Chair of Physical Metallurgy (420)

Organisational unit: Chair

1751 - 1800 out of 2,174Page size: 50

Research output

  1. 2006
  2. Published

    Annealing studies of nanocomposite Ti-Si-C thin films with respect to phase stability and tribological performance

    Rester, M., Neidhardt, J., Eklund, P., Emmerlich, J., Ljungcrantz, H., Hultman, L. & Mitterer, C., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 90-95

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    A reconsideration of the relationship between the crystallite size La of carbons determined by X-ray diffraction and Raman spectroscopy

    Zickler, G., Smarsly, B., Gierlinger, N., Peterlik, H. & Paris, O., 2006, In: Carbon. 44, p. 3239-3245

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Atomistische Vorgänge in metastabilen Hartstoffschichten - Atomic procedures in metastable hard coatings

    Mayrhofer, P. H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Atom-Probe Tomography Investigation of the Precipitation Behavior in a Nickel and Aluminium

    Akre, J., Danoix, F., Erlach, S. D., Leitner, H. & Auger, P., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 651-659

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Availability of activation energy of reactions in selected optimized coatings

    Mayrhofer, P. H., Moser, M. & Rovere, F., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Availability of suitable data on thermal stability to further optimize coatings - Part II

    Mayrhofer, P. H., Moser, M. & Rovere, F., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Availability of suitable data on thermal staility to further optimise coatings

    Mayrhofer, P. H., Moser, M. & Rovere, F., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Bauteiluntersuchungen von Kleingeräten

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Bauteilversuche an lasergeschweissten Blechen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Begutachten von Bauteilen und Schweissverbindungen von Solaranlagen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Begutachtung von Stahlprofilen an Hochspannungsmasten, Gittermasten

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Bericht über die Kooperationsanbahnung

    Fontalvo, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Bericht über die Kooperationsanbahnung

    Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Bericht über die Kooperationsanbahnung mit der Firma SVS Vacuum Coating Technologies GmbH & Co. KG

    Mayrhofer, P. H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Bestimmung der Übergangstemperatur und fraktographische Untersuchungen an Werkzeugstählen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Bestimmung mechanischer Kennwerte hochfester Drähte

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Bestimmung mechanischer Kennwerte hochfester Stahlbänder

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Beurteilung der Wasserstoffversprödung an feuerverzinkten Teilen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Beurteilung von Fangteilen an Liftanlagen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Beurteilung von Geländerteilen für Aussenbereiche

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Beurteilung von Magnetitschichtdicken

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Bewertung einer selbstreduzierenden Oberflächenschicht für Tantal - Drähte

    Egger, R., 2006

    Research output: Thesis › Diploma Thesis

  24. Published

    Biocompatibile TiN-based novel nanocrystalline films

    Ebner, R., Lackner, J. M., Waldhauser, W., Major, R., Czarnowska, E., Kustosz, R., Lacki, P. & Major, B., 2006, In: Bulletin of the Polish Academy of Sciences / Technical sciences. 54, p. 167-173

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Bruchmechanische Untersuchungen an Laserschweissungen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    CD-Labor für Advanced Hard Coatings - 2 Jahres-_Evaluierungsbericht

    Mitterer, C. & Tessadri, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    CD-Labor für Advanced Hard Coatings - Endbericht 2005

    Mitterer, C. & Tessadri, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    CD-Labor für Advanced Hard Coatings - Zwischenbericht

    Mitterer, C. & Tessadri, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Characterisation of Residual Stresses in Compressor Discs for Aeroengines

    Cihak, U., Staron, P., Stockinger, M. & Clemens, H., 2006, In: Advanced engineering materials. 8, p. 1088-1092

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Characterisation of Residual Stresses in Turbine Discs by Neutron and High-Energy X-Ray Diffraction and Comparisation to Finite Element Modeling

    Cihak, U., Staron, P., Clemens, H., Homeyer, J., Stockinger, M. & Tockner, J., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 437, p. 75-82

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Characterization of Nanometer-sized Precipitates in Tool Steels

    Leitner, H. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 695-706

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Characterization of second-phase particles in metallic high-performance materials

    Bischof, M. A., 2006, 135 p.

    Research output: Thesis › Doctoral Thesis

  33. Published

    Characterization of the Behavior under Impact Loading of a Maraging Steel Strengthened by nano-Precipitates

    Lach, E., Redjaimia, A., Leitner, H. & Clemens, H., 2006, Proceeding of the 8th International Conference on Mechanical and Physical Behaviour of Materials under Nynamic Loading. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Characterization of the Precipitates in Modern Boron Containing 9-12 % Cr Steels by EFTEM and their Correlation to the Creep Strength

    Kauffmann, F., Mayer, K.-H., Straub, S., Zies, G., Scheu, C., Ruoff, H. & Maile, K., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 273-280

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-alloyed Stainless Steel

    Peißl, S. K., Leitner, H., Ebner, R., Hutter, H., Krecar, D. & Rabitsch, R., 2006, In: Journal of ASTM international. 3, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Charakterisierung der auftretenden Phasen an C/C-Cu Verbindungen - Endbericht

    Scheu, C., Eidenberger, E., Leitner, H. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Charakterisierung des Ausscheidungsverhaltens von hoch stickstofflegierten austenitischen Stählen

    Zuber, M. J., 2006

    Research output: Thesis › Diploma Thesis

  38. Published

    Charakterisierung einer b–erstarrenden g-TiAl-Legierung

    Chladil, H., Clemens, H., Güther, V. & Kremmer, S., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 51-58

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Charakterisierung einer Beta-erstarrenden γ-TiAl Basislegierung

    Chladil, H. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Charakterisierung einer hoch niobhaltigen intermetallischen Titanaluminid-Legierung

    Schnitzer, R., 2006, 93 p.

    Research output: Thesis › Diploma Thesis

  41. Published

    Charakterisierung einer β-erstarrenden γ-TiAl-Basislegierung

    Chladil, H., Clemens, H., Otto, A., Güther, V., Kremmer, S., Bartels, A. & Gerling, R., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 356-361

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Charakterisierung und fraktographische Beurteilung von Zahlhaltern

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Charakterisierung und Simulation der Ausscheidungsvorgänge in neuartigen Werkzeugstählen

    Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Charakterisierung von Abriebsrückständen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Charakterisierung von Aluminium-Ronden

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Charakterisierung von Auftragsschweissungen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Charakterisierung von galvanischen und feuerverzinkten Drähten

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Charakterisierung von hochniobhältigen Gamma-Titanaluminid Basis-Legierungen

    Chladil, H. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Charakterisierung von Lagerrollen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Charakterisierung von Laserpunktschweissungen an Solaranlagen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Charakterisierung von Rückständen in einer Wasserturbine

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...32 33 34 35 36 37 38 39 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben