Chair of Physical Metallurgy (420)

Organisational unit: Chair

1851 - 1900 out of 2,174Page size: 50

Research output

  1. 2006
  2. Published

    Influence of Pulsed Substrate Bias on the Structure and Properties of CrN Coatings Deposited by Reactive DC Magnetron Sputtering

    Grasser, S., Gassner, G., Walter, C., Daniel, R. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Influence of the Al distribution on the structure, elastic properties, and phase stability of supersaturated Ti1-xAlxN

    Mayrhofer, P. H., Music, D. & Schneider, J. M., 2006, In: Journal of applied physics. 100, p. 094906-1-94906-5

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Innovative Beschichtungen im Werkzeugbau

    Mitterer, C., 2006, In: Stahl : Zeitschrift für den High-Tech-Werkstoff . 2, p. 15-16

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Interface structure and strain development during compression tests of Al2O3/Nb/Al2O3 sandwiches

    Scheu, C., Liu, Y., Oh, S. H., Brunner, D. & Rühle, M., 2006, In: Journal of materials science. 41, p. 7798-7807

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Intermetallics for Higher, Moderate and Low Temperature Applications (HIMOLO) - Experimental characterisation: preliminary results (f) Grain-size determination and grain orientation measurements using EBSD in a SEM

    Scheu, C., Chladil, H., Clemens, H. & Ebner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Intermetallics for Higher, Moderate and Low Temperature Applications (HIMOLO) - Specification of the heat treatment process to abtain massively transformed microstructures and first test

    Scheu, C., Chladil, H., Clemens, H. & Ebner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Intermetallische Titanaluminide: Werkstoffe für hohe Temperaturen

    Appel, F. & Clemens, H., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 195-199

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Isothermal Aging Kinetics of NiAl Precipitates in a Secondary Hardening Steel

    Erlach, S. D., Siller, I., Leitner, H. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 725-732

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Konventionelles Schmieden von Titanaluminiden

    Klauber, W., 2006, 85 p.

    Research output: Thesis › Diploma Thesis

  11. Published

    Korrosionsverhalten von Kesselblechen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Kurzzeitkriechverhalten von Warmarbeitsstählen

    Wurmbauer, H. & Scheu, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Kurzzeitkriechverhalten von Warmarbeitsstählen

    Stergar, E., 2006, 77 p.

    Research output: Thesis › Diploma Thesis

  14. Published

    Lasertechnisch hergestellter Werkstoffverbund für Schneidenwerkzeuge auf Stahlbasis

    Stotter, C., 2006, 153 p.

    Research output: Thesis › Doctoral Thesis

  15. Published

    Low friction mechanisms active for TiCN

    Rebelo De Figueiredo, M., Neidhardt, J., Kaindl, R., Tessadri, R. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Low friction mechanisms active for TiCN hard coatings

    Rebelo De Figueiredo, M., Neidhardt, J., Kaindl, R., Tessadri, R. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Magnéli phase formation of PVD Mo-N and W-N coatings

    Gassner, G., Mayrhofer, P. H., Kutschej, K., Mitterer, C. & Kathrein, M., 2006, In: Surface & coatings technology. 201, p. 3335-3341

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Magnetron Sputtered Intermetallic Al2Au and Al-Zr-Y Coatings for the Oxidation Protection of g-TiAl

    Moser, M., Mayrhofer, P. H. & Braun, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Materials Research at the Materials Center Leoben

    Ebner, R., 2006, In: Advanced engineering materials. 8, p. 1171-1177

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Metallographische Ferritbestimmung an hochlegierten Schweissungen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Metallographische Präparation von dotiertem Tantal für licht- und rasterelektronenmikroskopische Mikrostrukturuntersuchungen

    Mayer, S., Pölzl, S., Hawranek, G., Bischof, M., Scheu, C., Clemens, H. & Knabl, W., 2006, In: Practical metallography = Praktische Metallographie. 43, p. 614-628

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Metallographische Präparation von Wolfram und Wolframlegierungen zur Gefügeuntersuchung mittels licht- und rasterelektronenmikroskopischer Methoden

    Jedlicka, C., Pölzl, S., Hawranek, G., Leitner, H., Clemens, H., Stickler, R., Hoffmann, A. & Knabl, W., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 371-378

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Micro- and bonding structure of AlCrVN low-friction coatings

    Franz, R., Neidhardt, J., Sartory, B., Tessadri, R., Derflinger, V., Polcik, P. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Microstructural aspects determining the adhesive wear of tool steels

    Fontalvo, G., Humer, R., Mitterer, C., Sammt, K. & Schemmel, I., 2006, In: Wear. 260, p. 1028-1034

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Microstructural characterization of modern Boron containing 9-11%Cr steels developed in the framework of the COST program

    Kauffmann, F., Mayer, K.-H., Straub, S., Zies, G., Scheu, C., Willer, D., Ruoff, H. & Maile, K., 2006, Proceeding of the 8th Liége Conference. p. 1171-1180

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Microstructural design of hard coatings

    Mayrhofer, P. H., Mitterer, C., Hultman, L. & Clemens, H., 2006, In: Progress in materials science. 51, p. 1032-1114

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Microstructural evolution of Cr-Mn-N Austenitic Steels during Cold Work Hardening

    Saller, G., Spiradek-Hahn, K., Scheu, C. & Clemens, H., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 427, p. 246-254

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Microstructure and Texture Formation during Hot Rolling of Nb-Rich Gamma TiAl Alloys with Different C Contents

    Stark, A., Bartels, A., Gerling, R., Schimansky, F.-P. & Clemens, H., 2006, In: Advanced engineering materials. p. 1101-1108

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Microstructure and Thermal Properties of Al-Au Coatings

    Moser, M., Mayrhofer, P. H., Ross, I. & Rainforth, W. M., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Mikrostrukturelle Merkmale von martensitischen Chromstählen und deren Einfluss auf die Kriechfestigkeit

    Maile, K., Zies, G., Scheck, R., Kuppler, D., Ruoff, H., Rauch, M., Klenk, A. & Scheu, C., 2006, In: Practical metallography = Praktische Metallographie. 43, p. 349-363

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Mikrostrukturelle Untersuchungen an Böhler N710

    Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Mikrostruktur und mechanische Eigenschaften eines C/C-Cu Verbundes für Fusionsreaktoren

    Eidenberger, E., 2006

    Research output: Thesis › Diploma Thesis

  33. Published

    Multifunctional PVD Coatings for Cutting tools

    Pfeiler, M. & Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Multifunctional Thermal CVD (M) (S) (N) coatings for cutting

    Wagner, J. & Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Nanocomposite Ti-B-N coatings synthesized by reactive arc evaporation

    Neidhardt, J., Czigany, Z., Sartory, B., Tessadri, R., Sullivan, M. O. & Mitterer, C., 2006, In: Acta materialia. 54, p. 4193-4200

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Nanoindentation Response of High Performance Fullerene-Like CNx

    Neidhardt, J., Palacio, J. F., Bull, S. J. & Hultman, L., 2006, In: Thin solid films. 494, p. 63-68

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    NANOSURFACEENGINEERING CENTER - Infrastrukturanschaffung

    Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    NANOSURFACEENGINEERING CENTER - Planungsarbeiten für den Aufbau und die Laborausstattung

    Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Neutronenkleinwinkelstreuung an ausscheidungsgehärteten Stählen

    Eidenberger, E., Bischof, M., Staron, P., Erlach, S. D., Leitner, H., Scheu, C. & Clemens, H., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    New high-performence CVD oxide based coatings

    Hochauer, D. & Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Niedrigreibungsschichten für Hochleistungskomponenten in der Antriebs- und Motorentechnik

    Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Oberflächenanalysen an hochfesten Feinblechen - Bericht 1

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Oberflächenanalysen an hochfesten Feinblechen - Bericht 2

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Oberflächenanalysen an hochfesten Feinblechen - Bericht 3

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Oberflächenanalysen an hochfesten Feinblechen - Bericht 4

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    On the Development of Grain Growth Resistant Tantalum Alloys

    Bischof, M., Mayer, S., Leitner, H., Clemens, H., Staron, P., Geiger, E., Voiticek, A. & Knabl, W., 2006, In: International journal of refractory metals & hard materials. 24, p. 437-444

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    On the texture of spray formed gamma titanium aluminide

    Staron, P., Bartels, A., Brokmeier, H.-G., Gerling, R., Schimansky, F.-P. & Clemens, H., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 416, p. 11-17

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Phasenreaktionen in hochcarbidhaltigen Nickelbasislegierungen

    Jönzen, M., Ebner, R., Leitner, H. & Caliskanoglu, D., 2006, In: HTM - journal of heat treatment and materials . 61, p. 121-127

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Phase Transformations in High Niobium and Carbon Containing g-TiAl Based Alloys

    Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R., Schimansky, F. P. & Kremmer, S., 2006, In: Intermetallics. 14, p. 1194-1198

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Phase Transitions and Recrystallization in a Ti-46at%Al-9at%Nb Alloy as Observed by In-situ High-Energy X-ray Diffraction

    Liss, K.-D., Clemens, H., Bartels, A., Stark, A. & Buslaps, T., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Physisorbed films in periodic mesoporous silica studied by in-situ synchrotron small-angle diffraction

    Zickler, G., Jähnert, S., Wagermaier, W., Funari, S. S., Findenegg, G. H. & Paris, O., 2006, In: Physical review : B, Condensed matter and materials physics. 73, p. 184109-184109

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...34 35 36 37 38 39 40 41 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben