Chair of Metal Forming (560)

Organisational unit: Chair

601 - 700 out of 731Page size: 100

Research output

  1. 2006
  2. Published

    Lehrstuhl für Umformtechnik

    Buchmayr, B., Harrer, O.-K. & Sommitsch, C., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 271-275

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Methodik zur strukturierten Analyse eines Kaltprofilierprozesses am Beispiel der Herstellung von längsnahtgeschweißten Edelstahlrohren

    Weiß, S. & Buchmayr, B., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 337-343

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Modellierung der duktilen Schädigung einer Nickelbasislegierung unter Berücksichtigung der Werkstoffentfestigung bei der Warmumformung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, XXV. Verformungskundliches Kolloquium,. p. 167-183

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Modellierung der duktilen Schädigung während der Warmumformung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Modellierung des Aluminium- und Kupfer-Strangpressens unter dem Aspekt der Lebensdauervorhersage der Werkzeuge und Rezipienten – Teil 2

    Sommitsch, C., Wlanis, T., Krumphals, F. & Planitzer, F., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Modelling ductile damage of a Ni-base alloy considering the microstructure evolution during hot working

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, In: Steel grips : journal of steel and related materials. 4, p. 56-63

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Modelling of creep-fatigue in extrusion dies

    Sommitsch, C., Wlanis, T. & Wieser, V., 2006, XXV. Verformungskundliches Kolloquium. p. 193-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Neue Wärmebehandlung für beste mechanische Eigenschaften im Aluminium-Druckguss

    Rockenschaub, H., Pabel, T., Geier, G. F., Holzer, H. & Hopfinger, M., 2006, In: Giesserei. p. 20-33

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    On modelling of dynamic recrystallisation of fcc materials with low stocking fault energy

    Sommitsch, C. & Mitter, W., 2006, In: Acta materialia. p. 357-375

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    On the modelling of the interaction of materials softening and ductile damage during hot working of Alloy 80A

    Sommitsch, C., Pölt, P., Rüf, G. & Mitsche, S., 2006, In: Journal of materials processing technology. 177, p. 282-286

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Optimierung der mechanischen Eigenschaften von AlMgSi-Druckgusslegierungen

    Trenda, G., Kraly, A., Pabel, T. & Rockenschaub, H., 2006, In: Gießerei-Rundschau. p. 48-49

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Optimization of the Thermo-Mechanical Processing of Direct Air cooled Steels

    Lehofer, H., Gelder, S., Taschauer, M. & Buchmayr, B., 2006, 15th IFHTSE (International Federation of Heat-Treatment and Surface Congress 2006). p. 155-160

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Parhaat lujuusarvot Al-painevaluille (Die besten Festigkeitswerte im Al-Druckguss)

    Rockenschaub, H., Pabel, T., Geier, G. F., Holzer, H. & Hopfinger, M., 2006, In: valimoviesti - Suomen Valimotekninen Yhdistys. 4, p. 34-35

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Präsentation "Simulation of the radial forging process of pipes", Workpackage 1, Projekt P056-01-10, Juli 2006

    Hatzenbichler, T. & Wallner, S., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Präsentation "Simulation of the radial forging process of pipes", Workpackage 2, Projekt P056-01-10, August 2006

    Hatzenbichler, T. & Wallner, S., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Präsentation "Simulation of the radial forging process of pipes", Workpackage 3, Projekt P056-01-10, Juli 2006

    Hatzenbichler, T. & Wallner, S., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Projektbericht "Berechnung der Werkzeugbelastung unter Verwendung der bisherigen Modelle für die Geometrien "Audi" und "TKP", MCL Projekt M8, März 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Projektbericht P056-01-07 "Simulation of Radial Forging - Results with lower friction (shear 0,2) between mandrel and workpiece

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Projektbericht Projekt P056-LA-01-05 "Zwischenbericht über die Tätigkeiten im ersten Forschungsjahr 03/2005 bis 02/2006"

    Buchmayr, B., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Projektbericht "Simulation der Werkzeugbelastung für schrägverzahnte Zahnräder", Projekt MCL M8, November 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Projektbericht "Simulation des Denscal-Prozesses für eine Kupplungsklaue"

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Projektbericht "Simulation des Walzprozesses für die Geometrie "B", MCL Projekt M8, Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Projektbericht "Simulation des Walzprozesses für die Geometrie "TKP"", MCL Projekt M8, Jänner 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Projektbericht "Simulation des Walzprozesses für die Geometrie "VW", MCL Projekt M8, Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Projektbericht "Stand der Simulation des Walzprozesses, Juli 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Projektbericht "Stand der Simulation des Walzprozesses", Juni 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Projektbericht "Stand der Simulation des Walzprozesses, MCL Projekt M8, September 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Projektbericht "Stand des Simulation des Walzprozesses", Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Projektbericht "Versuch der Vorformauslegung für die Geometrie VW" Projekt MCL M8, April 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Projektstatus 1. Quartal 2006, MCL Projekt M8

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Projektstatus 2. Quartal 2006, MCL Projekt M8

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Projektstatus 3. Quartal 2006, MCL Projekt M8

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Quantitative Metallography

    Mitsche, S., Pölt, P. & Sommitsch, C., 2006, In: GIT imaging & microscopy. 1, p. 38-39

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Radial forging of a nickel base alloy at different temperatures

    Harrer, O.-K., Wallner, S., Wieser, V. & Sommitsch, C., 2006, In: Steel grips : journal of steel and related materials. 4, p. 356-360

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Recrystallization behaviour of the nickel based alloy 80A during hot forming

    Mitsche, S., Sommitsch, C., Pölt, P. & Kleber, S., 2006, Proceedings of the 13th Conference and Workshop on Electron Backscatter Diffraction, Royal Microscopical Society (RMS). p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Risiken erkannt - kein Geld verbrannt

    Stefan, W. & Buchmayr, B., 2006, In: Qualität und Zuverlässigkeit : QZ. 51, p. 29-32

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Simulation der Gefügeentwicklung beim Stabwalzen von Rippenstahl

    Sommitsch, C., Fohringer, H., Jahn, A., Stöckl, C. & Buchmayr, B., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 344-349

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Simulation der Temperatur- und Gefügeentwicklung beim Stabwalzen von BSt 550

    Sommitsch, C. & Buchmayr, B., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Systematische Bestimmung des rekristallisierten Gefügeanteiles einer Nickelbasislegierung in Abhängigkeit vom Verformungsgrad

    Mitsche, S., Sommitsch, C. & Poelt, P., 2006, Sonderbände der praktischen Metallographie. p. 43-50

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. Published

    Über das Langschmieden einer Nickelbasislegierung mit unterschiedlichen Ausgangstemperaturen

    Wallner, S., Harrer, O.-K. & Wieser, V., 2006, XXV. Verformungskundliches Kolloquium. p. 157-166

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Variation of the precipitation mechanisms for high pressure die casting alloy AlSi9Cu3(Fe)

    Geier, G. F., Rockenschaub, H., Pabel, T. & Hopfinger, M., 2006, In: International foundry research = Giessereiforschung. p. 32-48

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Vorhersage und Minimierung des Innenfehlerbereichs beim Block-auf-Block Strangpressen

    Hatzenbichler, T., 2006, 178 p.

    Research output: Thesis › Doctoral Thesis

  44. Published

    XXV. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor), 2006, Leoben, Österreich: Montanuniversität Leoben, Lehrstuhl für Umformtechnik.

    Research output: Book/Report › Anthology › Research

  45. 2005
  46. Published

    12. Bericht zum Projekt "Vorhersage und Minimierung des Innenfehlerbereichs beim Block-auf-Block-Strangpressen"

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    13. Bericht zum Projekt "Vorhersage und Minimierung des Innenfehlerbereichs beim Block-auf-Block-Strangpressen"

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Abschlussbericht Projekt MCL M7 "Optimierung der Umformbedingungen beim Langschmieden von Nickelbasislegierungen"

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Analyse und Verbesserung des bestehenden FEM Modells

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Analysis of microstructural properties of in 718 after high speed forging

    Renhof, L., Krempaszky, C., Werner, E. & Stockinger, M., 2005, p. 261-270. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  51. Published

    Beschleunigung der Auslagerungsvorgänge der Druckgusslegierung AlSi9Cu3(Fe) bei gleichzeitiger Erhöhung der statischen mechanischen Eigenschaften (Teil 1)

    Rockenschaub, H., Pabel, T., Geier, G. F. & Hopfinger, M., 2005, In: Druckguss-Praxis. p. 95-104

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Beschleunigung der Auslagerungsvorgänge der Druckgusslegierung AlSi9Cu3(Fe) bei gleichzeitiger Erhöhung der statischen mechanischen Eigenschaften (Teil 2)“

    Pabel, T., Rockenschaub, H., Geier, G. F., Hopfinger, M. & Kothleitner, G., 2005, In: Druckguss-Praxis. p. 137-146

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Bestimmung der Reibzahl mittels Ringstauchversuch

    Hatzenbichler, T., Buchmayr, B., Hochmann, H., Fössl, T. & Zink, A., 2005, Sommerschule Steiermark. p. 161-170

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Blechprüfung

    Sommitsch, C. & Buchmayr, B., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Comparison of fracture criteria at high temperatures for nickel-based alloys

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, Steelsim 2005. p. 575-588

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Development of microstructure in forging alloy 718

    Harrer, O.-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, Steelsim 2005. p. 463-471

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Ductile fracture analysis with damage models of effective stresses at high temperatures

    Sommitsch, C. & Rüf, G., 2005, 8th ICTP 2005. p. 327-328

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

    Sommitsch, C., Poelt, P., Mitsche, S. & Walter, M., 2005, Sommerschule Steiermark. p. 113-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Einfluss der Rezipientenreibung auf die Prozessparameter beim direkten Strangpressen

    Hatzenbichler, T., Buchmayr, B. & Umgeher, A., 2005, XXIV. Verformungskundliches Kolloquium. p. 53-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Entwicklung eines Warmstauchversuchs als Grundlage für die Beschreibung des Schädigungsverhaltens einer Nickel-Basis-Superlegierung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, XXIV. Verformungskundliches Kolloquium. p. 139-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    "Feinabstimmung des Teilmodells" Projekt MCL M8

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Finite Elemente Berechnung eines Langschmiedeprozesses

    Wallner, S., Harrer, O.-K. & Wieser, V., 2005, XXIV. Verformungskundliches Kolloquium. p. 157-165

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Gefügemodelle für die Warmformgebung

    Sommitsch, C. & Buchmayr, B., 2005, Freiberger Forschungsforum, 56. Berg- und Hüttenmännischer Tag. p. 16-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Gesenkschmieden von Portalachsen - Simulation und praktische Erfahrung

    Hein, G., Kollingbaum, M., Hatzenbichler, T. & Wollendorfer, G., 2005, XXIV. Verformungskundliches Kolloquium. p. 193-194

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Gesenkschmiedetechnik - eine systemanalytische Betrachtung

    Buchmayr, B., 2005, Sommerschule Schmiedetechnik. p. 7-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Goals, Recent developments and critical issues in modelling of hot rolling, forging, heat treatment and prediction of material properties

    Buchmayr, B., 2005, Steelsim 2005. p. 2-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Influence of container friction on the main process parameters in direct extrusion

    Hatzenbichler, T., Buchmayr, B. & Umgeher, A., 2005, In: Steel grips : journal of steel and related materials. 3, p. 126-129

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Influence of TRIP on the residual stress development during heat treatment of high alloyed cast irons

    Raberger, R., Buchmayr, B. & Brandner, M., 2005, IDE200, Internationale Konferenz, Distortion Engineering. p. 365-371

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Measurement of marcoscopic residual stress and resulting distortion during machining

    Krempaszky, C., Werner, E. A. & Stockinger, M., 2005, Materials Science and Technology 2005 - Proceedings of the Conference. p. 109-118 10 p. (Materials Science and Technology; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Methods of controlling the cross-section in rolling mills for long products

    Harrer, O.-K., Hatzenbichler, T., Kostúr, K., Pástor, M. & Truchlý, M., 2005, In: Steel grips : journal of steel and related materials. 3, p. 375-379

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Microstructure Simulation in Radial Forging of Nickel Base Alloys

    Harrer, O.-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, The 8th ESAFORM Conference on Material Forming. p. 515-518

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Numerical simulation of forging alloy 718

    Harrer, O.-K., Wallner, S. & Wieser, V., 2005, 8th ICTP 2005. p. 325-326

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    On the determination of the recrystallised fraction during hot forming

    Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, In: Steel grips : journal of steel and related materials. 3, p. 287-293

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Optimisation of complex heating furnace - hot rolling mill by simulation system

    Kostúr, K., Harrer, O.-K. (Editor), Pástor, M. & Truchlý, M., 2005, Kosice.

    Research output: Book/Report › Scholarly edition

  75. Published

    Optimized rod rolling to achieve desired mechanical properties

    Sommitsch, C., Roveda, M., Gaudenzi, N. & Buchmayr, B., 2005, Steelsim 2005. p. 407-419

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Optimizing the forging of critical aircraft parts by the use of finite element coupled microstructure modeling

    Stockinger, M. & Tockner, J., 2005, p. 87-95. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  77. Published

    Projektbericht "Input data for the numerical simulation" Projekt P056-01-07

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    Projektbericht "Simulation of Radial Forging" Projekt P056-01-07

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Projektbericht "Stand der Simulation des Walzprozesses" Projekt MCL M8, Oktober 2005,

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Projektbericht "Stand der Simulation des Walzprozesses" Projekt MCL M8, September 2005

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Projektbericht zu "Stand der Simulation des Walzprozesses" Projekt MCL M8, Dezember 2005,

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Projektstatus Projekt MCL M8

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  83. Published

    Quartalsbericht 01/2005 Projekt MCL M6 "Modellierung der Werkstoffschädigung während der Warmumformung"

    Rüf, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Quartalsbericht 01/2005 Projekt MCL M7 "Optimierung der Umformbedingungen beim Langschmieden von Nickelbasislegierungen"

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Quartalsbericht 02/2005 Projekt MCL M6 "Modellierung der Werkstoffschädigung während der Warmumformung"

    Rüf, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  86. Published

    Quartalsbericht 02/2005 Projekt MCL M7 "Optimierung der Umformbedingungen beim Langschmieden von Nickelbasislegierungen"

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Quartalsbericht 03/2005 Projekt MCL M6 "Modellierung der Werkstoffschädigung während der Warmumformung"

    Rüf, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    Quartalsbericht 03/2005 Projekt MCL M7 Optimierung der Umformbedingungen beim Langsschmieden von Nickelbasislegierungen

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    Quartalsbericht 04/2004 Projekt MCL M6 "Modellierung der Werkstoffschädigung während der Warmumformung"

    Rüf, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    Quartalsbericht 04/2004 Projekt MCL M7 "Optimierung der Umformbedingungen beim Langschmieden von Nickelbasislegierungen"

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Report III on the simulation of ORI MARTIN rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Report II on the simulation of ORI MARTIN rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Report IV on the simulation of ORI MARTIN rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Report on the simulation of ORI configuration rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. Published

    Residual stresses in IN 718 turbine disks

    Krempaszky, C., Werner, E. A. & Stockinger, M., 2005, p. 527-538. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  96. Published

    Simulation des Reckschmiedens - ein Erfahrungsbericht

    Harrer, O.-K., Wallner, S. & Wieser, V., 2005, Sommerschule Steiermark. p. 127-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Sommerschule Schmiedetechnik

    Buchmayr, B. (Editor), 2005, Leoben: Lehrstuhl für Umformtechnik. Bruno Buchmayr.

    Research output: Book/Report › Anthology › Research

  98. Published

    Spray forming and post processing of superalloy rings

    Walter, M., Stockinger, M., Tockner, J., Ellendt, N. & Uhlenwinkel, V., 2005, p. 429-440. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  99. Published

    The mathematical modelling of furnace for effeciency optimisation with rolling mill

    Pástor, M., Kostur, K., Harrer, O.-K. & Truchlý, M., 2005, In: Acta metallurgica Slovaca. p. 265-270

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Über die Bestimmung des rekristallisierten Anteils bei Warmumformung

    Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, XXIV. Verformungskundliches Kolloquium. p. 113-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Versuche zur Ermittlung von Eingabeparametern für die numerische Simulation

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  102. Published

    Werkstoff-Verformbarkeit in Blechumformprozessen unter Berücksichtigung der Umformhistorie

    Ofenheimer, A., Buchmayr, B. & Cerjak, H., 2005, XXIV. Verformungskundliches Kolloquium. p. 21-29

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...3 4 5 6 7 8 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben