Chair of Physical Metallurgy (420)

Organisational unit: Chair

1801 - 1900 out of 2,174Page size: 100

Research output

  1. 2006
  2. Published

    Charakterisierung von Werkzeugstählen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Combining SANS experiments with polarized and unpolarized neutrons to study precipitates in steels

    Bischof, M., Eidenberger, E. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Comparisation of Al1-xCrx-N Hard Coatings sysnthesized by Reactive Arc Evaporation & Magnetron Sputtering

    Tritremmel, C., Neidhardt, J., Sartory, B. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel

    Erlach, S. D., Leitner, H., Bischof, M., Clemens, H., Danoix, F., Lemarchand, D. & Siller, I., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 96-106

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Copper Nanowires within the Central Channel of Tobacco Mosaic Virus Particles

    Balci, S., Bittner, A. M., Hahn, K., Scheu, C., Knez, M., Kadri, A., Wege, C., Jeske, H. & Kern, K., 2006, In: Electrochimica acta. 51, p. 6251-6257

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD)

    Major, L., Morgiel, J., Major, B., Lackner, J. M., Waldhauser, W., Ebner, R., Nistor, L. & Van Tendeloo, G., 2006, In: Surface & coatings technology. 200, p. 6190-6195

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Deliverable D18: Thermal loadability, EU Projekt

    Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Design and Investigation of sputtered nanocomposite CrCx/a-C:H low-friction coatings

    Gassner, G., 2006, 127 p.

    Research output: Thesis › Doctoral Thesis

  10. Published

    Durchstoffversuche an Hartstoffschichten

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Einfluss des Aluminiumgehaltes auf die Gefügeentwicklung eines niedriglegierten TRIP-Stahls

    Spenger, F., Traint, S., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 215-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Einflussparameter auf die Zähigkeit von Maragingstählen

    Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Einfluss von Aluminiumnitrid auf die Hochtemperaturduktilität von stranggegossenen Brammen

    Winkelhofer, F., Parteder, E., Leitner, H., Clemens, H., Spiradek-Hahn, K. & Kozeschnik, E., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 281-288

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 1

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 2

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 3

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 4

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 5

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 6

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 7

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 8

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Elektronenoptische Begutachtungen und Analysen von Schweissungen - Bericht 9

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Entwicklung eines Legierungskonzeptes für einen korrosionsträgen Lagerwerkstoff für die Anwendung in Flugzeugtriebwerken

    Peißl, S. K., 2006

    Research output: Thesis › Doctoral Thesis

  24. Published

    Entwicklung von Hartstoffschichten auf Chrom-Basis mit Hilfe der Pulsed Laser Deposition

    Bachler, G., 2006, 88 p.

    Research output: Thesis › Diploma Thesis

  25. Published

    Entwicklung von hoch stickstoffhaltigen austenitischen Cr-Mn-Mo-Ni-Stählen höchster Korrosionsbeständigkeit und Festigkeit

    Saller, G., 2006, 124 p.

    Research output: Thesis › Doctoral Thesis

  26. Published

    Epitaxy and Bonding of Cu Films on Oxygen-Terminated a-Al2O3 (0001) Surfaces

    Oh, S. H., Scheu, C., Wagner, T., Tchernychova, E. & Rühle, M., 2006, In: Acta materialia. 54, p. 2685-2696

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Ermüdungsverhalten von Bohrkronen in der Bergtechnik

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Festigkeitsuntersuchungen an Bronzeschweissungen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    FFF-Projekt LowFrictionCoatings

    Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Fibrillar level fracture in bone beyond the yield point

    Gupta, H. S., Wagermaier, W., Zickler, G., Hartmann, J., Funari, S. S., Roschger, P., Wagner, H. D. & Fratzl, P., 2006, In: International Journal of Fracture. 139, p. 425-436

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Fraktographische Beurteilung von geschädigten Bauteilen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Fraktographische Beurteilung von geschädigten Bauteilen - Bericht 1

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Fraktographische Beurteilung von geschädigten Bauteilen - Bericht 2

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Fraktographische Beurteilung von geschädigten Bauteilen - Bericht 3

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Fraktographische Beurteilung von Schweissbiegproben

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Fraktographische Untersuchungen an Bauteilen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Fullerene-like carbon nitride - a new thin film material

    Neidhardt, J., Broitman, E. & Hultman, L., 2006, Wide Band Gap Materials and New Developments. p. 1-39

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  38. Published

    Gefügebewertung an einem martensitischen Werkstoff durch Transmissionselektronenmikroskopie (TEM) und Neutronenkleinwinkelstreuung (SANS)

    Sonnleitner, M., Klein, M., Spiradek-Hahn, K., Staron, P., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 97-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Gefügecharakterisierung der Randschicht und Einfluss der Anlasstemperatur auf das Korrosions - und Verschleißverhalten des Pyrowear 675 und des CSS42L im Vergleich zum M50NiL

    Paulitsch, J., 2006

    Research output: Thesis › Diploma Thesis

  40. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitischem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 379-385

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Gefügecharakterisierung von hochfesten Blechen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Gefügefeinung einer neuen, hoch niobhaltigen TiAl-Legierung durch Massivtransformation und Wärmebehandlung - Endbericht

    Scheu, C., Schnitzer, R., Chladil, H. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    High Temperature Arc Evaporation of Al1-xTixN coatings on Powder Metallurgical High-Speed Steels

    Pfeiler, M., Mitterer, C., Mayrhofer, P. H., Caliskanoglu, D., Kölker, W. & Pitonak, R., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 411-418

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    High-temperature low-friction properties of vanadium-alloyed AlCrN coatings

    Franz, R., Neidhardt, J., Sartory, B., Kaindl, R., Tessadri, R., Polcik, P., Derflinger, V. & Mitterer, C., 2006, In: Tribology Letters. 23, p. 101-107

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    High-temperature oxidation resistance of Ta-Si-N films with a high Si content

    Zeman, P., Musil, J. & Daniel, R., 2006, In: Surface & coatings technology.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    High-Temperature Tribological Behavior of Cr'N-Ag Self-lubricating Coatings

    Kutschej, K., Mitterer, C., Mulligan, C. P. & Gall, D., 2006, In: Advanced engineering materials. 8, p. 1125-1129

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    High-temperature tribological behaviour of TiN and VN coatings

    Fateh, N., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    High-temperature tribological behaviour of TiN and VN coatings

    Fateh, N., Fontalvo, G. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Hochtemperaturbeständige nanostrukturierte und intermetallische Schichten für Bauteile aus Gamma-TiAl

    Mayrhofer, P. H., Moser, M. & Rovere, F., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    identification of the different reactions taking place during a thermal treatment in order to obtain nanostructured coatings (superlattice, nanocomposite, intermetallic, TBC) ....

    Mayrhofer, P. H., Moser, M. & Rovere, F., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Influence of bainitic/martensitic microstructures on the mechanical properties of hot-work tool steels

    Mayer, S., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Influence of Pulsed Substrate Bias on the Structure and Properties of CrN Coatings Deposited by Reactive DC Magnetron Sputtering

    Grasser, S., Gassner, G., Walter, C., Daniel, R. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Influence of the Al distribution on the structure, elastic properties, and phase stability of supersaturated Ti1-xAlxN

    Mayrhofer, P. H., Music, D. & Schneider, J. M., 2006, In: Journal of applied physics. 100, p. 094906-1-94906-5

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Innovative Beschichtungen im Werkzeugbau

    Mitterer, C., 2006, In: Stahl : Zeitschrift für den High-Tech-Werkstoff . 2, p. 15-16

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Interface structure and strain development during compression tests of Al2O3/Nb/Al2O3 sandwiches

    Scheu, C., Liu, Y., Oh, S. H., Brunner, D. & Rühle, M., 2006, In: Journal of materials science. 41, p. 7798-7807

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Intermetallics for Higher, Moderate and Low Temperature Applications (HIMOLO) - Experimental characterisation: preliminary results (f) Grain-size determination and grain orientation measurements using EBSD in a SEM

    Scheu, C., Chladil, H., Clemens, H. & Ebner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    Intermetallics for Higher, Moderate and Low Temperature Applications (HIMOLO) - Specification of the heat treatment process to abtain massively transformed microstructures and first test

    Scheu, C., Chladil, H., Clemens, H. & Ebner, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  58. Published

    Intermetallische Titanaluminide: Werkstoffe für hohe Temperaturen

    Appel, F. & Clemens, H., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 195-199

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Isothermal Aging Kinetics of NiAl Precipitates in a Secondary Hardening Steel

    Erlach, S. D., Siller, I., Leitner, H. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 725-732

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Konventionelles Schmieden von Titanaluminiden

    Klauber, W., 2006, 85 p.

    Research output: Thesis › Diploma Thesis

  61. Published

    Korrosionsverhalten von Kesselblechen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Kurzzeitkriechverhalten von Warmarbeitsstählen

    Wurmbauer, H. & Scheu, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  63. Published

    Kurzzeitkriechverhalten von Warmarbeitsstählen

    Stergar, E., 2006, 77 p.

    Research output: Thesis › Diploma Thesis

  64. Published

    Lasertechnisch hergestellter Werkstoffverbund für Schneidenwerkzeuge auf Stahlbasis

    Stotter, C., 2006, 153 p.

    Research output: Thesis › Doctoral Thesis

  65. Published

    Low friction mechanisms active for TiCN

    Rebelo De Figueiredo, M., Neidhardt, J., Kaindl, R., Tessadri, R. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  66. Published

    Low friction mechanisms active for TiCN hard coatings

    Rebelo De Figueiredo, M., Neidhardt, J., Kaindl, R., Tessadri, R. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  67. Published

    Magnéli phase formation of PVD Mo-N and W-N coatings

    Gassner, G., Mayrhofer, P. H., Kutschej, K., Mitterer, C. & Kathrein, M., 2006, In: Surface & coatings technology. 201, p. 3335-3341

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Magnetron Sputtered Intermetallic Al2Au and Al-Zr-Y Coatings for the Oxidation Protection of g-TiAl

    Moser, M., Mayrhofer, P. H. & Braun, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  69. Published

    Materials Research at the Materials Center Leoben

    Ebner, R., 2006, In: Advanced engineering materials. 8, p. 1171-1177

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Metallographische Ferritbestimmung an hochlegierten Schweissungen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Metallographische Präparation von dotiertem Tantal für licht- und rasterelektronenmikroskopische Mikrostrukturuntersuchungen

    Mayer, S., Pölzl, S., Hawranek, G., Bischof, M., Scheu, C., Clemens, H. & Knabl, W., 2006, In: Practical metallography = Praktische Metallographie. 43, p. 614-628

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Metallographische Präparation von Wolfram und Wolframlegierungen zur Gefügeuntersuchung mittels licht- und rasterelektronenmikroskopischer Methoden

    Jedlicka, C., Pölzl, S., Hawranek, G., Leitner, H., Clemens, H., Stickler, R., Hoffmann, A. & Knabl, W., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 371-378

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Micro- and bonding structure of AlCrVN low-friction coatings

    Franz, R., Neidhardt, J., Sartory, B., Tessadri, R., Derflinger, V., Polcik, P. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  74. Published

    Microstructural aspects determining the adhesive wear of tool steels

    Fontalvo, G., Humer, R., Mitterer, C., Sammt, K. & Schemmel, I., 2006, In: Wear. 260, p. 1028-1034

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Microstructural characterization of modern Boron containing 9-11%Cr steels developed in the framework of the COST program

    Kauffmann, F., Mayer, K.-H., Straub, S., Zies, G., Scheu, C., Willer, D., Ruoff, H. & Maile, K., 2006, Proceeding of the 8th Liége Conference. p. 1171-1180

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Microstructural design of hard coatings

    Mayrhofer, P. H., Mitterer, C., Hultman, L. & Clemens, H., 2006, In: Progress in materials science. 51, p. 1032-1114

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Microstructural evolution of Cr-Mn-N Austenitic Steels during Cold Work Hardening

    Saller, G., Spiradek-Hahn, K., Scheu, C. & Clemens, H., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 427, p. 246-254

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Microstructure and Texture Formation during Hot Rolling of Nb-Rich Gamma TiAl Alloys with Different C Contents

    Stark, A., Bartels, A., Gerling, R., Schimansky, F.-P. & Clemens, H., 2006, In: Advanced engineering materials. p. 1101-1108

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Microstructure and Thermal Properties of Al-Au Coatings

    Moser, M., Mayrhofer, P. H., Ross, I. & Rainforth, W. M., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  80. Published

    Mikrostrukturelle Merkmale von martensitischen Chromstählen und deren Einfluss auf die Kriechfestigkeit

    Maile, K., Zies, G., Scheck, R., Kuppler, D., Ruoff, H., Rauch, M., Klenk, A. & Scheu, C., 2006, In: Practical metallography = Praktische Metallographie. 43, p. 349-363

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Mikrostrukturelle Untersuchungen an Böhler N710

    Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Mikrostruktur und mechanische Eigenschaften eines C/C-Cu Verbundes für Fusionsreaktoren

    Eidenberger, E., 2006

    Research output: Thesis › Diploma Thesis

  83. Published

    Multifunctional PVD Coatings for Cutting tools

    Pfeiler, M. & Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Multifunctional Thermal CVD (M) (S) (N) coatings for cutting

    Wagner, J. & Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Nanocomposite Ti-B-N coatings synthesized by reactive arc evaporation

    Neidhardt, J., Czigany, Z., Sartory, B., Tessadri, R., Sullivan, M. O. & Mitterer, C., 2006, In: Acta materialia. 54, p. 4193-4200

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Nanoindentation Response of High Performance Fullerene-Like CNx

    Neidhardt, J., Palacio, J. F., Bull, S. J. & Hultman, L., 2006, In: Thin solid films. 494, p. 63-68

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    NANOSURFACEENGINEERING CENTER - Infrastrukturanschaffung

    Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    NANOSURFACEENGINEERING CENTER - Planungsarbeiten für den Aufbau und die Laborausstattung

    Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    Neutronenkleinwinkelstreuung an ausscheidungsgehärteten Stählen

    Eidenberger, E., Bischof, M., Staron, P., Erlach, S. D., Leitner, H., Scheu, C. & Clemens, H., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  90. Published

    New high-performence CVD oxide based coatings

    Hochauer, D. & Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Niedrigreibungsschichten für Hochleistungskomponenten in der Antriebs- und Motorentechnik

    Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Oberflächenanalysen an hochfesten Feinblechen - Bericht 1

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Oberflächenanalysen an hochfesten Feinblechen - Bericht 2

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Oberflächenanalysen an hochfesten Feinblechen - Bericht 3

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. Published

    Oberflächenanalysen an hochfesten Feinblechen - Bericht 4

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  96. Published

    On the Development of Grain Growth Resistant Tantalum Alloys

    Bischof, M., Mayer, S., Leitner, H., Clemens, H., Staron, P., Geiger, E., Voiticek, A. & Knabl, W., 2006, In: International journal of refractory metals & hard materials. 24, p. 437-444

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    On the texture of spray formed gamma titanium aluminide

    Staron, P., Bartels, A., Brokmeier, H.-G., Gerling, R., Schimansky, F.-P. & Clemens, H., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 416, p. 11-17

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Phasenreaktionen in hochcarbidhaltigen Nickelbasislegierungen

    Jönzen, M., Ebner, R., Leitner, H. & Caliskanoglu, D., 2006, In: HTM - journal of heat treatment and materials . 61, p. 121-127

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Phase Transformations in High Niobium and Carbon Containing g-TiAl Based Alloys

    Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R., Schimansky, F. P. & Kremmer, S., 2006, In: Intermetallics. 14, p. 1194-1198

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Phase Transitions and Recrystallization in a Ti-46at%Al-9at%Nb Alloy as Observed by In-situ High-Energy X-ray Diffraction

    Liss, K.-D., Clemens, H., Bartels, A., Stark, A. & Buslaps, T., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    Physisorbed films in periodic mesoporous silica studied by in-situ synchrotron small-angle diffraction

    Zickler, G., Jähnert, S., Wagermaier, W., Funari, S. S., Findenegg, G. H. & Paris, O., 2006, In: Physical review : B, Condensed matter and materials physics. 73, p. 184109-184109

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...15 16 17 18 19 20 21 22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben