Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

51 - 100 out of 2,400Page size: 50

Research output

  1. 2024
  2. Published

    Hydrometallurgical extraction of valuable metals from electric arc furnace dust originated in stainless steel production

    Howard, T. W., 2024

    Research output: Thesis › Master's Thesis

  3. Published

    Hydrometallurgical treatment of Cr-Ni rich dust: Investigation regarding the extraction of Cr and Ni from stainless steel dust using different acids

    Howard, T. W., 2024.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Interfacial Reaction Between Magnesia Refractory and Lithium Ion Battery (LIB) Recycling Slags

    Toulabi Fard, A. H., 2024

    Research output: Thesis › Master's Thesis

  5. Published

    Measurement of the heat transfer in the primary cooling area of a laboratory direct chill casting plant for alloy design.

    Weidinger, A., 2024, Light Metals 2024. p. 1055 - 1061 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Microstructure evolution in Al-Mg-Si alloys controlled by Fe-rich intermetallic primary phases

    Trink, B., 2024.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Mineralische Nebenprodukte und Abfälle 11: - Aschen, Schlacken, Stäube und Baurestmassen -

    Thiel, S., Thomé-Kozmiensky, E., Antrekowitsch, H., Pomberger, R. & Firsbach, F., 2024, 323 p.

    Research output: Book/Report › Anthology › Research

  8. Published

    Nutzbarmachung von industriellen Reststoffen wie Stäuben, Schlämmen und Schlacken – Beurteilungssystem zur Erfassung und wirtschaftlichen Bewertung von sekundären Ressourcen

    Hanke, G. & Antrekowitsch, J., 2024, Mineralische Nebenprodukte und Abfälle 11 – Aschen, Schlacken, Stäube und Baurestmassen –. Vol. 11.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Optimization and investigations along the industrial establishment of 5/7 crossover alloys

    Samberger, S., 2024

    Research output: Thesis › Doctoral Thesis

  10. Published

    Optimization of Reaction Parameters for Hydrogen Reduction of Electric Arc Furnace Dust

    Keuschnig, A., 2024

    Research output: Thesis › Master's Thesis

  11. Published

    Parameter variation study to optimize the extraction of chromium and nickel from stainless steel dust with hydrochloric acid

    Howard, T. W. & Steinlechner, S., 2024, 2024 - Sustainable Industrial Processing Summit : SIPS2024 Volume 10th Intl. Symp. on Sustainable Non-ferrous Smelting & Hydro/Electrochemical Processing.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Pilot Plant for Hydrogen and Carbon Production via Methane Pyrolysis

    Wibner, S., 2024.

    Research output: Contribution to conference › Paper › peer-review

  13. Published

    Precious and critical metal potential of historic Cu-Au-As mine waste in the Eastern Alps

    Gopon, P., Hiller, J. M., Göbel, E., Bertrandsson Erlandsson, V., Douglas, J., Hanke, G., Felfer, P., Irrgeher, J., Wagner, S., Sánchez, F., Angerer, T., Hartlieb, P. & Antrekowitsch, J., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Spinel crystal formation in BOF slags: influence of different heat treatments and additives on chromium enrichment

    Haslinger, G., 2024

    Research output: Thesis › Doctoral Thesis

  15. Published

    Untersuchung des Systems Eisen-Silizium-Mangan als Flüssigmetallkatalysator für die Methanpyrolyse

    Scherr, C., 2024

    Research output: Thesis › Master's Thesis

  16. Published

    Untersuchungen im Rahmen der Verarbeitung von EM-haltigen komplexen Rohstoffen auf CuPb-Basis

    Zschiesche, C., 2024

    Research output: Thesis › Doctoral Thesis

  17. 2023
  18. Published

    Recycling aluminum alloys for the automotive industry: Breaking the source-sink paradigm

    Krall, P., Weißensteiner, I. & Pogatscher, S., 18 Dec 2023, In: Resources, Conservation and Recycling. 202.2024, January, 11 p., 107370.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Recycling, reuse, circular economy

    Part, F., Jandric, A., Gerold, E., Rutrecht, B., Prenner, S. & Nigl, T., 14 Dec 2023, Energy, environment, and resources.

    Research output: Chapter in Book/Report/Conference proceeding › Entry for encyclopedia/dictionary › Research

  20. Published

    Bio-metallurgical recovery of lithium, cobalt, and nickel from spent NMC lithium ion batteries: A comparative analysis of organic acid systems

    Gerold, E., Kadisch, F., Lerchbammer, R. & Antrekowitsch, H., 12 Dec 2023, In: Journal of hazardous materials advances. 13.2024, February, 13 p., 100397.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    FFG-Endbericht: Innovationsscheck mit Selbstbehalt, Umfassende Charakterisierung von Aluminiumkrätzen

    Wibner, S. & Antrekowitsch, H., Dec 2023

    Research output: Book/Report › Commissioned report › Research

  22. Published

    Simultaneous Extraction of Valuable Metals from Iron-Containing Residues by Selective Chlorination and Evaporation

    Steinlechner, S. & Witt, K., Dec 2023, In: Mining, Metallurgy and Exploration. 40.2023, 6, p. 2023-2036 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Precipitation behaviour in AlMgZnCuAg crossover alloy with coarse and ultrafine grains

    Willenshofer, P., Tunes, M. A., Kainz, C., Renk, O., Kremmer, T., Gneiger, S., Uggowitzer, P. & Pogatscher, S., 15 Nov 2023, In: Materials Research Letters. 11.2023, 12, p. 1063-1072 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Strain-induced clustering in Al alloys

    Aster, P., Dumitraschkewitz, P., Uggowitzer, P., Schmid, F., Falkinger, G., Strobel, K., Kutleša, P., Tkadletz, M. & Pogatscher, S., 11 Nov 2023, In: Materialia. 32.2023, December, 7 p., 101964.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Methane Pyrolysis in a Liquid Metal Bubble Column Reactor for CO2-Free Production of Hydrogen

    Neuschitzer, D., Scheiblehner, D., Antrekowitsch, H., Wibner, S. & Sprung, A., 12 Oct 2023, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 16.2023, 20, 20 p., 7058.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Fabrication of bulk delta-phase Zirconium Hydride from Zircaloy-4 for use as moderators in microreactors

    Parkison, D., Tunes, M., Nizolek, T. J., Saleh, T. A., Hosemann, P. M. & Kohnert, C., 10 Oct 2023, (E-pub ahead of print) In: Scripta Materialia. 239.2024, 15 January, 7 p., 115771.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy

    Burtscher, M., Weißensteiner, I., Wartbichler, R., Kirchheimer, K., Bernhard, C., Kiener, D. & Clemens, H., 4 Oct 2023, In: Journal of alloys and compounds. 969.2023, 25 December, 7 p., 172400.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influence of TiO2 on the crystallization behavior of BOF slag

    Steinlechner, S., 26 Sept 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Influence of TiO2 on the crystallization behavior of BOF slag

    Steinlechner, S. & Haslinger, G. (Co-editor), 26 Sept 2023.

    Research output: Contribution to conference › Abstract › peer-review

  30. E-pub ahead of print

    Towards a sustainable approach using mineral or carboxylic acid to recover lithium from lithium iron phosphate batteries

    Gerold, E., Lerchbammer, R., Strnad, C. & Antrekowitsch, H., 16 Sept 2023, (E-pub ahead of print) In: Hydrometallurgy. 222.2023, October, 12 p., 106187.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys

    Trink, B., Weißensteiner, I., Uggowitzer, P., Strobel, K., Hofer-Roblyek, A. & Pogatscher, S., 15 Sept 2023, In: Acta Materialia. 257.2023, 15 September, 27 p., 119160.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    PROCESSING A HYDROCARBON USING PYROLYSIS, METHOD AND APPARATUS

    Wibner, S. (Inventor), Sprung, A. (Inventor), Antrekowitsch, H. (Inventor), Neuschitzer, D. (Inventor) & Scheiblehner, D. (Inventor), 14 Sept 2023, IPC No. B01J8/22, C01B3/26, Patent No. WO2023169691A1·2023-09-14, Priority date 3 Nov 2022, Priority No. EP2022056379W·2022-03-11

    Research output: Patent

  33. E-pub ahead of print

    Assessment of different processing strategies to fabricate bulk Mg-Fe nanocomposites

    Roostaei, M., Uggowitzer, P., Pippan, R. & Renk, O., 12 Sept 2023, (E-pub ahead of print) In: Journal of Alloys and Metallurgical Systems. 4.2023, December, 9 p., 100034.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    The use of treated lead slag as a substitute for natural sand in concretes

    Wölfler, C., Hanke, G. & Antrekowitsch, J., 6 Sept 2023, p. 355. 360 p.

    Research output: Contribution to conference › Paper › peer-review

  35. Published

    Ce nanoparticles and sol-gel hybrid organic-inorganic coatings maximize corrosion protection in the anodized AA2024-T3

    Prada Ramirez, O. M., Kremmer, T., Marin, J. H., da Silva, B. P., Starykevich, M., Tunes, M., Ferreira, M. G. S., Aoki, I. V., Ando, R. A., Pogatscher, S. & de Melo, H. G., 15 Aug 2023, In: Corrosion science. 221.2023, 15 August, 21 p., 111330.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Comparison of reduction kinetics of Fe2O3, ZnOFe2O3 and ZnO with hydrogen (H2) and carbon monoxide (CO)

    Brandner, U. & Leuchtenmüller, M., 2 Aug 2023, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 49.2024, Part A, 2 January, p. 775-785 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Gluconic Acid Leaching of Spent Lithium-Ion Batteries as an Environmentally Friendly Approach to Achieve High Leaching Efficiencies in the Recycling of NMC Active Material

    Lerchbammer, R., Gerold, E. & Antrekowitsch, H., 25 Jul 2023, In: Metals : open access journal . 13.2023, 8, 21 p., 1330.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Effect of compressibility on industrial DC electric arcs

    Al Nasser, M., Barati, H., Redl, C., Ishmurzin, A., Voller, N., Hackl, G., Leuchtenmüller, M., Wu, M. & Kharicha, A., 22 Jul 2023, In: Results in Engineering. 19.2023, September, 12 p., 101312.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Hydrogen Production by Methane Pyrolysis in Molten Cu-Ni-Sn Alloys

    Scheiblehner, D., Antrekowitsch, H., Neuschitzer, D., Wibner, S. & Sprung, A., 21 Jul 2023, In: Metals. 13.2023, 7, 15 p., 1310.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Methane pyrolysis for hydrogen production in a liquid metal bubble column reactor

    Neuschitzer, D., 10 Jul 2023.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructure

    Schimbäck, D., Kaserer, L., Mair, P., Palm, F., Leichtfried, G. J., Pogatscher, S. & Hohenwarter, A., Jul 2023, In: International Journal of Fatigue. 172.2023, July, 14 p., 107592.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    In situ transmission electron microscopy as a toolbox for the emerging science of nanometallurgy

    Santa Rosa Coradini, D., Tunes, M. A., Willenshofer, P., Samberger, S., Kremmer, T., Dumitraschkewitz, P., Uggowitzer, P. & Pogatscher, S., 16 Jun 2023, In: Lab on a Chip. 23.2023, 14, p. 3186-3193 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Deformation Analysis in Novel Aluminum Alloys

    Weißensteiner, I., 15 Jun 2023, EMC 2023 Proceedings. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Characterisation and evaluation of biochar for use in metallurgical aggregates

    Dornig, C., 14 Jun 2023.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Characterisation of aluminium scrap on a laboratory scale

    Wibner, S. & Antrekowitsch, H., 14 Jun 2023, p. 1-11. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  46. Published

    Evaluation and characterization of biochar for use in metallurgical aggregates

    Dornig, C., 14 Jun 2023.

    Research output: Contribution to conference › Paper › peer-review

  47. Published

    Modification of heavy metal containing slags for use as sand substitute in concrete

    Wölfler, C., Antrekowitsch, J. & Hanke, G., 13 Jun 2023.

    Research output: Contribution to conference › Paper › peer-review

  48. Published

    Organic acids and their crucial role in establishing a sustainable process route in the recycling of lithium-ion batteries

    Lerchbammer, R., Gerold, E. & Antrekowitsch, H., 13 Jun 2023.

    Research output: Contribution to conference › Paper › peer-review

  49. Published

    SeLiReco 2.0 - A more sustainable process for the recycling of lithium-ion batteries

    Gerold, E., Lerchbammer, R. & Antrekowitsch, H., 13 Jun 2023, p. 1. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  50. Published

    Avoidance of quantity limitations in the use of fluorine - containing feedstocks through selective removal in the zinc production process

    Steinlechner, S., 12 Jun 2023.

    Research output: Contribution to conference › Presentation › Research › peer-review

  51. Published

    Investigation of the influence of different parameters on the pyrolysis of coated aluminium scrap by thermogravimetry and optical evaluation

    Büchner, K., 12 Jun 2023.

    Research output: Contribution to conference › Paper › peer-review

  52. Published

    Recycling of cemented carbides with gaseous zinc including particular consideration of GGI

    Luznik, L. T., Gerold, E., Luidold, S., Weirather, T., Pachlhofer, J., Czettl, C., Karhumaa, T. & Antrekowitsch, H., 12 Jun 2023, Proceedings of EMC 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 8 ...48 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 oder 5204