Chair of Metal Forming (560)

Organisational unit: Chair

551 - 600 out of 731Page size: 50

Research output

  1. 2007
  2. Published

    Modelling of creep fatigue in containers during aluminium and copper extrusion

    Sommitsch, C., Sievert, R., Wlanis, T., Günther, B. & Wieser, V., 2007, In: Computational materials science. 39, p. 55-64

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Oils for Internal Thread Molding Description of a Test-Methodology

    Monetti, C., Buchner, B., Schiester, I., Tonnerer, F. & Hering, G., 2007, XXVI. Verformungskundliches Kolloquium. p. 243-254

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    ON MODELLING THE LOCAL DAMAGE EVOLUTION IN HOT WORK TOOL STEELS

    Krumphals, F., 2007

    Research output: Thesis › Diploma Thesis

  5. Published

    On the interaction of ductile damage and materials softening of a Ni-base alloy during hot deformation

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1146-1155

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    On the retained strain during multipass hot deformation for the austenitic stainless steel 304 L

    Candic, M., Tian, B., Kleber, S., Wießner, M. & Sommitsch, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Optical Surface Analysis of Steel during Hot Compression: A Test to Determine Crack Initiation

    Pschera, R., Winter, G. & Sommitsch, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Preform Optimization in Die Forging with Standardized Design Feature

    Zhuang, Y., 2007

    Research output: Thesis › Diploma Thesis

  9. Published

    Projektendbericht Dezember 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Projektendpräsentation September 2007 zum Projekt NK021-05

    Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Projektpräsentation Oktober 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Projektstatus April 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Projektstatus Dezember 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Projektstatus Februar 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Projektstatus Jänner 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Projektstatus Juli 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Projektstatus Mai 2007 Diplomarbeit Wallner Stefan zum Projekt: P056-01-14

    Wallner, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Projektstatus März 2007 Diplomarbeit Wallner Stefan zum Projekt: P056-01-14

    Wallner, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Recrystallization behaviour of the nickel-based alloy 80 A during hot forming

    Mitsche, S., Poelt, P. & Sommitsch, C., 2007, In: Journal of microscopy. 227, p. 267-274

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Scheil-Gulliver simulation with partial redistribution of fast diffusers and simultaneous solid-solid phase transformations

    Buchmayr, B., Kozeschnik, E. & Rindler, W., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 826-831

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Schmelzen von Magnesium - Optimierung der Strömungsverhältnisse in einem Magnesiumofen

    Rockenschaub, H., Pabel, T., Sigmund, A., Wohlmuth, P. & Schumacher, P., 2007

    Research output: Non-textual form › Web publication/site › Research

  22. Published

    Simulation der Umformung und Schädigung bei Massivumformung

    Buchmayr, B., 2007, 6. Industriekolloquium "Hochfeste Strukturen" an der TU Clausthal/Zellerfeld. p. 125-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Starke Präsentationen rund um das Thema Schmelze und Schmelzen - Rückblick GIFA 2007

    Geier, G. & Pabel, T., 2007, In: Giesserei-Praxis. p. 381-395

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Umformtechnische Lösungen für den Bau leichter Karosserien

    Buchmayr, B., 2007, XXVI. Verformungskundliches Kolloquium. p. 189-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Verbesserte Leistungsfähigkeit von walzplattierten Aluminium-Stahl-Werkstoffen

    Buchner, M., Buchmayr, B., Bichler, C. & Riemelmoser, F., 2007, Neue Wege zum wirtschaftlichen Leichtbau. p. 267-281

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    X-Ray computed tomography – Potenials, expectations and limits in practical application

    Schindelbacher, G., Pabel, T. & Geier, G., 2007, In: Casting plant and technology international. p. 34-41

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    XXVI. Verformungskundlichen Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2007, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  28. 2006
  29. Published

    Quantitative analysis of the microstructure of near β titanium alloy during compression tests

    Warchomicka, F., Stockinger, M. & Degischer, H. P., 3 Jul 2006, In: Journal of materials processing technology. 177, 1-3, p. 473-477 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Aluminium- und Zinkdruckguss für höchste Ansprüche

    Pabel, T. & Rockenschaub, H., 2006, In: Druckguss-Praxis. p. 109-111

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Bestimmung der Haftfestigkeit von Aluminium-Stahl-Verbunden

    Buchner, M., Buchmayr, B. & Bichler, C., 2006, XXV. Verformungskundliches Kolloquium. p. 205-213

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Bestimmung der Reibzahl unter Schmiedebedingungen mithilfe des Rotationsreibversuches

    Buchner, B., Markut, K. & Buchmayr, B., 2006, XXV. Verformungskundliches Kolloquium. p. 101-117

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Bestimmung von Materialparametern für poröse Werkstoffe

    Hatzenbichler, T., Planitzer, F., Buchmayr, B., Köppl, R. & Ecker, W., 2006, XXV. Verformungskundliches Kolloquium. p. 239-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Charakterisierung unterschiedlicher Schmierstoffe hinsichtlich des Reibzahlverlaufs beim Schmieden einer Aluminiumlegierung

    Maderthoner, G., 2006

    Research output: Thesis › Diploma Thesis

  35. Published

    Creep fatigue in extrusion dies - modelling and simulation

    Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Wieser, V., 2006, In: Steel grips : journal of steel and related materials. 4, p. 51-55

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Creep fatigue of multi-part container during hot extrusion of copper - simulation and experimental comparison

    Wlanis, T., Krumphals, F., Sommitsch, C. & Wieser, V., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Design and Commissioning of a Rotational Forging Tribometer

    Markut, K. C., 2006

    Research output: Thesis › Diploma Thesis

  38. Published

    Determination of Material Parameters for porous Materials

    Hatzenbichler, T., Planitzer, F., Buchmayr, B., Köppl, R. & Ecker, W., 2006, ESAFORM 2006. p. 155-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Die hoch hinaus wollen

    Sommitsch, C., 2006, In: Wirtschafts-Blatt : Österreichs unabhängige Tageszeitung für Wirtschaft & Finanzen. p. 10-11

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Druckguss als Basis für Innovationen Teil 2

    Rockenschaub, H. & Pabel, T., 2006, In: Druckguss-Praxis. p. 143-184

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Druckguss - Basis für Innovationen Teil 1

    Rockenschaub, H. & Pabel, T., 2006, In: Druckguss-Praxis. p. 97-109

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Dynamic recrystallization of NI-base alloys-Experimental results and comparisons with simulations

    Poelt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 306-314

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Einflussgrößen auf die mechanisch-technologischen Eigenschaften von Schmiedeteilen aus AFP-Stählen

    Lehofer, H., Gelder, S., Taschauer, M. & Buchmayr, B., 2006, XXV. Verformungskundliches Kolloquium. p. 63-71

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Ein Stoff für alle Härtefälle

    Harlfinger, J. & Sommitsch, C., 2006, In: Der Standard : Österreichs unabhängige Tageszeitung für Wirtschaft, Politik und Kultur. p. 9-9

    Research output: Contribution to journal › Article › Transfer › peer-review

  45. Published

    Entwicklungszustand und Nutzen der FEM Simulation von Massivumformprozessen

    Hatzenbichler, T., Harrer, O.-K. & Buchmayr, B., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 469-474

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Entwicklung von walzplattierten Aluminium-Stahl Verbunden für die Umformung in der Automobilindustrie

    Bichler, C., Brandecker, M., Buchner, M. & Buchmayr, B., 2006, 4. Ranshofener Leichtmetalltage. p. 233-249

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Erhöhte mechanische Eigenschaften der Druckgusslegierung AlSi9Cu3(Fe) durch optimierte Ausscheidungsverteilung infolge Kombination von Kalt- und Waremauslagerung

    Pabel, T., Rockenschaub, H., Geier, G. F. & Hopfinger, M., 2006, In: Gießerei-Rundschau. p. 175-185

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Feature extraction from micrographs of forged nickel based alloy

    Rinnhofer, A., Benesova, W., Jakob, G. & Stockinger, M., 2006, Proceedings - 18th International Conference on Pattern Recognition, ICPR 2006. p. 391-394 4 p. 1699227. (Proceedings - International Conference on Pattern Recognition; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Gesamtüberblick über das MCL Projekt M8, Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Influence of alloying, forming and cooling on the mechanical properties of direct air cooled medium carbon low alloy steels

    Lehofer, H., Gelder, S., Taschauer, M. & Buchmayr, B., 2006, In: Steel grips : journal of steel and related materials. 4, p. 290-294

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Investigation and numerical modelling of extrusion tool life time

    Redl, C., Wieser, V., Sommitsch, C., Wlanis, T., Schützenhöfer, W., Gaudin, S. & Geigges, B., 2006, Proceedings of 7th International Tooling Conference, M. Rosso, M. A. Grande, D. Uguespp (Eds.),. p. 589-596

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Investigations on fracture of a Ni-base alloy at elevated temperatures by continuum damage mechanics

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, Proceedings of the 9th International Conference on Material Forming, ESAFORM. p. 175-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...8 9 10 11 12 13 14 15 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben