Chair of Polymer Processing (350)

Organisational unit: Chair

51 - 100 out of 946Page size: 50

Research output

  1. 2024
  2. Published

    Investigating Hydrogen Diffusion in Filled Polymers with Simple Geometries: An ABAQUS Simulation Study

    Graf, A. L., 2024

    Research output: Thesis › Master's Thesis

  3. Published

    Material data determination of liquid silicone rubber: characterization methods for a reliable injection moulding simulation

    Azevedo de Freitas, M., 2024

    Research output: Thesis › Doctoral Thesis

  4. Published

    Material Selection and Process Development of Droplet Based Additive Manufacturing for Medical Implants

    Hentschel, L., 2024

    Research output: Thesis › Doctoral Thesis

  5. Published

    Polylactic Acid (PLA) as Backbone for the Fused Filament Fabrication (FFF) of Aluminium

    Kukla, C., Momeni, V., Schuschnigg, S. & Holzer, C., 2024, Proceedings - Euro PM 2024 Congress and Exhibition. (Proceedings - Euro PM 2024 Congress and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Wareneingangskontrolle von rezyklierten und Neuware-Polypropylenen mittels Folienextrusion

    Wögerbauer, V., 2024

    Research output: Thesis › Master's Thesis

  7. 2023
  8. Published

    Investigating the Aging Behavior of High-Density Polyethylene and Polyketone in a Liquid Organic Hydrogen Carrier

    Surisetty, J. S. S., Sharifian, M., Lucyshyn, T. & Holzer, C., 15 Nov 2023, In: Polymers. 15.2023, 22, 14 p., 4410.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Revolutionizing fiber-reinforced thermoplastic composite recycling : the LightCycle project's journey towards energy-efficient upcycling and quality material regeneration

    Krempl, N. & Shahroodi, Z., 1 Nov 2023, 60th Ilmenau Scientific Colloquium. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Bestimmung des pvT-Verhaltens für unterschiedliche MIM-Feedstocks

    Duretek, I., 24 Oct 2023, Leoben. 8 p.

    Research output: Book/Report › Commissioned report › Research

  11. Published

    Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

    Main, P., Petersmann, S., Wild, N., Feuchter, M., Duretek, I., Edeleva, M., Ragaert, P., Cardon, L. & Lucyshyn, T., 18 Oct 2023, In: Polymers. 15.2023, 20, 24 p., 4126.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Material data determination for one ceramic CIM-feedstock for injection molding simulation using SIGMASOFT®

    Duretek, I., 12 Oct 2023, 15 p.

    Research output: Book/Report › Commissioned report › Research

  13. Published

    Material characterisation of industrial textile waste under consideration of various processing conditions

    Jenull, U., Duretek, I., Lucyshyn, T. & Holzer, C., 9 Oct 2023, Proceedings SARDINIA 2023. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Closing the loop of polypropylene and polystyrene food packaging

    Jahn, E., Fajtak, A., Archodoulaki, M. V., Bichler, L., Pinter, E. & Krempl, N., 13 Sept 2023, p. 1.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Influence of Melt Strength Enhancers on PHB Processing

    Main, P., Lucyshyn, T., Van de Ginste, L. & Cardon, L., 13 Sept 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Effect of LOHC on HDPE and POK under different temperature conditions

    Surisetty, J. S. S., Lucyshyn, T. (Editor) & Holzer, C., 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Influence of processing conditions of industrial textile waste on rheological and thermal material properties

    Jenull, U., Holzer, C. & Lucyshyn, T., 7 Sept 2023, 31st Leoben-Conference on Polymer Engineering and Science: Circular Thinking in Polymer Technology. Leoben, Vol. Volume 12. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Susmagpro

    Schuschnigg, S. & Kukla, C., 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  19. Published

    The effect of coalescence and diffusion on the part generation in the ARBURG plastic freeforming

    Hentschel, L., Maurer, C., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U. & Holzer, C., 7 Sept 2023, p. 1-1. 1 p.

    Research output: Contribution to conference › Poster › Research

  20. Published

    The Effect of Post-industrial Recycled Glass Fiber Flakes on the Rheological Properties of Recycled Polypropylene

    Shahroodi, Z., Krempl, N. (Editor) & Holzer, C. (Co-editor), 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Debinding And Sintering Strategies For Fused Filament Fabrication Of Aluminium Alloys

    Poehle, G., Quadbeck, P., Riecker, S., Kukla, C., Momeni, V. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Filament Development for Metallic Fused Filament Fabrication of Aluminium Alloys

    Kukla, C., Momeni, V., Poehle, G., Riecker, S. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Peroxide-based crosslinking of solid silicone rubber: part II: The counter-intuitive influence of dicumylperoxide concentration on crosslink effectiveness and related network structure

    Azevedo, M., Monks, A.-M., Kerschbaumer, R., Schlögl, S., Saalwächter, K., Walluch, M., Consolati, G. & Holzer, C., 15 Aug 2023, In: Journal of applied polymer science. 140.2023, 31, 17 p., e54111.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Determination of the material data for CIM-feedstock FAT-DS (SPT CA)

    Duretek, I., 14 Aug 2023, 13 p.

    Research output: Book/Report › Commissioned report › Research

  25. Published

    Measurement of thermal conductivity and specific volume for four pharmaceutical formulations

    Duretek, I., 28 Jul 2023, 13 p.

    Research output: Book/Report › Commissioned report › Research

  26. Published

    Enhancing High-Pressure Capillary Rheometer Viscosity Data Calculation with the Propagation of Uncertainties for Subsequent Cross-Williams, Landel, and Ferry (WLF) Parameter Fitting

    Hubmann, M., Schuschnigg, S., Duretek, I., Groten, J. & Holzer, C., 24 Jul 2023, In: Polymers. 15.2023, 14, 21 p., 3147.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Personalization of Complex Vaginal Inserts of Ethylene Vinyl Acetate via 3D-Printing

    Eder, S., Kuchler, L., Katschnig, M., Brandl, B., Wolfgang, M., Koutsamanis, I., Hentschel, L., Arbeiter, F., Roblegg, E. & Spoerk, M., 13 Jul 2023, In: Advanced Materials Technologies. 8.2023, 17, 15 p., 2300237.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)

    Momeni, V., Shahroodi, Z., Gonzalez-Gutierrez, J., Hentschel, L., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 11 Jul 2023, In: Polymers. 15.2023, 4, 18 p., 3007.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    The effect of residual polyethylene on mechanical and rheological properties of recycled Polypropylene

    Shahroodi, Z., 25 May 2023, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Wear phenomenon in injection molding

    Zidar, D., Friesenbichler, W. & Blutmager, A., 23 May 2023, In: AIP Conference Proceedings. 2607.2023, 1, 6 p., 040003.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Pack2theLoop – Gemeinsam zum geschlossenen Kreislauf für Polyolefin Verpackungen

    Jahn, E., Fajtak, A., Bichler, L., Schlossnikl, J., Archodoulaki, M. V., Pinter, E., Krempl, N. & Eder, A., 1 May 2023, In: Pack & Log – die Fachzeitschrift für Verpackung & Intralogistik. 2023, 05, p. 12-13 2 p.

    Research output: Contribution to journal › Article › Research

  32. Published

    Current challenges in NdFeB permanent magnets manufacturing by Powder Injection Molding (PIM): A review

    Crozier-Bioud, T., Momeni, V., Gonzalez-Gutierrez, J., Kukla, C., Luca, S. & Rolere, S., May 2023, In: Materials today. Physics. 34.2023, May, 13 p., 101082.

    Research output: Contribution to journal › Review article › peer-review

  33. Published

    Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology

    Liu, D., Hentschel, L., Lin, G., Kukla, C., Schuschnigg, S., Ma, N., Wallis, C., Momeni, V., Kitzmantel, M. & Sui, G., 25 Apr 2023, In: Journal of Materials Engineering and Performance. 32.2023, 20, p. 9174-9181 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Parameter Study on Force Curves of Assembled Electronic Components on Foils during Injection Overmolding Using Simulation

    Hubmann, M., Bakr, M., Groten, J., Pletz, M., Vanfleteren, J., Bossuyt, F., Madadnia, B. & Stadlober, B., 19 Apr 2023, In: Micromachines. 14.2023, 4, 15 p., 876.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Determination of Material Data for one PA66-GF30 (Badamid A70 GF30 HH E) for injection moulding simulation

    Duretek, I., 4 Apr 2023, 19 p.

    Research output: Book/Report › Commissioned report › Research

  36. Published

    Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and Polycarbonate

    Hubmann, M., Groten, J., Pletz, M., Grießer, T., Plevová, K., Nemitz, W. & Stadlober, B., 21 Mar 2023, In: Polymers. 15.2023, 6, 19 p., 1568.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting

    Petersmann, S., Huemer, M., Hentschel, L. & Arbeiter, F., 6 Mar 2023, In: Polymer Testing. 120.2023, March, 10 p., 107977.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    Soft dielectric actuator produced by multi-material fused filament fabrication 3D printing

    Raguž, I., Berer, M., Fleisch, M., Holzer, C., Brancart, J., Vanderborght, B. & Schlögl, S., 6 Mar 2023, (E-pub ahead of print) In: Polymers for Advanced Technologies. 34.2023, 6, p. 1967-1978 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Research Progress on Low-Pressure Powder Injection Molding

    Momeni, V., Hufnagl, M., Shahroodi, Z., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C. & Holzer, C., Jan 2023, In: Materials. 16.2023, 1, 44 p., 379.

    Research output: Contribution to journal › Review article › peer-review

  40. Published

    Advancing Industry 4.0: AI-Enhanced In-Line MIMO Quality Control for Piano-Black Curved Plastic Injection Molded Parts with OPC UA Integration

    Saeidi Aminabadi, S., 2023

    Research output: Thesis › Doctoral Thesis

  41. Published

    Bestimmung des Schwindungsverhaltens von spritzgegossenen, glasfaserverstärkten Kunststoffen

    Zirnig, T., 2023

    Research output: Thesis › Master's Thesis

  42. Published

    Effect of weld lines on in-vitro drug release from additively manufactured pharmaceutical devices of ethylene vinyl acetate (EVA) produced via material extrusion (MEX)

    Gomez Contreras, A., 2023

    Research output: Thesis › Master's Thesis

  43. Published

    Einfluss der Materialvorbehandlung und Prozessparameter auf die Eigenfluoreszenz von spritzgegossenen Cyclo Olefin Polymer Bauteilen

    Habicher, M., 2023

    Research output: Thesis › Master's Thesis

  44. Published

    Einfluss von Fließhilfsmitteln auf Polyamid 12 basierte Pulver für das Pulverbettschmelzen

    Staniszewski, M., 2023

    Research output: Thesis › Master's Thesis

  45. Published

    Environmental performance comparison of a one-step and two-step compounding and injection molding process using recycled PP and glass fibers

    Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, Polymer Meeting 15: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Influence of Epoxy Chain Extender and Multi-Stage Compounding Process on the Properties of Poly-(R)-3-hydroxybutyrate

    Hinterberger, K., 2023

    Research output: Thesis › Master's Thesis

  47. Published

    Nirali and the Wise Bottles

    Main, P., 2023, Plastic Planet: A guide to recycling and caring for our environment. p. 12-17 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

  48. Published

    Process optimization and simulation of film insert molding for electronic applications

    Hubmann, M., 2023

    Research output: Thesis › Doctoral Thesis

  49. Published

    Screening Life Cycle Assessment comparing One-step and Two-step Injection Molding Compounding using Conservative and Optimistic Scenarios

    Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, In: WSEAS transactions on environment and development. 19.2023, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Screening Method Development for Die Drool in Extrusion Blow Moulding for PCR PEHD

    Jochum, P. A., 2023

    Research output: Thesis › Master's Thesis

  51. Published

    Validation Of Alternative Binders for Pellet Extrusion 3D Printing Of 316L Steels

    de la Camacha, A. G., Tabares, E., Jiménez-Morales, A., Schsuchnigg, S., Kukla, C., Cano, S. & Gordo, E., 2023.

    Research output: Contribution to conference › Paper › peer-review

  52. 2022
  53. Published

    Sustainable Tunnelling – An infrastructure operator’s, planner’s, contractor’s and scientist’s perspective.

    Heissenberger, R., Grunicke, U., Raschendofer, J. & Holzer, C., 8 Dec 2022, In: Geomechanics and tunnelling. 15.2022, 6, p. 811-820 9 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

Previous 1 2 3 4 5 6 7 8 ...19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501