Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

951 - 1000 out of 2,399Page size: 50

Research output

  1. 2015
  2. Published

    Impact of microstructural characteristics on the corrosion morphology of high strength brazing sheets

    Kremmer, T., Antrekowitsch, H., Oberhauser, P., Hanko, G. & Mori, G., 2015, Proceedings of EMC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Implementation of Alternative Reducing Agents in Metallurgical Operations

    Rösler, G., 2015

    Research output: Thesis › Doctoral Thesis

  4. Published

    Influence of Alloy Production History on Natural Aging of AA6061 Modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 2015, Proceedings of EMC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Influence of temperature on natural aging kinetics of AA6061 modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 2015, Light Metals 2015: TMS (The Minerals, Metals & Materials Society), 2015. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Konzepte zur Optimierung der Ausscheidungsbildung in Al-Mg-Si Legierungen

    Pogatscher, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    Korngrößenbestimmung von unbekannten Aluminiumprofilen

    Kolb, G. & Felser, J., 2015, 11 p.

    Research output: Book/Report › Commissioned report › Transfer

  8. Published

    Legierungselemente und Wärmebehandlungen von Aluminiumknetlegierungen der 7xxx-Serie

    Kolb, G., 2015.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Legierungs- und Prozessdesign von Al-Mg-Si Knetlegierungen für den Automobilbau

    Prillhofer, R., 2015

    Research output: Thesis › Doctoral Thesis

  10. Published

    Methoden der Pulvercharakterisierung Enabling & Efficient Cold Gas Spraying

    Ratschbacher, K., 2015

    Research output: Book/Report › Other report › Research

  11. Published

    New development in metal recovery from secondary resources

    Pichler, C., Antrekowitsch, H. & Rumpold, R., 2015, p. 115. 127 p.

    Research output: Contribution to conference › Paper

  12. Published

    Optimierung der Eigenschaften plattierter 7xxx-Werkstoffe (Projektabschluss)

    Kremmer, T. & Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    Optimierung der pyrolytischen Vorbehandlung von Leiterplattenschrotten unter besonderer Betrachtung der Bromgewinnung

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2015, Recycling und Rohstoffe. Neuruppin: TK-Verl., Vol. 8. p. 325 - 344 19 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Optimierung des Al-Recyclingprozesses von verunreinigten Schrotten

    Pirker, A., 2015

    Research output: Thesis › Doctoral Thesis

  15. Published

    Oxidation kinetics of a molybdenum-tantalum-alloy

    Ratschbacher, K. & Luidold, S., 2015, p. 771-782.

    Research output: Contribution to conference › Paper › peer-review

  16. Published

    Potential of a hydrometallurgical recycling process for catalysts to cover the demand for critical metals, like PGM and cerium

    Steinlechner, S. & Antrekowitsch, J., 2015, In: JOM. p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    POTENTIAL OF INDUSTRIAL WASTES RECYCLING FROM LEAD, ZINC OR COPPER INDUSTRY TO CONTRIBUTE TO THE SUPPLY OF MINOR METALS

    Steinlechner, S. & Antrekowitsch, J., 2015, SIPS2015 – Sustainable Industrial Processing Summit and Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Potential of lead, zinc and copper containing residues to contribute to the supply of minor metals

    Steinlechner, S. & Antrekowitsch, J., 2015, Wastes Solutions Treatments Opportunities. p. 341-357

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Quantitative und qualitative Identifikation von relevanten sekundären Stoffströmen in Österreich: Industrielle Prozesse / Technologien

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  20. Published

    Quantitative und qualitative Identifikation von relevanten sekundären Stoffströmen in Österreich: Industrielle Prozesse / Technologien

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    Recovery of Lead in Residues from Hydrometallurgical Zinc Winning

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  22. Published

    Recycling of aluminium powdered waste

    Zöhrer, M. & Angerer, T., 2015, European metallurgical Conference-EMC 2015. Clausthal-Zellerfeld, Vol. 2. p. 1132 1133 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Recycling of Complex Materials with Focus on Zinc-, Lead- Containing Residues

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    Recycling of low grade aluminium scrap: Optimisation of the melting process by using oxyfuel technology

    Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  25. Published

    Recycling of Nd2Fe14B Magnets

    Stuhlpfarrer, P., Luidold, S. & Antrekowitsch, H., 2015, p. 925-938. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  26. Published

    Recycling of refractory metals

    Ratschbacher, K., 2015

    Research output: Thesis › Doctoral Thesis

  27. Published

    Recycling of Zinc Shortcourse EMC

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Recycling von Elektronikschrott unter besonderer Berücksichtigung der Sondermetalle und Seltenen Erden

    Stuhlpfarrer, P., 2015

    Research output: Thesis › Doctoral Thesis

  29. Published

    Recycling von Produktionsrückständen aus der metallverarbeitenden Industrie

    Zöhrer, M., Angerer, T., Antrekowitsch, H. & Kügele, A., 2015, Recycling und Rohstoffe. Neuruppin, Vol. 8. p. 371 384 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Recycling von sekundären Batteriesystemen

    Kaindl, M., 2015

    Research output: Thesis › Doctoral Thesis

  31. Published

    Reprint of: Characterization of bulk metallic glasses via fast differential scanning calorimetry

    Pogatscher, S., Leutenegger, D., Hagmann, A., Uggowitzer, P. J. & Löffler, J. F., 2015, In: Thermochimica Acta. 603, 10, p. 46-52

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Resources, Recycling, Claims

    Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Reststoffe aus der Metallurgie: Potential oder Konkurrenz für die Mineralrohstoffindustrie?

    Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Rückgewinnung ausgewählter kritischer Rohstoffe aus einem hydrometallurgischen Magnet-Recyclingprozess

    Alf, O., 2015

    Research output: Thesis › Master's Thesis

  35. Published

    Rückgewinnung von kritischen Metallen aus Rückständen der Leiterplatten Aufbereitung

    Benigni, C., 2015

    Research output: Thesis › Master's Thesis

  36. Published

    Solute transport in age-hardenable aluminum alloys

    Pogatscher, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  37. Published

    Stahlwerksstaubrecycling im 21. Jahrhundert, aktuelle Entwicklungen und zukünftige Herausforderungen

    Antrekowitsch, J., 2015, Berliner Recycling und Rohstoffkonferenz.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  38. Published

    Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys

    Pogatscher, S., Antrekowitsch, H., Werinos, M., Rank, G., Kaiß, A., Prillhofer, R., Löffler, J. F. & Uggowitzer, P. J., 2015, TMS Light Metals 2015. Hyland, M. (ed.).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys

    Pogatscher, S., Antrekowitsch, H., Werinos, M., Rank, G., Kaiß, A., Prillhofer, R., Löffler, J. F. & Uggowitzer, P. J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    Steel Mill Dust Recycling in the 21st Century

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Paper › peer-review

  41. Published

    Steel Mill Dust Recycling in the 21st Century

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    Stoffliches Recycling von Elektronikschrott - eine Herausforderung für die Zukunft

    Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Sustainable ways to recycle metallurgical residues in the 21st century

    Pichler, C., 2015, Proceedings of Lead-Zinc Conference Pb-Zn 2015. p. 65-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Technical optimization and economic evaluation of the lead bath recycling process

    Böckl, B., 2015

    Research output: Thesis › Master's Thesis

  45. Published

    Technical presentation – Nonferrous Metallurgy

    Steinlechner, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  46. Published

    The current status of mini mill solutions for the recycling of steel mill dusts

    Antrekowitsch, J. & Steinlechner, S., 2015, SIPS2015 – Sustainable Industrial Processing Summit and Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    The current status of mini mill solutions for the recycling of steel mill dusts - new aspects in hydrometallurgy

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    TiO2-Pigmentherstellung – Technik und Wirtschaftlichkeit eines kombinierten Verfahrens

    Miedler, P., 2015

    Research output: Thesis › Master's Thesis

  49. Published

    Treatment of industrial waste

    Zöhrer, M., Angerer, T., Antrekowitsch, H. & Duspiva, F., 2015, European metallurgical Conference-EMC 2015. Clausthal-Zellerfeld, Vol. 2. p. 833 844 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Untersuchung des Einflusses von einzelnen Parametern auf die Zinnausbringung im Konverterstaub

    Kaisergruber, F., 2015

    Research output: Thesis › Master's Thesis

  51. Published

    Untersuchungen zum Verhalten von Silber und Indium in Rückständen der Zinkindustrie in einem pyrometallurgischen Aufarbeitungsschritt

    Leuchtenmüller, M., 2015

    Research output: Thesis › Master's Thesis

Previous 1...16 17 18 19 20 21 22 23 ...48 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 oder 5204