Chair of Physical Metallurgy (420)

Organisational unit: Chair

351 - 400 out of 2,174Page size: 50

Research output

  1. 2020
  2. Published

    Novel intermetallic-reinforced near-α Ti alloys manufactured by spark plasma sintering

    Wimler, D., Lindemann, J., Gammer, C., Spörk-Erdely, P., Stark, A., Clemens, H. & Mayer, S., 5 Aug 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 792.2020, 5 August, 11 p., 139798.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Modelling of short-range ordering kinetics in dilute multicomponent substitutional solid solutions

    Svoboda, J., Holec, D., Popov, M., Zickler, G. & Fischer, F.-D., 2 Aug 2020, In: Philosophical magazine. 100.2020, 15, p. 1942-1961 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Mapping the mechanical properties in nitride coatings at the nanometer scale

    Zhang, Z., Chen, Z., Holec, D., Liebscher, C., Koutná, N., Bartosik, M., Zheng, Y. H., Dehm, G. & Mayrhofer, P. H., 1 Aug 2020, In: Acta materialia. 194.2020, 1 August, p. 343-353 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Strain aging characterization and physical modelling of over-aging in dual phase steel

    Soliman, M., Shan, Y. V., Mendez Martin, F., Kozeschnik, E. & Palkowski, H., 24 Jun 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 788.2020, 24 June, 13 p., 139595.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spörk, M., 18 Jun 2020, In: Additive Manufacturing. 35.2020, October, 16 p., 101384.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Fracture properties of thin film TiN at elevated temperatures

    Buchinger, J., Löfler, L., Ast, J., Wagner, A., Chen, Z., Michler, J., Zhang, Z., Mayrhofer, P. H., Holec, D. & Bartosik, M., 13 Jun 2020, In: Materials & design. 194.2020, September, p. 1-10 10 p., 108885.

    Research output: Contribution to journal › Article › Research › peer-review

  8. E-pub ahead of print

    The influence of alloying on Zn liquid metal embrittlement in steels

    Scheiber, D., Prabitz, K. M., Romaner, L. & Ecker, W., 9 Jun 2020, (E-pub ahead of print) In: Acta Materialia. 195.2020, 15 August, p. 750-760 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr(Re)/Al2O3 Metal-Matrix Composite

    Weglewski, W., Pitchai, P., Bochenek, K., Bolzon, G., Konetschnik, R., Sartory, B., Ebner, R., Kiener, D. & Basista, M., May 2020, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, May, p. 2377-2390 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Unravelling local environments in mixed TiO2–SiO2 thin films by XPS and ab initio calculations

    Ondračka, P., Nečas, D., Carette, M., Elisabeth, S., Holec, D., Granier, A., Goullet, A., Zajíčková, L. & Richard-Plouet, M., 30 Apr 2020, In: Applied surface science. 510.2020, 30 April, 11 p., 145056.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Hydrogen assisted intergranular cracking of alloy 725: The effect of boron and copper alloying

    Taji, I., Hajilou, T., Ebner, A., Scheiber, D., Karimi, S., Plesiutschnig, E., Ecker, W., Barnoush, A., Maier-Kiener, V., Johnsen, R. & Razumovskiy, V. I., 25 Apr 2020, In: Corrosion science. 203.2022, 15 July, 14 p., 110331.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Adsorption of H2 on Penta-Octa-Penta Graphene: Grand Canonical Monte Carlo Study

    Popov, M. N., Dengg, T., Gehringer, D. & Holec, D., 1 Apr 2020, In: C – journal of carbon research. 6.2020, 2, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Thermally activated deformation mechanisms and solid solution softening in W-Re alloys investigated via high temperature nanoindentation

    Kappacher, J., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 1 Apr 2020, In: Materials and Design. 189.2020, April, 6 p., 108499.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Interactions between a H2 Molecule and Carbon Nanostructures: A DFT Study

    Gehringer, D., Dengg, T., Popov, M. N. & Holec, D., 20 Mar 2020, In: C – journal of carbon research. 6.2020, 1, 15 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Unexpected softness of bilayer graphene and softening of A-A stacked graphene layers

    Sun, Y., Holec, D., Gehringer, D., Fenwick, O., Dunstan, D. J. & Humphreys, C. J., 20 Mar 2020, In: Physical review : B, Condensed matter and materials physics. 101.2020, 12, 7 p., 125421.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy

    Ebner, A. S., Brinckmann, S., Plesiutschnig, E., Clemens, H., Pippan, R. & Maier-Kiener, V., 16 Mar 2020, In: JOM. 72.2020, 5, p. 2020-2029 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    Insights into surface modification and erosion of multi-element arc cathodes using a novel multilayer cathode design

    Golizadeh Najafabadi, M., Anders, A., Mendez Martin, F., Kolozsvári, S. & Franz, R., 16 Mar 2020, (E-pub ahead of print) In: Journal of applied physics. 127.2020, 11, 10 p., 113301.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Surface Energy of Au Nanoparticles Depending on Their Size and Shape

    Holec, D., Dumitraschkewitz, P., Vollath, D. & Fischer, F.-D., 8 Mar 2020, In: Nanomaterials. 10.2020, 3, p. 1-15 15 p., 484.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    The Effect of Local Arrangement of Excess Mn on Phase Stability in Ni–Mn–Ga Martensite: An Ab Initio Study

    Zelený, M., Heczko, M., Janovec, J., Holec, D., Straka, L. & Heczko, O., 1 Mar 2020, In: Shape Memory and Superelasticity. 6.2020, 1, p. 35-44 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Inconel-Steel Multilayers by Liquid Dispersed Metal Powder Bed Fusion: Microstructure, Residual Stress and Property Gradients

    Bodner, S. C., van de Vorst, L. T. G., Zalesak, J., Todt, J., Keckes, J., Maier-Kiener, V., Sartory, B., Schell, N., Hooijmans, J. W., Saurwalt, J. J. & Keckes, J., Mar 2020, In: Additive Manufacturing. 32.2020, March, 101027.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Erosion and cathodic arc plasma of Nb–Al cathodes: composite versus intermetallic

    Zöhrer, S., Golizadeh Najafabadi, M., Koutná, N., Holec, D., Anders, A. & Franz, R., 20 Feb 2020, In: Plasma sources science & technology. 29.2020, 2, 14 p., 025022.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    The effect of chemical composition on the structure , chemistry and mechanical properties of magnetron sputtered W-B-C coatings : Modeling and experiments

    Mizaei, S., Alishahi, M., Souček, P., Ženíšek, J., Holec, D., Koutná, N., Buršíková, V., Stupavská, M., Zábranský, L., Burmeister, F., Blug, B., Czigány, Z., Balázsi, K., Mikšová, R. & Vašina, P., 15 Feb 2020, In: Surface & coatings technology. 383.2020, 15 February, 12 p., 125274.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Chemical bonding effects on the brittle-to-ductile transition in metallic glasses

    Moitzi, F., Şopu, D., Holec, D., Perera, D., Mousseau, N. & Eckert, J., 10 Feb 2020, In: Acta Materialia. 188.2020, 15 April, p. 273-281 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    Heat Treatments and Critical Quenching Rates in Additively Manufactured Al–Si–Mg Alloys

    Hitzler, L., Hafenstein, S., Mendez Martin, F., Clemens, H., Sert, E., Öchsner, A., Merkel, M. & Werner, E., 5 Feb 2020, (E-pub ahead of print) In: Materials. 13.2020, 3, 17 p., 720.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Microstructural and Phase Analysis of an Additively Manufactured Intermetallic TiAl Alloy using Metallographic Techniques and High-Energy X-Rays

    Jop, M., Wartbichler, R., Staron, P., Maawad, E., Mayer, S. & Clemens, H., 4 Feb 2020, In: Practical metallography = Praktische Metallographie. 57.2020, 2, p. 84-95 12 p.

    Research output: Contribution to journal › Article › Research

  26. Published

    Ab initio calculations of alloying impact on structural properties and stability of cementite

    Sakic, A., 2020

    Research output: Thesis › Master's Thesis

  27. Published

    Chemical changes of TiC particles in a tool steel matrix alloy during hot isostatic pressing

    Pörnbacher, J., 2020

    Research output: Thesis › Doctoral Thesis

  28. Published

    Development and characterization of new low-cost intermetallic titanium aluminide alloys for advanced environmental-friendly propulsion systems

    Jop, M., 2020

    Research output: Thesis › Master's Thesis

  29. Published

    Development of a high entropy alloy for high temperature applications

    Zeisl, S., 2020

    Research output: Thesis › Master's Thesis

  30. 2019
  31. E-pub ahead of print

    An Ab initio study of magnetism in disordered Fe-Al alloys with thermal antiphase boundaries

    Friák, M., Golian, M., Holec, D., Koutná, N. & Šob, M., 23 Dec 2019, (E-pub ahead of print) In: Nanomaterials. 10.2020, 1, 17 p., 44.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Microstructural characterization of molybdenum grain boundaries by micropillar compression testing and atom probe tomography

    Jakob, S., Lorich, A., Eidenberger-Schober, M., Knabl, W., Clemens, H. & Maier-Kiener, V., 5 Dec 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 12, p. 776-786 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Electron beam melting of a β-solidifying intermetallic titanium aluminide alloy

    Wartbichler, R., Clemens, H. & Mayer, S., 1 Dec 2019, In: Advanced engineering materials. 21.2019, 12, 5 p., 1900800.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Impact of V , Hf and Si on oxidation processes in Ti – Al – N : Insights from ab initio molecular dynamics

    Guo, F., Holec, D., Wang, J. & Du, Y., 5 Nov 2019, (E-pub ahead of print) In: Surface & coatings technology. 381.2020, 15 January, 10 p., 125125.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    The creep behavior of a fully lamellar γ-TiAl based alloy

    Burtscher, M., Klein, T., Mayer, S., Clemens, H. & Fischer, F. D., 1 Nov 2019, In: Intermetallics. 114.2019, November, 9 p., 106611.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Assessment of ductile character in superhard Ta-C-N thin films

    Glechner, T., Hahn, R., Wojcik, T., Holec, D., Kolozsvari, S., Zaid, H., Kodambaka, S., Mayrhofer, P. H. & Riedl, H., 15 Oct 2019, In: Acta materialia. 179.2019, 15 October, p. 17-25 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb

    Völker, B., Maier-Kiener, V., Werbach, K., Müller, T., Pilz, S., Calin, M., Eckert, J. & Hohenwarter, A., 5 Oct 2019, In: Materials and Design. 179.2019, 5 October, 11 p., 107864.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Low temperature deformation of MoSi2 and the effect of Ta, Nb and Al as alloying elements

    Zenk, C., Gibson, J. S. K. L., Maier-Kiener, V., Neumeier, S., Göken, M. & Korte-Kerzel, S., 2 Oct 2019, In: Acta materialia. 181.2019, December, p. 385-398 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Accepted/In press

    Solid bitumen in shale reservoirs: a challenge in organic petrography and geochemistry

    Misch, D., Riedl, F., Vranjes-Wessely, S., Horsfield, B., Reischenbacher, D., Ziegs, V., Mendez Martin, F. & Sachsenhofer, R., Oct 2019, (Accepted/In press) New Directions in Geosciences for Unconventional Resources.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Metallography of Intermetallic Titanium Aluminides – the ( Additive ) Manufacturing Makes the Difference

    Mayer, S., Schimbäck, D., Wartbichler, R., Wimler, D. & Clemens, H., 27 Aug 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 9, p. 567-584 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites

    Maity, T., Prashanth, K. G., Janda, A., Kim, J. T., Spieckermann, F. & Eckert, J., 1 Aug 2019, In: Journal of Materials Research. 34.2019, 15, p. 2672-2682 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Influence of crystal orientation and Berkovich tip rotation on the mechanical characterization of grain boundaries in molybdenum

    Jakob, S., Leitner, A., Lorich, A., Eidenberger-Schober, M., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Jul 2019, In: Materials & design. 182.2019, 15 November, p. 1-9 9 p., 107998.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Petrographic and sorption-based characterization of bituminous organic matter in the Mandal Formation, Central Graben (Norway)

    Misch, D., Riedl, F., Liu, B., Horsfield, B., Ziegs, V., Mendez Martin, F., Vranjes-Wessely, S. & Sachsenhofer, R., 18 Jun 2019, In: International journal of coal geology. 211.2019, 1 July, 12 p., 103229.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Deformation behavior of aluminum pillars produced by Xe and Ga focused ion beams: Insights from strain rate jump tests

    Xiao, Y., Maier-Kiener, V., Michler, J., Spolenak, R. & Wheeler, J. M., 7 Jun 2019, In: Materials and Design. 181.2019, November, 11 p., 107914 .

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Elasticity of phases in Fe-Al-Ti superalloys: impact of atomic order and anti-phase boundaries

    Friák, M., Bursikova, V., Pizurová, N., Pavlu, J., Jiraskova, Y., Homola, V., Miháliková, I., Slávik, A., Holec, D., Všianská, M., Koutna, N., Fikar, J., D., J., Šob, M. & Neugebauer, J., 1 Jun 2019.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Microstructural Evolution and Mechanical Properties of an Advanced γ-TiAl Based Alloy Processed by Spark Plasma Sintering

    Wimler, D., Lindemann, J., Clemens, H. & Mayer, S., 9 May 2019, In: Materials. 12.2019, 9, 12 p., 1523.

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    An ab initio study of vacancies in disordered magnetic systems: A Case Study of Fe-Rich Fe-Al Phases

    Miháliková, I., Friák, M., Koutná, N., Holec, D. & Šob, M., 2 May 2019, (E-pub ahead of print) In: Materials. 12.2019, 9, 16 p., 1430.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Correlating structural and mechanical properties of AlN / TiN superlattice films

    Koutná, N., Rehák, P., Chen, Z., Bartosik, M., Fallmann, M., Cerny, M., Zhang, Z., Friák, M., Šob, M., Mayrhofer, P. H. & Holec, D., 1 May 2019, In: Scripta materialia. 165.2019, May, p. 159-163 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Thermal Expansion and Other Thermodynamic Properties of α2-Ti3Al and γ-TiAl Intermetallic Phases from First Principles Methods

    Holec, D., Abdoshahi, N., Mayer, S. & Clemens, H., 19 Apr 2019, In: Materials. 12.2019, 8, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 4 Apr 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 220-224 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Experimental Chemistry and Structural Stability of AlNb3 Enabled by Antisite Defects Formation

    Koutná, N., Erdely, P., Zöhrer, S., Franz, R., Du, Y., Liu, S., Mayrhofer, P. H. & Holec, D., 3 Apr 2019, In: Materials. 12.2019, 7, p. 1-11 11 p., 1104.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite

    Eggbauer, A., Lukas, M., Ressel, G., Prevedel, P., Mendez Martin, F., Keckes, J., Stark, A. & Ebner, R., 22 Mar 2019, In: Journal of materials science. 54.2019, 12, p. 9197-9212 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...4 5 6 7 8 9 10 11 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben