry of Polymer Melt using Processing Machines

    Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, The 16th Internaional Symposium on Applied Rheology (ISAR). Korea, p. 2-5 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2016, p. 189. 190 p.

    Research output: Contribution to conference › Abstract

  46. Published

    Study of the formation of globule-like surface microstructures on polyacrylamide nano-films synthesized via electro-polymerization process

    Shahsavan, F., Gooneie, A., Shoja Chaykar, A., Shahkaram, M. & Eslami, H., 2016, In: AIP Conference Proceedings. 110002.

    Research output: Contribution to journal › Article › Research › peer-review

  47. 2015
  48. Published

    Enhancing the temperature stability of PLA by compounding strategies

    Laske, S., Ziegler, W., Kainer, M., Wuerfel, J. & Holzer, C., 1 Dec 2015, In: Polymer engineering and science. 55, 12, p. 2849-2858 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Study of rheological behaviour of stainless steel feedstock taking into account the thermal effects

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J., Gooneie, A. & Holzer, C., 30 Nov 2015, IBEREO’15 IBERIAN RHEOLOGY CONFERENCE. Rasteiro, M. G. (ed.). Coimbra, Portugal: Universidad Nacional de Colombia, p. 50-53 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Fließverhalten hochgefüllter Kunststoffe

    Duretek, I., 26 Nov 2015, 24. Leobener Kunststoff-Kolloquium. Leoben, p. 57-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Apparatus for measuring friction inside granular materials— Granular friction analyzer

    Bek, M., Gonzalez-Gutierrez, J., Moreno Lopez, J. A., Bregant, D. & Emri, I., 24 Nov 2015, In: Powder technology : an international journal on the science and technology of wet and dry particulate systems. 288, 2016, p. 255-265 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Effect of selective localization of carbon nanotubes in pa6 dispersed phase of PP/PA6 blends on the morphology evolution with time, part 2: Relaxation of deformed droplets after cessation of flow

    Gooneie, A., Nazockdast, H. & Shahsavan, F., 12 Oct 2015, In: Polymer engineering and science. 56.2016, 1, p. 51-60 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...5 6 7 8 9 10 11 12 ...19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501