Chair of Mechanical Engineering (140)

Organisational unit: Chair

601 - 700 out of 1,376Page size: 100

Research output

  1. 2015
  2. Published

    Local fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by simulation

    Simunek, D., Leitner, M. & Stoschka, M., 2015.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Overview of residual stress measurement and fatigue test data for Pneumatic Impact Treated (PIT) joints

    Schäfers, F., Gerster, P. & Leitner, M., 2015.

    Research output: Contribution to conference › Paper

  4. Published

    Technische Polymere für Tribo-Anwendungen Möglichkeiten und Herausforderungen

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Tribological in-situ evaluation of lubricated contacts of real-life engineering materials

    Grün, F., Godor, I., Summer, F., Bergmann, P. & Moder, J., 2015, Proceedings of 3rd OilDoc Conference and Exhibition. Rosenheim

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Tribologie im Motorenbau

    Grün, F., 2015, Neue Technologien und Innovationen in der Fahrzeugtechnik XII - Proceedings. Steyr

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Yield stress evolution in Inconel 718 samples under standard heat treatment process conditions of turbine disks

    Drexler, A., Maderbacher, H., Povodon-Karadeniz, E., Gänser, H. P., Ecker, W., Oberwinkler, B. & Fischersworring-Bunk, A., 2015, European Conference on Heat Treatment 2015 and 22nd IFHTSE Congress - Heat Treatment and Surface Engineering from Tradition to Innovation. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. 2014
  9. E-pub ahead of print

    Ermüdungsfestigkeit hochfester Stahlschweißverbindungen: Fatigue Strength of High-strength Welded Steel Joints

    Leitner, M., Stoschka, M., Ottersböck, M. & Simunek, D., 13 Dec 2014, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 1, p. 9-14 6 p.

    Research output: Contribution to journal › Article › Research

  10. E-pub ahead of print

    Einfluss der lokalen Gefügeausbildung auf die Schwingfestigkeit von Gusseisen mit Kugelgraphit

    Kainzinger, P., Wohlfahrt, M. & Grün, F., 6 Dec 2014, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 1, p. 2-8 7 p.

    Research output: Contribution to journal › Article › Research

  11. Published

    Tribological modeltesting in powertrains

    Grün, F., Godor, I. & Krampl, H., 7 Nov 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Auslegung von Bauteilen mit "realen" Werkstoffen

    Kainzinger, P., Grün, F., Redik, S. & Mösenbacher, A., 24 Oct 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Fatigue strength assessment according to the FKM-guideline in case of non-proportional stresses

    Leitner, B., Fiedler, A. G. & Leitner, M., 1 Sept 2014, In: Konstruktion. 66, 9, p. 76-82 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Mean Stress Sensitivity of Ductile Iron with respect to Technological and Statistical Size Effect Considerung Defects

    Kainzinger, P. & Grün, F., 13 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  15. Published

    Mechanisms of fatigue-crack initiation and their impact on fatigue life of AlSi7 die-cast-components

    Redik, S., Tauscher, M. & Grün, F., 13 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  16. Published

    A study on the fatigue crack initiation point of longitudinal attachments

    Ottersböck, M., Leitner, M. & Stoschka, M., 17 Mar 2014.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Assessment of the effect of tensile Overloads on the Fatigue Behaviour of quenched and tempered Steel

    Garb, C., Strohhaüssl, B., Winter, G. & Grün, F., 1 Jan 2014, 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings. p. 30-31 2 p. (31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Aktuelle Aktivitäten zu den Europäischen Rohstoffinitiativen

    Maier, A., Moser, P., Eichlseder, W., Mühlburger, M., Brugger, K., Antrekowitsch, H. & Hoscher, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 143-148

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Assessment of the effect of tensile overloads on the fatigue behaviour of quenched and tempered steel

    Garb, C., Grün, F., Winter, G. & Strohhäussl, B., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Aufbau einer numerischen Simulationskette zur betriebsfesten Bewertung hochfrequent gehämmerter Schweißverbindungen

    Simunek, D., 2014, 102 p.

    Research output: Thesis › Diploma Thesis

  21. Published

    Ausgewählte Einflüsse auf das Rissfortschrittsverhalten am Beispiel zweier AlSi-Gusslegierungen

    Lamik, A., 2014

    Research output: Thesis › Diploma Thesis

  22. Published

    Auswirkungen verschiedener Lastinteraktionen auf das Lebensdauerverhalten eines Vergütungsstahls

    Garb, C., 2014, 113 p.

    Research output: Thesis › Diploma Thesis

  23. Published

    Bauteilversuche an Getriebedeckeln - Zwischenbericht

    Maderbacher, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Bericht_WP1_Materialdefinition

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Bericht_WP2_Definition_Prüfmatrix

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Bericht_WP3_Definition Probekoerpergeometrie

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Bericht_WP4_Herstellung Prüfkörper mittels Spritzgießen

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Bericht_WP5_Konzipierung geeigneter Einspannung für Torsionsproben

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Bericht_WP5_Literaturrecherche_und_Aufbereitung_bereits_vorhandener_Materialdatensaetze

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Bericht_WP6_Durchführung von quasistatischen und zyklischen Referenzversuchen

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Bewertung der Betriebsfestigkeit von Schweißnähten basierend auf einer Schweißstruktursimulation

    Ottersböck, M., Maier, B. & Stoschka, M., 2014, Tagungsband „Simulationsforum Schweißen und Wärmebehandlung 2013“. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Bewertung des Einflusses von Defekten auf die Schwingfestigkeit von Gusseisen mit Kugelgraphit

    Kainzinger, P., Guster, C., Severing, M. & Ballmes, H., 2014, DVM-Bericht 1681. p. 19-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Bewertung von Mischreibungsvorgängen in kontraformen Kontakten

    Moder, J., 2014

    Research output: Thesis › Diploma Thesis

  34. Published

    Charakterisierung der Schwingfestigkeit einer Al-Thixogusslegierung

    Mösenbacher, A., Tan, W. & Guster, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Charakterisierung von Quellung und Medieneinfluss zur Lebensdauerbewertung von kurzglasfaserverstärkten Polyamiden

    Haslinger, T., 2014, 111 p.

    Research output: Thesis › Diploma Thesis

  36. Published

    Comparison of microstructural crack paths between hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys in high plasticity regimes under rotating bending

    Huter, P., Winter, G., Renhart, P., Schwab, M., Oberfrank, S., Grün, F. & Stauder, B., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 618, p. 578-585

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Contact fatigue life investigations and wear mechanisms of gears with different steels and hardening process

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2620-2623 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Contribution towards fatigue strength of thermo-mechanically processed metallic components

    Stoschka, M., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  39. Published

    Development of a design and optimization method for high pressure components

    Müther, A., Maier, B., Godor, I., Christiner, T., Stühlinger, R. & Trieb, F., 2014, In: Design of Machines and Structures. 4, p. 33-43

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Efficient material development for elastomeric sealing materials via the correlation between tribological model tests and component testing

    Hausberger, A., Godor, I. & Grün, F., 2014, Book of Abstracts of Asiatrib 2014. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Endbericht FFG2116580 TMF-Alu

    Huter, P., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Entwicklung einer Auslegungs- und Optimierungsmethode für Hochdruckbauteile

    Müther, A., 2014, 118 p.

    Research output: Thesis › Diploma Thesis

  43. Published

    Entwicklung eines Referenzbauteils zur Prüfung von dickwandigen Großgussbauteilen

    Auer, M., 2014, 103 p.

    Research output: Thesis › Diploma Thesis

  44. Published

    Evaluation of the residual stress distribution in thin films by means of the ion beam layer removal method

    Kozic, D., Treml, R., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014. Zhang, G. Q., Van Driel, W. D., Rodgers, P., Bailey, C. & de Saint Leger, O. (eds.). Institute of Electrical and Electronics Engineers, 6813785

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Fatigue design methodology of reinforced engineering thermoplastics

    Maier, J., Mösenbacher, A. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  46. Published

    Fatigue enhancement of thin-walled high-strength steel joints by high frequency mechanical impact treatment

    Leitner, M., Stoschka, M. & Eichlseder, W., 2014, In: Welding in the world. 58, p. 29-39

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Fitness-for-Purpose and Damage Tolerance: Applications in Transportation and Energy Systems

    Gänser, H.-P., Tichy, R., Maierhofer, J., Horn, A. & Maier, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 375-379

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    FKM-konformer Ermüdungsfestigkeitsnachweis bei nichtproportionalen Beanspruchungen

    Leitner, B., Fiedler, M. & Leitner, M., 2014, In: Konstruktion. 09, p. 76-82

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Forschungsgruppe „Betriebsfestigkeit – Technologische Prozesse“

    Leitner, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Fundamental Influences on Quasistatic and Cyclic Material Behavior of Short Glass Fiber Reinforced Polyamide Illustrated on Microscopic Scale

    Brunbauer, J., Pinter, G., Mösenbacher, A. & Guster, C., 2014, In: Journal of Applied Polymer Science. 131, p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Grundlagenversuche mit Proben aus AlSi9Cu3 Lenkgehäusen

    Maderbacher, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Integration of Phase-Dependent Work-Hardening into Transient Weld Simulation

    Stoschka, M., Ottersböck, M. & Leitner, M., 2014, Proceedings of the Ninth International Conference on Engineering Computational Technology. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Jahresendbericht_2014

    Primetzhofer, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  54. Published

    Lebensdauerberechnung an einer Tragschiene aus kurzfaserverstärktem Polyamid

    Mösenbacher, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  55. Published

    Leichtbau durch Ausschöpfung des vollen Werkstoffpotentials

    Kainzinger, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Leichtbau durch optimale Ausnutzung des Werkstoffs am Beispiel von Gusseisen mit Kugelgraphit

    Kainzinger, P. & Grün, F., 2014, In: Gießerei-Rundschau. 61, p. 347-352

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Leichtbau durch optimale Ausnutzung des Werkstoffs am Beispiel von Gusseisen mit Kugelgraphit

    Kainzinger, P. & Grün, F., 2014, Gießen als Innovatsionsträger bei der Bauteilentwicklung: Material- und Energieeffizienz. p. 27-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Local Fatigue Assessment of Welded and High Frequency Mechanical Impact-Treated Joints based on Manufacturing Process Simulation

    Leitner, M., Simunek, D. & Stoschka, M., 2014, Proceedings of the Ninth International Conference on Engineering Computational Technology. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  60. Published

    Methodology for Design and Evaluation of highly loaded Hertzian Contacts

    Grün, F., Krampl, H., Godor, I. & Trausmuth, A., 2014, Proceedings of 19th International Colloquium Tribology. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Mikrostrukturelle Einflüsse auf das HCF-Ermüdungsverhalten von AlSi-Gusslegierungen

    Redik, S., 2014

    Research output: Thesis › Doctoral Thesis

  62. Published

    Modellentwicklungen zur betriebsfesten Auslegung von Strukturbauteilen aus glasfaserverstärkten Thermoplasten im Motorraum

    Mösenbacher, A., 2014

    Research output: Thesis › Doctoral Thesis

  63. Published

    Modelling and Validation of Fatigue Life Calculation Method for Short Fibre Reinforced Injection Moulded Parts

    Mösenbacher, A., Pichler, P., Guster, C., Pinter, G. & Maier, J., 2014, Proceedings of 16th Conference on Composite Materials. Sevilla

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Modelling of thin film buckling in compound specimens under uniaxial stretching

    Toth, F., Rammerstorfer, F. G., Cordill, M. J. & Fischer, F. D., 2014, Shell Structures: Theory and Applications - Proceedings of the 10th SSTA 2013 Conference. p. 247-250 4 p. (Shell Structures: Theory and Applications - Proceedings of the 10th SSTA 2013 Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Numerical and experimental investigation of non-conformal lubricated contacts

    Moder, J., Krampl, H. & Grün, F., 2014.

    Research output: Contribution to conference › Presentation › Research

  66. Published

    Optimierung des tribologischen Systems Kolbenring-Zylinderlaufbahn von stationären Groß-Gasmotoren

    Schiffer, J., 2014, 155 p.

    Research output: Thesis › Doctoral Thesis

  67. Published

    Optimierung tribologischer Testmethoden für die Dichtungstechnik

    Hausberger, A., Godor, I., Grün, F., Pinter, G. & Schwarz, T., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 17-24

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    P014-14-01 Endbericht Projektjahr 2

    Maier, B., Koch, M. & Apfelknab, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    P014-14-02 Zwischenbericht

    Christiner, T., Wohlfahrt, M. & Maier, B., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Quartalsreviewbericht_Q1-2014

    Primetzhofer, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Quartalsreviewbericht_Q2-2014

    Primetzhofer, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Quartalsreviewbericht_Q3-2014

    Primetzhofer, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Quartalsreviewbericht_Q4-2014

    Primetzhofer, A., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Schweißnahtbewertung auf Basis von Volumsmodellen

    Otto, M., 2014

    Research output: Thesis › Diploma Thesis

  75. Published

    Stellungnahme zur Schadensanalyse "Belag auf beständigem Material"

    Maier, B. & Godor, I., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    Studying interaction between mineral particles by atomic force spectroscopy

    Klima, S., Mirkowska, M., Kratzer, M., Flachberger, H., Teichert, C. & Pondicherry, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Support of the Implementation Process of Constitutive Laws for TMF (rate dependent) with the ANSYS package

    Huter, P., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    TMF and LCF Material and Damage Characterisation of brass, bronze, grey and ductile cast iron

    Huter, P., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Tribological analysis of lubricated non-conforming contacts

    Moder, J., Krampl, H. & Grün, F., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 137-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Tribological Contact Loadings of Sealing Materials

    Hausberger, A., Krampl, H., Godor, I., Grün, F. & Schwarz, T., 2014, Proceedings of 19th International Colloquium Tribology. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Tribological investigations of journal bearings by means of a close to component test methodology

    Bergmann, P., Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Tribologie in Industrie und Forschung. Werkstoffe, Konstruktion und Technologie. Vortragsunterlagen. p. 113-121

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Gódor, I. & Papadimitriou, I., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2155-2158 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Tribometric performance of polymer overlays by contrast with other bearing materials

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Symposium 2014 - Tribologie in Industrie und Forschung. p. 159-166

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Untersuchung der Auswirkung unterschiedlicher Aufpressmittel auf eine Pressverbindung

    Maier, B., Christiner, T. & Wohlfahrt, M., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Untersuchung des Vorspannkraftverlusts dynamisch beanspruchter selbstfurchender Schrauben

    Kainzinger, P., Garb, C. & Godor, I., 2014, VDI Berichte 2239. p. 95-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Verschleiß von Eisengranulat in einem Fließbett

    Maderbacher, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    „Von der Probe zum Bauteil“: Systematische Untersuchung des Betriebsfestigkeitsverhaltens kurzfaserverstärkter Kunststoffe

    Primetzhofer, A., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  88. 2013
  89. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel (R) 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 15 Nov 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Layered Ceramics

    Bermejo, R. & Deluca, M., 1 May 2013, Handbook of Advanced Ceramics: Materials, Applications, Processing, and Properties: Second Edition. Amsterdam: Elsevier, p. 733-751 19 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  91. Published

    Applicability of ring-on-disc and pin-on-plate test methods for Cu-steel and Al-steel systems for large area conformal contacts

    Pondicherry, K. S., Grün, F., Gódor, I., Bertram, R. & Offenbecher, M., Apr 2013, In: Lubrication science. 25, 3, p. 231-247 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Anforderungen an den Leichtbau im Fahrzeug

    Eichlseder, W., 2013, Leichtbau in der Fahrzeugtechnik. p. 119-175

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  93. Published

    Anwendung des lokalen Spannungskonzeptes zur Lebensdauerberechnung von kurzglasfaserverstärkten Spritzgusskomponenten

    Pichler, P., 2013

    Research output: Thesis › Diploma Thesis

  94. Published

    Applicability of Ring-on-Disc and Pin-on-Plate Test Methods for Cu-Steel and Al-Steel Systems for Lare Area Conformal Contacts

    Pondicherry, K., Grün, F., Godor, I., Bertram, R. & Offenbecher, M., 2013, In: Lubrication science. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Assessment of HFMI post-treated joints by the notch stress approach

    Leitner, M., Stoschka, M. & Eichlseder, W., 2013, Proceedings of the 13th International SF2M Spring Meeting. p. 90-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Bauteilnahe Testmethodik für Grenzreibungszustände von Gleitlagerungen

    Bergmann, P., 2013, 110 p.

    Research output: Thesis › Diploma Thesis

  97. Published

    Bauteilprüfungen der Verbindung Kupplungskorn und Zahnrad

    Wohlfahrt, M. & Winter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Beiträge zur Bewertung der Schwingfestigkeit von ausferritischem Gusseisen mit Kugelgraphit

    Wohlfahrt, M., 2013

    Research output: Thesis › Doctoral Thesis

  99. Published

    BERECHNUNGSANSATZ FÜR REIBDAUERERMÜDUNG

    Christiner, T., Reiser, J., Maier, B., Grün, F., Godor, I., Trieb, F., Stühlinger, R. & Herbst, K., 2013, In: Automobiltechnische Zeitschrift : ATZ . 115, 12, p. 1000-1006

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Bewertung der Betriebsfestigkeit von Unterpulverschweißnähten basierend auf einer Schweißstruktursimulation

    Ottersböck, M., 2013, 118 p.

    Research output: Thesis › Diploma Thesis

  101. Published

    Bewertung des Einflusses von Defekten auf die Schwingfestigkeit von Gusseisen mit Kugelgraphit

    Kainzinger, P., Guster, C., Severing, M. & Ballmes, H., 2013, DVM-Bericht 140. p. 209-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Bruchmechanische Charakterisierung der Wärmeeinflusszone einer Schweißnaht eines niederfesten Feinkornbaustahls

    Maier, B. & Guster, C., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  103. Published

    Bruchmechanische Charakterisierung der WEZ einer Schweißnaht eines hochfesten Feinkornbaustahls

    Maier, B. & Guster, C., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...3 4 5 6 7 8 9 10 ...14 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401