Chair of Polymer Processing (350)

Organisational unit: Chair

851 - 900 out of 946Page size: 50

Research output

  1. 2008
  2. Published

    Preparation of Polymer-Nanocomposite-Masterbatch using a co-rotating twin screw extruder in combination with a melt pump

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G. & Langecker, G., 2008, PPS-24. p. 96-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Qualitätsgesicherte Aufbeereitung von Polymer-Nanocomposites unter Verwendung von in-line NIR-Spektroskopie

    Friesenbichler, W., Kracalik, M. & Laske, S., 2008, Extrusion - Rheologie und neue Technolgien zur Steigerung der Produktvität - Fortbildungsseminar. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Quality control of polymer nanocomposites compounding using small angle x-ray scattering

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M. & Laske, S., 2008, ASPM 2008 - 9th Austrian Polymer Meeting - Book of Abstracts. p. 53-53

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Recycled PET Nanocomposites Improved by Silanization of Organclays

    Kracalik, M., Studenovský, M., Mikesov, J., Sikora, A., Thomann, R., Friedrich, C., Fortelný, I. & Simoník, J., 2008, In: VLK-News. 16. Jahrg., p. 4-13

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Recycled Poly(ethylene terephthalate) Reinforced With Basalt Fibres: Rheology, Structure, and Utility Properties

    Kracalik, M., Pospisil, L., Slouf, M., Mikesova, J., Sikora, A., Simonik, J. & Fortelny, I., 2008, In: Polymer Composites. 29, p. 437-442

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Rheological characterisation of polymer melts on an injection moulding machine using a new slit die measurement system

    Selvasankar, R. K., 2008, 95 p.

    Research output: Thesis › Master's Thesis

  8. Published

    Small angle x-ray scattering as method to determine mechanism of despersion in polypropylene clay nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2008, P2008. p. A32-A32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    To the Detection of Non-metallic Inclusions in Tool Steel Specimens for Polymer Processing Applications

    Gallaun, U., 2008, 89 p.

    Research output: Thesis › Master's Thesis

  10. Published

    Untersuchungen zum abrasiven Verschleiß von niedrig- bzw. hoch legierten Kunststoff-Formenstählen mit einem verbesserten Verschleißmodell

    Weiermair, G., 2008

    Research output: Thesis › Diploma Thesis

  11. Published

    Untersuchungen zur Wärmeleitfähigkeit von Polypropylen mit mikroskaligen Füllstoffen bei hohen Drücken

    Kucher, C., 2008

    Research output: Thesis › Diploma Thesis

  12. Published

    δ-phase characterization of superalloy Allvac 718 Plus™

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. 2007
  14. Published

    Investigations of the Rheology and Reactivity of Extrudable Wood-Resin Compounds

    Braun, J., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 3 Apr 2007, In: Monatshefte für Chemie = Chemical monthly. 138.2007, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Simulation des spritzgießprozesses von mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 1 Jan 2007, In: Zeitschrift Kunststofftechnik = Journal of plastics technology. 1

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Abhängigkeit des Exfolierungsgrades von Silikatschichten in einer Polymermatrix vom Compatibilizer - Nanoclay Mischverhältnis

    Laske, S., Kracalik, M., Gschweitl, M. & Langecker, G., 2007, 12 Problemseminar "Polymermischungen" Gefüllte und verstärkte Polymerblends - Nanoblends. p. 20-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., Berger, G. & Perko, J., 2007, PPS-23 Program and Book of Abstracts. p. 176-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions: PPS-23 The Polymer Processing Society 23rd Annual Meeting

    Friesenbichler, W., Berger, G. & Perko, J., 2007

    Research output: Non-textual form › Web publication/site › Research

  20. Published

    Aufbau und Inbetriebnahme einer Anlage zur Herstellung von exfolierten Nanocomposites

    Gschweitl, M., 2007

    Research output: Thesis › Diploma Thesis

  21. Published

    Aufheizen des Halbzeugs beim Thermoformen

    Fertschej, A., 2007, Fachtagung Thermoformen technische Bauteile - Vom Design zum Fertigteil. p. 1-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Berechnungsmodell für Maddock- und Wendelscherteile in der Einschneckenplastifiziertechnologie

    Thiel, H., 2007, 97 p.

    Research output: Thesis › Diploma Thesis

  23. Published

    Calculation of the pressure and the temperature development in the solid conveying zone of grooved extruders

    Schuschnigg, S. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 74-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Calculation of the pressure and the temperature development in the solid conveying zone of grooved extruders: PPS-23 The Polymer Processing Society 23rd Annual Meeting

    Langecker, G. & Schuschnigg, S., 2007

    Research output: Non-textual form › Web publication/site › Research

  25. Published

    Charakterisierung von Spritzgieß-Formteiloberflächen

    Berger, G., Friesenbichler, W. & Gruber, D. P., 2007, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 2-3

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Druckentwicklung in der Feststoffförderzone

    Schuschnigg, S. & Langecker, G., 2007, In: VLK-News. 3+4, p. 4-10

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Expertensystem für die Entwicklung spritzgegossener Formteile aus polymeren Werkstoffen

    Fischer, K., 2007, 182 p.

    Research output: Thesis › Doctoral Thesis

  28. Published

    Expertensystem Spritzgießtechnik: Vom Design bis zum qualitätsgeprüften Formteil

    Langecker, G., Fischer, K., Lucyshyn, T., Fertschej, A. & Hirner, M., 2007,

    H.F. Mark Symposium 2007 - Fortschritte auf dem Gebiet der Elastomere & Thermoplastischen Elastomere

    .     p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Fast Determination of Reinforcement in Polymer Nanocomposites

    Kracalik, M., Laske, S., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2007, NanoEurope 2007. p. 13-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Herstellung und Charakterisierung von hochgefuellten Folien aus thermoplastischem Polyester

    Wratschko, G., 2007, 131 p.

    Research output: Thesis › Diploma Thesis

  31. Published

    Neue Erkenntnisse zur Plastifiziereinheit von Spritzgießmaschinen basierend auf experimentellen Untersuchungen

    Gornik, C. J., 2007, 180 p.

    Research output: Thesis › Doctoral Thesis

  32. Published

    Optical measuring technique for the verification of warpage computations with moldflow plastics insight (MPI)

    Fischer, K., Wassertheurer, M., Lucyshyn, T. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 83-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Recycled PET Nanocomposites Improved by Silanization of Organoclays

    Kracalik, M., Studenovsky, M., Mikesova, J., Sikora, A., Thomann, R., Friedrich, C., Fortelny, I. & Simonik, J., 2007, In: Journal of Applied Polymer Science. 106, p. 926-937

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Recycled PET-organoclay nanocomposites with enhanced processing properties and thermal stability

    Kracalik, M., Studenovsky, M., Mikesova, J., Kovarova, J., Sikora, A., Thomann, R. & Friedrich, C., 2007, In: Journal of Applied Polymer Science. 106, p. 926-937

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Rheological Properties in Relation to Structure of Virgin and Recycled Polyehyleneterephthalate-Organoclay Nanocomposites

    Kracalik, M., Laske, S. & Langecker, G., 2007, 12. Problemseminar "Polymermischungen" Gefüllte und verstärkte Polymerblends - Nanoblends. p. 37-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Simulation der Spritzgießprozesses von Mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 2007, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 3, p. 1-26

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Simulation des Aufheizvorgangs beim Thermoformen

    Fertschej, A., Langecker, G. & Kertz, J., 2007, In: Kunststoffe. 97, p. 62-65

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Simulation fo the heating step within the thermoforming process using the finite difference method

    Fertschej, A. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 113-113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Simulation of the Heating Cycle during Thermoforming

    Fertschej, A., Langecker, G. & Kertz, J., 2007, In: Kunststoffe. 97, p. 37-39

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Untersuchungen zu Schwindung und Verzug von Schachtelformteilen mit verschiedenen Wanddickenkombinationen

    Zaucher, P., 2007

    Research output: Thesis › Diploma Thesis

  41. 2006
  42. Published

    19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung

    Friesenbichler, W. (Editor) & Laske, S. (Editor), 2006, Eigenverlag.

    Research output: Book/Report › Book › Research

  43. Published

    Abrasive/corresive Wear on Plastic Mould Steels, measured under practical conditions

    Friesenbichler, W., Langecker, G. & Caliskanoglu, D., 2006, Tooling Materials and their applications from research to market. p. 267-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    A Desgin Support System for Plastic Injection Molds: 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., Lucyshyn, T. & Fischer, K., 2006

    Research output: Non-textual form › Web publication/site › Research

  45. Published

    A Design Support System for Plastic Injection Molds

    Fischer, K., Lucyshyn, T. & Langecker, G., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 216-216

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    A new practical testing apparatus to evaluate corrision on plastic mold steel

    Friesenbichler, W., Berger, G., Langecker, G., Caliskanoglu, D., Hiebeler, B. J. & Perko, J., 2006, Tooling materials and their applications from research to market. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Charakterisierung von hochglanzpolierten Werkzeugoberflächen und den damit abgeformten Kunststoffformteilen

    Reitter, M., 2006, 142 p.

    Research output: Thesis › Diploma Thesis

  48. Published

    Detection of Surface Structure and Appearance of Injection Molded Parts.

    Langecker, G., Friesenbichler, W., Berger, G. R. & Gruber, D., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 218-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Detection of Surface Structure and Appearance of Injection Molded Parts. 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., 2006

    Research output: Non-textual form › Web publication/site › Research

  50. Published

    Druckentwicklung in der Feststoffförderzone

    Schuschnigg, S. & Langecker, G., 2006, 19. Leobener Kunststoff Kolloqium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    EXINMOLD: Ein Expertensystem für die Entwicklung von Spritzgießwerkzeugen

    Fischer, K., Langecker, G., Lucyshyn, T. & Hirner, M., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Forschung für die Praxis am Institut für Kunststoffverarbeitung - Ausewählte Beispiele aus den Arbeiten der letzten 17 Jahre

    Friesenbichler, W., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Hochglanzoberflächen von Spritzgussteilen, Herstellung und Charakterisierung

    Friesenbichler, W., Langecker, G., Berger, G., Reitter, M. & Jutz, S., 2006, 19. Leobener Kunststoff Kolloqium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...14 15 16 17 18 19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501