Chair of Physical Metallurgy (420)

Organisational unit: Chair

851 - 900 out of 2,174Page size: 50

Research output

  1. 2015
  2. Published

    Stacking fault energies and the generalized stacking fault energy of γ-TiAl (ongoing Masterthesis)

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    Structural and mechanical properties of nitrogen-deficient cubic Cr-Mo-N and Cr-W-N systems

    Zhou, L., Klimashin, F., Holec, D. & Mayrhofer, P., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  4. Published

    Structural characterization of "carbide-free" bainite in a Fe-0.2C-1.5Si-2.5Mn steel

    Hofer, C., Harald, L., Winkelhofer, F., Clemens, H. & Primig, S., 2015, In: Materials characterization. 102, p. 85-91

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Supersaturated intermetallic phases within the ternary Mo-Cr-N system

    Klimashin, F., Euchner, H., Holec, D. & Mayrhofer, P., 2015.

    Research output: Contribution to conference › Presentation › Research

  6. Published

    Synergy of atom-probe structural data and quantum-mechanical calculations in a theory-guided design of extreme-stiffness superlattices containing metastable phases

    Friak, M., Tytko, D., Holec, D., Choi, P. P., Eisenlohr, P., Raabe, D. & Neugebauer, J., 2015, In: New journal of physics. 17, p. 093004-1-093004-8

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Temperature-dependent deformation of ufg materials and composites

    Maier-Kiener, V., Leitner, A., Kreuzeder, M., Primorac, M.-M., Hosemann, P. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  8. Published

    Texture evolution during deformation of a Mo-Hf-C alloy studied with electron backscatter diffraction

    Lang, D., Schatte, J., Knabl, W., Clemens, H. & Primig, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 226-230

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Theory-guided design of high-performance superlatticescontaining metastable phases exemplified by nano-scale CrN/AlN

    Friak, M., Tytko, D., Holec, D., Choi, P. P., Eisenlohr, P., Raabe, D. & Neugebauer, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Theory-guided design of high-strength superlattices containing metastable phases: example of nano-scale CrN/AlN

    Friak, M., Tytko, D., Holec, D., Choi, P. P., Eisenlohr, P., Raabe, D. & Neugebauer, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  11. Published

    Theory-guided materials design of high-performance superlattices containing metastable phases: example of nano-scale CrN/AlN

    Friák, M., Tytko, D., Holec, D., Choi, P. P., Eisenlohr, P., Raabe, D. & Neugebauer, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Thermal expansion of rock-salt cubic AlN

    Bartosik, M., Todt, M., Holec, D., Todt, J., Zhou, L., Riedl, H., Böhm, H. J., Rammerstorfer, F. G. & Mayerhofer, P. H., 2015, In: Applied physics letters. 107, p. 071602-1 - 071602-5

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Thermo-mechanical properties of fine grained materials: Porous vs. crystalline vs. Composite

    Kiener, D., Kreuzeder, M., Primorac, M.-M., Leitner, A., Abad, M. D., Hosemann, P. & Maier-Kiener, V., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  14. Published

    Thermo-mechanical properties of ultra-fine grained fcc-bcc composites

    Maier-Kiener, V., Primorac, M.-M., Leitner, A., Kreuzeder, M. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  15. Published

    The role of metallography in the development and characterization of high-performance materials

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    The use of atom probe tomography for the characterization and development of intermetallic γ-TiAl based alloys

    Klein, T., Schachermayer, M., Mendez Martin, F., Holec, D., Rashkova, B., Schöberl, T., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  17. Published

    Verformungsinduzierte Ausscheidungsbildung von Hafniumkarbiden in der Molybdänbasislegierung MHC (Mo-Hf-C)

    Dallinger, R., 2015

    Research output: Thesis › Diploma Thesis

  18. Published

    Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., 2015, Sonderbänder der praktischen Metallographie 47. p. 203-208

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Versagen von feuerverzinkten Stahlbauteilen - Gefüge und Versagen von Werkstoffen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P., Kaiser, R., Spiradek-Hahn, K. & Brabetz, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  20. Published

    Verzug von diamantbeschichtetem Hartmetallwerkzeug

    Reinhart, R., 2015

    Research output: Thesis › Diploma Thesis

  21. Published

    Vorzeitiges Versagen von profilierten Stahlrohren

    Schütz, P. & Panzenböck, M., 2015, p. 265.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. 2014
  23. E-pub ahead of print

    Complementary ab initio and X-ray nanodiffraction studies of Ta2 O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayerhofer, P. H., 30 Oct 2014, (E-pub ahead of print) In: Acta materialia. 83.2015, 15 January, p. 276-284 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Komplementäre Werkstoffcharakterisierung am Department Metallkunde und Werkstoffprüfung

    Mayer, S., Panzenböck, M. & Clemens, H., 6 Aug 2014, In: Dialog : Materialwissenschaft und Werkstofftechnik . p. 56-57

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation

    Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Jul 2014, In: Materials Science and Engineering A. 608, p. 114-122 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution

    Daniel, R., Jäger, E., Todt, J., Sartory, B., Mitterer, C. & Keckes, J., 28 May 2014, In: Journal of applied physics. 115, 20, 203507.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    On the slowdown of the crack propagation rate of austenitic stainless steels in corrosive environment

    Kapp, M., Fluch, R., Martinez, C., Pippan, R., Mori, G., Vichytil, C., Sonnleitner, R. & Panzenböck, M., 1 Jan 2014, International Corrosion Conference series / National Association of Corrosion Engineers. (NACE - International Corrosion Conference Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    60. Metallkunde Jubiläumskolloquium - Abstractband

    Mitterer, C. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  29. Published

    Ab initio evaluation of the potential use of Sc-based III-nitrides in optoelectronics

    Holec, D., Zhang, S., Fu, W. Y., Humphreys, C. J., Mayrhofer, P. H. & Moram, M. A., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Ab initio study of point defects in NiTi-based alloys

    Holec, D., Friák, M., Dlouhý, A. & Neugebauer, J., 2014, In: Physical review : B, Condensed matter and materials physics. 89, p. 0141101-0141106

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

    Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014, Materials Research Society Symposium Proceedings Vol. 1760 Materials Research Society.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Advanced Steels

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Alloying element distribution within the constituent phases of a C-containing γ-TiAl based alloy studied by atom probe tomography

    Klein, T., Mendez Martin, F., Schachermayer, M., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. Published

    A novel approach for site-specific atom probe specimen preparation by FIB and transmission-EBSD

    Babinsky, K., De Kloe, R., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  37. Published

    A novel approach for site-specific atom probe specimen preparation by focused ion beam and transmission electron backscatter diffraction

    Babinsky, K., De Kloe, R., Clemens, H. & Primig, S., 2014, In: Ultramicroscopy. 144, p. 9-18

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    APT/FIM and neutron diffraction study of the ordering mechanism in a Fe-Co-Mo-alloy

    Turk, C., Primig, S., Clemens, H., Leitner, H. & Kellezi, G., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  39. Published

    Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy

    Juan, J. S., Simas, P., Schmölzer, T., Clemens, H., Mayer, S. & No, M. L., 2014, In: Acta materialia. 65, p. 338-350

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Atom probe investigations in low carbon steel on Arvedi endless strip production line

    Mendez Martin, F. & Bragin, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Atom probe study of boron segregation in a martensitic steel prepared according to a novel FIB/t-EBSD preparation technique

    Turk, C., Babinsky, K., Haslberger, P., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Atom probe study of grain boundaries in technically pure molybdenum

    Babinsky, K., Knabl, W., Lorich, A., De Kloe, R., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  43. Published

    Atom probe study of grain boundary segregation on technically pure molybdenum

    Babinsky, K., Weidow, J., Knabl, W., Lorich, A., Leitner, H. & Primig, S., 2014, In: Materials characterization. 87, p. 95-103

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Atom probe tomography of carbides occuring in "carbide-free" bainitic steels

    Hofer, C., Winkelhofer, F., Krammerbauer, J., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  45. Published

    B2 order transformation in a Fe - 25 at% Co - 9 at% Mo alloy

    Turk, C., Kellezi, G., Leitner, H., Gan, W., Staron, P., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  46. Published

    Bruchmechanisches Verhalten von hochfesten Baustählen und deren Schweißverbindungen

    Horn, A., 2014

    Research output: Thesis › Doctoral Thesis

  47. Published

    Buckling of ZnS-filled single-walled carbon nanotubes - The influence of aspect ratio

    Monteiro, A. O., Costa, P. M. F. J., Cachim, P. B. & Holec, D., 2014, In: Carbon. 79, p. 529-537

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Characterization of a TNM alloy for high performance automotive applications

    Weißensteiner, I., 2014

    Research output: Thesis › Diploma Thesis

  49. Published

    Characterization of the crack initiation and crack propagation behavior of welded steels by means of the replica technique

    Panzenböck, M., Horn, A., Posch, G. & Clemens, H., 2014, In: Practical metallography = Praktische Metallographie. 51, p. 557-567

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Charakterisierung des Warmumformverhaltens zweier Legierungen im System TiAl-Mo

    Godor, F. R., 2014

    Research output: Thesis › Diploma Thesis

  51. Published

    Combining Fib, t-EBSD and atom probe tomography for full chemical and crystallographic materials characterization

    Babinsky, K., De Kloe, R., Haslberger, P., Hofer, C., Lang, D., Turk, C., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  52. Published

    Compositional induced changes in optical response of Si-doped titanium dioxide

    Ondracka, P., Holec, D., Franta, D., Kedronova, E., Elisabeth, S., Goullet, A. & Zajickkova, L., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...14 15 16 17 18 19 20 21 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben