Chair of Physical Metallurgy (420)

Organisational unit: Chair

2101 - 2174 out of 2,174Page size: 100

Research output

  1. 2005
  2. Published

    Sputtered Coatings Based on the Al2Au Phase

    Mitterer, C., Lenhart, H., Mayrhofer, P. & Kathrein, M., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S5.38.1-S5.38.6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Structure and properties of CVD TiCxN1-x coatings

    Wagner, J., Mitterer, C., Penoy, M., Michotte, C., Wallgram, W. & Kathrein, M., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 917-931

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Structure and Properties of CVD TiCxN1-x Coatings

    Wagner, J., Mitterer, C., Penoy, M., Michotte, C., Wallgram, W. & Kathrein, M., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Structure and properties of magnetron sputtered Zr-Si-N films with a high (≥25 at.%) Si content

    Musil, J., Daniel, R., Zeman, P. & Takai, O., 2005, In: Thin solid films.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Structure, mechanical and tribological properties for sputtered Ti1-xAlxN coatings with 0.5

    Kutschej, K., Mayrhofer, P. H., Kathrein, M., Polcik, P., Tessadri, R. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 2358-2365

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Surface Modification of Titanium Alloys by Phospholipid Membrane Systems

    Pressl, D., Hlawacek, G., Teichert, C., Feyerabend, F., Willumeit, R. & Clemens, H., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Tensile Tests on Nickel-Based Alloys

    Cihak, U., Staron, P. & Homeyer, J., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Texture characterisation of extruded TiAl

    Chladil, H., Klauber, W. & Schnitzer, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    The effect of a pulsed plasma based substrate electron bombardment on the properties of sputtered CrC/a-C:H coatings

    Lechthaler, M., 2005

    Research output: Thesis › Diploma Thesis

  11. Published

    The effect of oxide-forming alloying elements on the high temperature wear of a hot work steel

    Fontalvo, G. & Mitterer, C., 2005, In: Wear. 258, p. 1491-1499

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    The precipition sequences of a novel steel during varied heat treatments

    Bischof, M. A. & Clemens, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Thermal Stability of Al1-xCrxN Hard Coatings

    Willmann, H., Persson, P. O. A., Reiter, A. E., Mayrhofer, P. H., Hultman, L. & Mitterer, C., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Thermal Stability of Nanostructured TiN-TiB2 Thin Films

    Mayrhofer, P. H. & Mitterer, C., 2005, 2004 MRS Fall Meeting: Symposium U – Stability of Thin Films and Nanostructures . Materials Research Society : MRS, p. 95-100 (MRS Online Proceedings Library; vol. 854).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Thermal Stability of Nanostructured TiN-TiB2 Thin Films

    Mayrhofer, P. & Mitterer, C., 2005, p. U6.2.1-U6.2.6.

    Research output: Contribution to conference › Presentation › Research › peer-review

  16. Published

    Thermische Analyse von Stranggießpulvern

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Untersuchungsbericht zum Ausdehnungsverhalten von Schäumen

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Versuchslegierungen - MCL Projekt T11

    Peißl, S. K. & Clemens, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Wärmebehandlungsversuche an Stabelektroden von Entstaubungsanlagen

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Wear and friction behavior of the aerospace bearing steel M50 and a nitrogen-alloyed stainless steel under lubricated sliding conditions

    Peißl, S. K., Leitner, H., Ebner, R., Wilhelm, P., Chernev, B. & Rabitsch, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Wear resistant, low friction hard coatings for cutting applications

    Chladil, K., 2005

    Research output: Thesis › Doctoral Thesis

  22. Published

    Werkstoffberatung (Medizintechnik)

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Werkstoffcharakteriserung von Hartmetallteilen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Werkstoffcharakterisierung an Einspritzsystemen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Werkstoffcharakterisierung und Beurteilung von Stäuben

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Werkstoffcharakterisierung von Drähten für Nägel

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Werkstoffcharakterisierung von Gittermasten (Sprödbruchverhalten)

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Werkstoffcharakterisierung von Kettenlaschen - Bericht 1

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Werkstoffcharakterisierung von Kettenlaschen - Bericht 2

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Werkstoffcharakterisierung von KFZ-Teilen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Werkstoffcharakterisierung von Kranbauteilen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Werkstoffcharakterisierung von Lagerteilen - Bericht 1

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Werkstoffcharakterisierung von Lagerteilen - Bericht 2

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Werkstoffcharakterisierung von Laserschweissungen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Werkstoffcharakterisierung von Schmiedeteilen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Werkstoffcharakterisierung von verschleissfesten Plattierungen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Werkstoffcharakterisierung von verzinktem Rundmaterial

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Werkstoffe im Spiegel der BHM

    Jeglitsch, F., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. 150 Jg., p. 39-44

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Werkstoffuntersuchungen zum Warmwalzen von Wolfram und Wolframlegierungen

    Jedlicka, C., 2005, 168 p.

    Research output: Thesis › Diploma Thesis

  40. Published

    Wöhleruntersuchungen an Rohrverbindungen - Bericht 1

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Wöhleruntersuchungen an Rohrverbindungen - Bericht 2

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Wöhleruntersuchungen an Schwerstangenwerkstoffen (Qualitätsprüfung) - Bericht 1

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Wöhleruntersuchungen an Schwerstangenwerkstoffen (Qualitätsprüfung) - Bericht 2

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Wöhleruntersuchungen an Schwerstangenwerkstoffen (Qualitätsprüfung) - Bericht 3

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Wöhleruntersuchungen an Schwerstangenwerkstoffen (Qualitätsprüfung) - Bericht 4

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Wöhleruntersuchungen an Schwerstangenwerkstoffen (Qualitätsprüfung) - Bericht 5

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Wöhleruntersuchungen an Schwerstangenwerkstoffen (Qualitätsprüfung) - Bericht 6

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Wöhleruntersuchungen an Schwerstangenwerkstoffen (Qualitätsprüfung) - Bericht 7

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Wöhleruntersuchungen an Schwerstangenwerkstoffen (Qualitätsprüfung) - Bericht 8

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Wöhleruntersuchungen an Schwerstangenwerkstoffen (Qualitätsprüfung) - Bericht 9

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Wöhleruntersuchungen an Sinterteilen für die KFZ-Industrie

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Wöhleruntersuchungen an Zahnrädern

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Wöhleruntersuchungen und bruchmechanische Charakterisierung von Laserschweissungen - Bericht 1

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  54. Published

    Wöhleruntersuchungen und bruchmechanische Charakterisierung von Laserschweissungen - Bericht 2

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  55. Published

    Workshop "Neue Trends in der Entwicklung und Anwendung von intermetallischen Titanaluminiden" - Bericht 2

    Clemens, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  56. Published

    Zugprüfung an höchstfesten Werkstoffen

    Panzenböck, M., Marsoner, S., Deinhofer, G., Lackner, J. & Ebner, R., 2005, Konferenz nicht gefunden. p. 473-478

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Zugprüfung an höchstfesten Werkstoffen

    Panzenböck, M., Marsoner, S., Deinhofer, G., Lackner, J. & Ebner, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Zur Entwicklung von kornwachstumsstabilisierten Tantaldrähten

    Mayer, S., Bischof, M. A., Leitner, H., Clemens, H., Voiticek, A. & Knabl, W., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. 150, p. 246-250

    Research output: Contribution to journal › Article › Research › peer-review

  59. 2004
  60. Published

    Design of nanostructured hard coatings for optimum performance

    Mitterer, C. & Mayrhofer, P. H., 2004, Euro Ceramics VIII. p. 453-458

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Gefügeentwicklung bei der thermischen Nachbehandlung rasch erstarrter Schnellarbeitsstähle

    Stotter, C., Leitner, H., Ebner, R., Ramminger, P. & Brandstätter, E., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 244-248

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    On the Precipitation Behavior of a Ni and Alloyed Martensitic Tool Steel

    Erlach, S., Danoix, F., Lemarchand, D., Leitner, H., Bischof, M. A., Siller, I. & Clemens, H., 2004, MS&T 2004 Conference Proceedings . p. 633-641

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Thermal stability and self-arrangement of nanocrystalline hard coatings

    Mayrhofer, P. H., 2004, Nanostructured Thin Films and Nanodispersion Strengthened Coatings. p. 57-68

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  64. 2003
  65. Published

    Local microstructure and its influence on precipitation behavior in hot deformed Nimonic 80a

    Tian, B., Zickler, G., Lind, C. & Paris, O., 2003, In: Acta materialia. 51, p. 4149-4160

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Physikalische Simulation der mehrstufigen Primärumformung von Alloy 80a

    Wasle, G., Sommitsch, C., Kleber, S., Buchmayr, B. & Clemens, H., 2003, In: Berg- und hüttenmännische Monatshefte : BHM. 148, p. 293-298

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Powder metallurgical components for light sources

    Leichtfried, G., 2003

    Research output: Thesis › Habilitation thesis › peer-review

  68. Published

    Separation of scattering contributions from carbides and gamma' precipitates in Nimonic 80a by combining small-angle X-ray and neutron scattering

    Zickler, G., Tian, B., Lind, C. & Paris, O., 2003, In: Journal of applied crystallography. 36, p. 484-488

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Structure/property relations in PVD hard coatings

    Mayrhofer, P. H., 2003, Recent Research Developments in Vacuum Science & Technology. p. 71-97

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  70. Published

    Thermische Stabilität gesputterter nanokristalliner Hartstoffschichten

    Willmann, H., Mayrhofer, P. H., Beschliesser, M. & Mitterer, C., 2003, Sonderbände der Praktischen Metallographie. DGM, p. 315-322

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. 2002
  72. Published

    Herstellung und Gefüge dünner Schichten aus CuAlNi-Formgedächtnislegierungen

    Kutschej, K., Wu, X., Mayrhofer, P. H. & Kneißl, A., 2002, Herstellung und Gefüge dünner Schichten aus CuAlNi-Formgedächtnislegierungen. Werkstoff-Informationsges., p. 261-268

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    SANS investigation of phase separation in hot-deformed Nimonic 80a

    Tian, B., Paris, O., Zickler, G., Lind, C., Wasle, G. & May, R. P., 2002, In: Scripta materialia. 47, p. 25-30

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Tribologische Eigenschaften dünner Hartstoffschichten

    Mitterer, C., Stoiber, M., Badisch, E., Fontalvo, G. & Mayrhofer, P. H., 2002,

    7. Tagung Gef?ge & Bruch

    .     p. 95-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. 2000
  76. Published

    Abrasion resistance of sputtered hard coatings

    Mayrhofer, P. H., Mitterer, C. & Berghofer, P., 2000, Materials Week 2000. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. 1996
  78. Published

    Intermetallic gamma titanium aluminides

    Clemens, H., 1996

    Research output: Thesis › Habilitation thesis › peer-review

  79. 1995
  80. Published

    Laserstrahlschweißen von Massivbauteilen

    Ebner, R., 1995

    Research output: Thesis › Habilitation thesis › peer-review

  81. 1990
  82. Published

    Thermische Forminstabilitäten lamellarer Gefüge

    Werner, R. E., 1990

    Research output: Thesis › Habilitation thesis › peer-review

Previous 1...18 19 20 21 22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben