Chair of Polymer Processing (350)

Organisational unit: Chair

751 - 800 out of 946Page size: 50

Research output

  1. 2009
  2. Published

    Advanced characterization of polymer-clay nanocomposites: application of in-line near infrared spectroscopy and on-line extensional rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, EuroNanoForum 2009 - Nanotechnology for Sustainable Economy - Proceedings. p. 222-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Advanced characterization of polymer-clay nanocomposites: application of in-line near infrared spectroscopy and on-line extensional rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Advanced compounding: extrusion of polypropylene nanocomposites using the melt pump

    Kracalik, M., Laske, S., Gschweitl, M., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 113, p. 1422-1428

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Advanced Compounding of Polymer Nanocomposites by assembling a melt pump

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Advanced Compounding of Polymer Nanocomposites using a Melt Pump

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 148-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Assessment of Material Properties during compounding of Polymer Nanocomposites using In-Line near Infrared Spectroscopy

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 150-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Aufbau und Inbetriebnahme einer FT-NIR Anlage an einem gleichlaufenden Doppelschneckenextruder

    Witschnigg, A., 2009

    Research output: Thesis › Diploma Thesis

  9. Published

    A Wizard to Get the Processing Conditions for Injection Molds

    Fertschej, A., Friesenbichler, W. & Windhager, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    A Wizard to Get the Processing Conditions for Injection Molds

    Fertschej, A., Friesenbichler, W., Windhager, W. & Meister, M., 2009

    Research output: Non-textual form › Web publication/site › Research

  11. Published

    Berechnung von Extrusionsschnecken

    Schuschnigg, S., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Biopolymer Paper for Laser Printing Applications

    Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P., Burkhalter, R. & Langecker, G., 2009, PPS-25 Program & Abstracts. p. 78-78

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Biopolymer Paper for Laser Printing Applications: 25th Annual Meeting of the Polymer Processing Society

    Langecker, G., Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P. & Burkhalter, R., 2009

    Research output: Non-textual form › Web publication/site › Research

  14. Published

    Calculation of Residual Stresses in the Insert Molding Process Using the Finite Element Method

    Kisslinger, T., Fischer, K., Lucyshyn, T. & Langecker, G., 2009

    Research output: Non-textual form › Web publication/site › Research

  15. Published

    Characterization of the strain distribution around crack tips in unfilled and nanofilled polypropylene using in situ synchrotron small and wide angle scanning scattering techniques

    Feuchter, M., Maier, G., Zizak, I., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, EPF'09 european polymer congress. p. 120-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Compoundieren

    Witschnigg, A., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Conception, calculation and analysis of a crosshead with double-coathanger distributor for physically foamed polyethylenes

    Richling, M. W., 2009

    Research output: Thesis › Master's Thesis

  18. Published

    Demolding Forces and Coefficients of Friction in Injection Molding. A new Mold and first results

    Berger, G., Friesenbichler, W., Schöfer, G. & Freudenschuß, G., 2009, In: Purasuchikkusu-eji = Plastics age. 55, p. 87-94

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Demolding forces and coefficients of friction in injection molding. A new practical measurement apparatus

    Berger, G. & Friesenbichler, W., 2009, Proceedings of ANTEC 2009. p. 1699-1703

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, 2008 MRS Fall Meeting Symposium. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Einfluss der spezifischen Wärmekapazität auf die Verzugsberechnung in Moldflow Plastics Insight (MPI) und experimentelle Validierung

    Schlattinger, P., 2009

    Research output: Thesis › Master's Thesis

  22. Published

    Einsatz von Talkum und Zeolith in Kunststoff-Compounds

    Piontek, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Entformungskräfte beim Spritzgießen in Abhängigkeit von Oberflächenrauigkeit, Stahlwerkstoff, Vorzugsrichtung der Oberflächenstruktur, Beschichtung und Kunststofftyp

    Burgsteiner, M., 2009, 237 p.

    Research output: Thesis › Master's Thesis

  24. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 111, p. 2253-2259

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: VLK-News. 17. Jahrg., p. 6-8

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    EXINMOLD

    Lucyshyn, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Expansion injection moulding

    Rajganesh Jegadeesan, X., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Expansionsspritzgießverfahren

    Rajganesh Jegadeesan, X., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Flachfolien Coextrusion

    Piontek, M., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    From micro to advanced compounding: the way for applications of polymer nanocomposites

    Kracalik, M., Laske, S. & Holzer, C., 2009, Conference Proceedings NanoCon 2009 1st Conference with international participation. p. 38-38

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    FT-NIR as a determination method for reinforcement of polymer nanocomposites

    Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W., Haberkorn, M. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 114, p. 2488-2496

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Heizzeitverkürzung für den Elastomerspritzguss mittels eines Heiz-Scher-Mischteiles

    Perko, L., 2009

    Research output: Thesis › Master's Thesis

  33. Published

    Improved quality with smart moulds

    Kukla, C., 2009, ICIT&MPT 2009 Conference Proceedings . p. 169-172

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Industrial Production of Polymer Nanocomposites

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G. & Langecker, G., 2009, APT09 - Advandes in Plastics Technology - Abstracts of Papers. p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Influence of cavity pressure and injection rate on the surface roughness of PP, PC, ABS and ABS-PC

    Pacher, G., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Influence of cavity pressure and injection rate on the surface roughness of PP, PC, ABS and ABS-PC

    Pacher, G., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Influence on Demolding in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Influence on Demolding in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Influences of steel grade and surface roughness on demolding forces in injection molding

    Berger, G., Friesenbichler, W. & Perko, J., 2009, Proceedings TOOL09. p. 25-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Influences of Surface Roughness and Polypropylene Grade on Demolding Forces and Coefficients of Friction

    Berger, G., Friesenbichler, W., Burgsteiner, M. & Lorenz, B., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Influences of Surface Roughness and Polypropylene Grade on Demolding Forces and Coefficients of Friction

    Berger, G., Friesenbichler, W. & Burgsteiner, M., 2009

    Research output: Non-textual form › Web publication/site › Research

  42. Published

    In-line characterization and quality control of PP nanocomposites using FT-NIR spectroscopy

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    In-line quality control of polymer nanocomposites using near-infrared spectroscopy

    Laske, S., Witschnig, A., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Langecker, G. R. & Holzer, C., 2009, NANOCON 2009 - 1st International Conference, Conference Proceedings. p. 120-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    "In-line" quality control of polymer nanocomposites using near-infrared spectroskopy

    Laske, S., Kracalik, M. & Holzer, C., 2009, Conference Proceedings NanoCon 2009 1st Conference with international participation. p. 38-39

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Intelligente Hochleistungsmesstechnik

    Gallaun, U., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Lösungskompetenz unter einem Dach

    Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Measurement of pressure dependent viscosity and its influence on injection moulding simulation

    Holzer, C., Lucyshyn, T., Friesenbichler, W. & Duretek, I., 2009,

    Programme & Abstracts of PPS 2009

    .     p. 153-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Messprinzipien von NIR und Rheotens

    Witschnigg, A., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Messung von pvT-Daten bei prozessnahen Abkühlraten und deren Einfluss auf die Simulation von Schwindung und Verzug mit Moldflow Plastics Insight

    Lucyshyn, T., 2009

    Research output: Thesis › Doctoral Thesis

  50. Published

    Nanostructuring of surfaces for new functionalities

    Holzer, C., Gobrecht, J., Solak, H. H., Altana, C. & Hofmann, C., 2009, Vortrag und Proceedings zum 7th International Nanotechnology Symposium. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    New Rheological Injection Mould to Measure Pressure Dependent Viscosity in High Shear Rate Range

    Friesenbichler, W., Rajganesh Jegadeesan, X., Duretek, I. & Ramesh Kumar, S., 2009,

    PPS-25 Program & Abstracts

    .     p. 185-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...12 13 14 15 16 17 18 19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501