Chair of Physical Metallurgy (420)

Organisational unit: Chair

1901 - 1950 out of 2,174Page size: 50

Research output

  1. 2006
  2. Published

    Precipitation behaviour of Ni and Al alloyed hot-work tool steels and its effects on material properties

    Erlach, S. D., 2006

    Research output: Thesis › Doctoral Thesis

  3. Published

    Properties of reactively sputtered W-Si-N films

    Musil, J., Daniel, R., Soldán, J. & Zeman, P., 2006, In: Surface & coatings technology.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Provide temperature and temperature range data where distinct reactions in the investigated coatings occur, and amount of volatile elements if they appear

    Mayrhofer, P. H., Moser, M. & Rovere, F., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Recrystallisation and Phase Transitions in a g-TiAl Based Alloy as Observed by ex- and in-situ High-energy X-ray Diffraction

    Liss, K.-D., Bartels, A., Clemens, H., Bystrzanowski, S., Stark, A., Buslaps, T., Schimansky, F.-P., Gerling, R., Scheu, C. & Schreyer, A., 2006, In: Acta materialia. 54, p. 3721-3735

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Röntgengrobstrukturuntersuchungen an Schweissungen - Bericht 1

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Röntgengrobstrukturuntersuchungen an Schweissungen - Bericht 2

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Röntgengrobstrukturuntersuchungen an Schweissungen - Bericht 3

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Röntgengrobstrukturuntersuchungen an Schweissungen - Bericht 4

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Röntgengrobstrukturuntersuchungen an Schweissungen - Bericht 5

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Röntgengrobstrukturuntersuchungen an Schweissungen - Bericht 6

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Röntgengrobstrukturuntersuchungen an Schweissungen - Bericht 7

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Röntgengrobstrukturuntersuchungen an Schweissungen - Bericht 8

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    RPC NANOCOAT, 12 months report

    Ebner, R. & Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    RPC NANOCOAT, 18 months report

    Ebner, R. & Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Rückstandsanalysen von Rohren

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Schadenanalyse an Weichensystemteilen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Schadenanalyse an Winkelträger

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Schadensanalyse an einem geborstenen Hydraulikventil

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Schadensanalyse an einem Tunnelofen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Schadensanalyse an einer geborstenen Kesselanlage

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Schadensanalyse an einer Seilbahnrolle

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Schadensanalyse an gebrochenen Zahlhaltern

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Schadensanalyse an Lamellenkupplungen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Schadensanalyse an Rohrverschraubungen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Schadensanalyse an Wärmetauscherrohren

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Schadensuntersuchungen an einer Refineranlage

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Schwingfestigkeitsuntersuchungen an Laserschweissungen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Schwingfestigkeitsuntersuchungen an Rohrverbindungen - Bericht 1

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Schwingfestigkeitsuntersuchungen an Rohrverbindungen - Bericht 2

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Short-time heat treatment of high-speed steels

    Leitner, H., Caliskanoglu, D., Vrtacnik, K. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 119-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Smarte Werkstoffe denken mit - Material, das sich selbst veredelt!

    Mitterer, C., 2006, In: Der Standard : Österreichs unabhängige Tageszeitung für Wirtschaft, Politik und Kultur. p. 17-18

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Spin Configurations in Strained Magnetic EuSe/PbSe1-xTex Superlattices Grown by Molecular Beam Epitaxy

    Lechner, R. T., Springholz, G., Schülli, T. U., Stangl, J., Schwarzl, T., Lott, D., Leiner, V., Schreyer, A., Clemens, H. & Bauer, G., 2006, In: Physica E: Low-dimensional systems & nanostructures. 32, p. 379-382

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Steigerung der Haftfestigkeit von bei Raumtemperatur gesputterten TiN Schichten

    Heinz, W., 2006

    Research output: Thesis › Diploma Thesis

  35. Published

    Structural investigation of aluminium-chromium-nitride hard coatings by Raman micro-spectroscopy

    Kaindl, R., Franz, R., Soldan, J., Reiter, R., Polcik, P., Mitterer, C., Sartory, B., Tessadri, R. & Sullivan, M. O., 2006, In: Thin solid films. 515, p. 2197-2202

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Structure and Properties of Pulsed-Laser Deposited Carbon Nitride Thin Films

    Riascos, H., Neidhardt, J., Radnoczi, G. Z., Emmerlich, J., Zambrano, G., Hultman, L. & Prieto, P., 2006, In: Thin solid films. 497, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Structure and properties of Ti-N-B coatings deposited by thermal CVD

    Hochauer, D., 2006

    Research output: Thesis › Diploma Thesis

  38. Published

    Structure Evolution of Cr-Al-N Hard Coatings

    Mayrhofer, P. H., Willmann, H. & Reiter, A. E., 2006, 49th Annual Technical Conference Proceedings. SVC, p. 575-579

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Structure Models of Massively Transformed High Niobium Containing TiAl

    Scheu, C., Cha, L., Sturm, S., Chladil, H., Mayrhofer, P. H., Clemens, H., Bartels, A., Wolf, W. & Podloucky, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Structure of sputtered nanocomposite CrCx/a-C:H thin films

    Gassner, G., Patscheider, J., Mayrhofer, P. H., Hegedus, E., Toth, L., Kovacs, I., Pecz, B., Srot, V., Scheu, C. & Mitterer, C., 2006, In: Journal of vacuum science & technology / B (JVST). 24, p. 1837-1843

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Supersaturated phase formation and age hardening of hard coatings

    Mayrhofer, P. H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Synthesis and Characterisation of AlCrMoN Coatings

    Holly, S., 2006

    Research output: Thesis › Diploma Thesis

  43. Published

    Texture evolution of the gamma- and the a/a2-phase during hot rolling of gamma-TiAl based alloys

    Schillinger, W., Bartels, A., Gerling, R., Schimansky, F.-P. & Clemens, H., 2006, In: Intermetallics. 14, p. 336-347

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    The deposition of metastable (Ti,Al)N coatings by thermal CVD

    Edlmayr, V., 2006, 65 p.

    Research output: Thesis › Diploma Thesis

  45. Published

    The High-temperature Background in Intermetallic Alloys

    Weller, M., Clemens, H. & Haneczok, G., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 442, p. 138-141

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    The influence of boron content on the tribological performance of Ti-N-B coatings prepared by thermal CVD

    Wagner, J., Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Wallgram, W. & Kathrein, M., 2006, In: Surface & coatings technology. 201, p. 4247-4252

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Thermal decomposition of CrN hard coatings

    Ernst, W., 2006, 81 p.

    Research output: Thesis › Diploma Thesis

  48. Published

    Thermal fatigue behaviour of hot work tool steels - heat check nucleation and growth

    Ebner, R., Marsoner, S., Siller, I. & Ecker, W., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 161-173

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Thermally Induced Self-hardening of Nanocrystalline Ti-B-N Thin Films

    Mayrhofer, P. H., Mitterer, C., Wen, J. G., Petrov, I. & Greene, J. E., 2006, In: Journal of applied physics. 100, p. 044301-1-044301-7

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Thermal stability of advanced nanostructured wear-resistant coatings

    Hultman, L. & Mitterer, C., 2006, Nanostructured Coatings. p. 464-510

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  51. Published

    Thermal stability of Al-Cr-N hard coatings

    Willmann, H., Mayrhofer, P. H., Persson, P. O. A., Reiter, A. E., Hultman, L. & Mitterer, C., 2006, In: Scripta materialia. 54, p. 1847-1851

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...35 36 37 38 39 40 41 42 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben