Chair of Polymer Processing (350)
Organisational unit: Chair
Research output
- 2022
- Published
Metal Injection Molding of Low Alloy Steel by Using a Palm Stearin/HDPE Binder System
Momeni, V., Dec 2022, Key engineering materials. (Key engineering materials).Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
The effect of carbon fiber content on physico-mechanical properties of recycled poly(ethylene terephthalate) composites additively manufactured with fused filament fabrication
Katalagarianakis, A., Van de Voorde, B., Pien, N., Polyzos, E., Duretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Van Hemelrijck, D., Van Vlierberghe, S. & Pyl, L., Dec 2022, In: Additive Manufacturing. 60.2022, Part A, December, 14 p., 103246.Research output: Contribution to journal › Article › Research › peer-review
- Published
Determination of thermal conductivity of six thermoplastic compounds
Duretek, I., 28 Nov 2022, 11 p.Research output: Book/Report › Commissioned report › Research
- Published
Determination of pvT-behavior of two various polyolefin-compounds
Duretek, I., 25 Nov 2022, 6 p.Research output: Book/Report › Commissioned report › Research
- Published
Process Optimization of Injection Overmolding Structural Electronics with Regard to Film Distortion
Hubmann, M., Madadnia, B., Groten, J., Pletz, M., Vanfleteren, J., Stadlober, B., Bossuyt, F., Kaur, J. & Lucyshyn, T., 22 Nov 2022, In: Polymers. 14.2022, 23, 20 p., 5060.Research output: Contribution to journal › Article › Research › peer-review
- Published
Dynamic Behavior of Thermally Affected Injection-Molded High-Density Polyethylene Parts Modified by Accelerated Electrons
Mizera, A., Krstulovic-Opara, L., Krempl, N., Karhankova , M., Manas, M., Sanek , L., Stoklasek, P. & Grebo, A., 16 Nov 2022, In: Polymers 2022 / Advances in the Mechanical Behavior of Polymeric Materials). 14:2022, 22, 15 p., 4970.Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks
Sadaf, M., Cano Cano, S., Gonzalez-Gutierrez, J., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály , L., Kitzmantel, M. & Nanni, F., 16 Nov 2022, In: Polymers / Molecular Diversity Preservation International. 14.2022, 22, 23 p., 4962.Research output: Contribution to journal › Article › Research › peer-review
- Published
Pack2theLoop – Closing the circle of polyolefin packaging
Krempl, N., Pinter, E., Jahn, E. & Bichler, L., 9 Nov 2022.Research output: Contribution to conference › Poster › Research
- Published
In-situ alignment of 3D printed anisotropic hard magnets
Suppan, M., Huber, C., Mathauer, K., Abert, C., Bruckner, F., Gonzalez-Gutierrez, J., Schuschnigg, S., Groenefeld, M., Teliban, I., Kobe, S., Saje, B. & Suess, D., 20 Oct 2022, In: Scientific reports (London : Nature Publishing Group). 12.2022, October, 6 p., 17590.Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of Viscose Fibre Geometry on the Structure–Property Relationships of High-Density Polyethylene Composites
Slapnik, J., Kraft, G., Wilhelm, T., Hribernik, M., Švab, I., Lucyshyn, T. & Pinter, G. G., 18 Oct 2022, In: Polymers. 14.2022, 20, 15 p., 4389.Research output: Contribution to journal › Article › Research › peer-review
- Published
Peroxide-Based Crosslinking of Solid Silicone Rubber, Part I: Insights into the Influence of Dicumylperoxide Concentration on the Curing Kinetics and Thermodynamics Determined by a Rheological Approach
Azevedo, M., Monks, A. M., Kerschbaumer, R. C., Schlögl, S. & Holzer, C., 18 Oct 2022, In: Polymers. 14.2022, 20, 22 p., 4404.Research output: Contribution to journal › Article › Research › peer-review
- Published
A Study on Over-Molded Copper-Based Flexible Electronic Circuits
Bakr, M., Hubmann, M., Bossuyt, F. & Vanfleteren, J., 16 Oct 2022, In: Micromachines. 13.2022, 10, 27 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding
Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, In: Steel research international. 94.2022, 4, 7 p., 2200326.Research output: Contribution to journal › Article › Research › peer-review
- Published
Anti-Adhesive Organosilane Coating Comprising Visibility on Demand
Kern, W., Müller, M., Bandl, C., Krempl, N. & Kratzer, M., 24 Sept 2022, In: Polymers. 14.2022, 19, 20 p., 4006.Research output: Contribution to journal › Article › Research › peer-review
- Published
Low-Temperature Fibre Direct Compounding of Cellulose Fibres into PA6
Slapnik, J., Liu, Y., Kupfer, R., Lucyshyn, T., Nardin, B. & Pinter, G., 23 Sept 2022, In: Materials. 15.2022, 19, 14 p., 6600.Research output: Contribution to journal › Article › Research › peer-review
- Published
LightCycle: Upcycling of regenerates and injection moulding into high quality light weight components using a new technological approach
Krempl, N. & Friesenbichler, W., 15 Sept 2022.Research output: Contribution to conference › Poster › Research
- Published
Wear phenomena in injection molding – Novel wear testing device for detecting dissipation effects in wear of plastic mold steels
Zidar, D., 15 Sept 2022, 30th Leoben-Conference on Polymer Engineering & Science Conference Proceeding. Chair of Polymer Processing (ed.). Department of Polymer Engineering and Science, Montanuniversität Leoben, p. 120-131 11 p. (Publication Series Polymer Engineering & Science Leoben; vol. 11).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
A Guide to Additive Manufacturing
Godec, D. (Editor), Gonzalez-Gutierrez, J. (Editor), Nordin, A. (Editor), Pei, E. (Editor) & Alcázar, J. U. (Editor), 14 Sept 2022, 1 ed. 324 p. (Springer Tracts in Additive Manufacturing)Research output: Book/Report › Anthology › Research
- Published
Effect of Increased Powder-Binder Adhesion by Backbone Grafting on the Properties of Feedstocks for Ceramic Injection Molding
Ghasemi-Mobarakeh, L., Cano, S., Momeni, V., Liu, D., Duretek, I., Riess, G., Kukla, C. & Holzer, C., 2 Sept 2022, In: Polymers. 14.2022, 17, 15 p., 3653.Research output: Contribution to journal › Article › Research › peer-review
- Published
Developing a Feedstock for the Fused Filament Fabrication (FFF) of Aluminium
Momeni, V., Shahroodi, Z., Kukla, C. & Holzer, C., Sept 2022, Conference: 2nd International Conference on Polymer Process Innovation.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
