Chair of Mechanical Engineering (140)

Organisational unit: Chair

401 - 500 out of 1,376Page size: 100

Research output

  1. 2017
  2. Published

    Impact of Axial Component Alignment in Total Knee Arthroplasty on Lower Limb Rotational Alignment: An in Vitro Study

    Maderbacher, G., Baier, C., Springorum, H. R., Maderbacher, H., Birkenbach, A. M., Benditz, A., Grifka, J. & Keshmiri, A., 1 May 2017, In: Journal of Knee Surgery. 30.2017, 4, p. 372-377 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Spritzgusssimulation als Basis optimierter Bauteile

    Primetzhofer, A., Stadler, G. & Pinter, G. G., 20 Apr 2017.

    Research output: Contribution to conference › Paper

  4. Published

    Spritzgusssimulation als Basis optimierter Bauteile

    Primetzhofer, A., Stadler, G. & Pinter, G. G., 20 Apr 2017.

    Research output: Contribution to conference › Poster › Research

  5. Published

    Residual stress state induced by high frequency mechanical impact treatment in different steel grades – Numerical and experimental study

    Khurshid, M., Leitner, M., Barsoum, Z. & Schneider, C., 1 Apr 2017, In: International Journal of Mechanical Sciences. 123.2017, April, p. 34-42 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Quartalsbericht 01/2017

    Stadler, G., 30 Mar 2017, Polymer Competence Center Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe.

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. E-pub ahead of print

    Application of √area-concept to assess fatigue strength of AlSi7Cu0.5Mg casted components

    Garb, C., Leitner, M. & Grün, F., 15 Mar 2017, (E-pub ahead of print) In: Engineering Fracture Mechanics. 185.2017, November, p. 61-71 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    A first proposal of a new high frequency testing method for high strength steels under tension / compression loading in the VHCF regime

    Milosevic, I., Winter, G., Grun, F. & Kober, M., 2017, VHCF7 - Seventh International Conference on Very High Cycle Fatigue.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    A layer approach to model fatigue strength of surface-hardened components

    Dobberke, D., Wiebesiek, J., Fröschl, J. & Leitner, M., 2017, Proceedings of the Fatigue Design Conference 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Analysis of fatigue notch effect due to axial misalignment for ultra high-strength steel butt joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2017.

    Research output: Contribution to conference › Paper

  11. Published

    Anwendung der numerischen Gusssimulation für Stahlgussbauteile

    Strohmayer, M., 2017

    Research output: Thesis › Master's Thesis

  12. Published

    APPLICATION OF DIFFERENT SIMULATION APPROACHES TO NUMERICALLY OPTIMIZE HIGH FREQUENCY MECHANICAL IMPACT (HFMI) POST-TREATMENT PROCESS

    Ernould, C., Schubnell, J., Simunek, D., Leitner, M., Maciolek, A., Farajian, M. & Stoschka, M., 2017, COMMISSION XIII FATIGUE OF WELDED COMPONENTS AND STRUCTURES XIII-2684-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Berücksichtigung herstellungsbedingter Oberflächenstrukturen auf die Schwingfestigkeit von Motorkomponenten in der virtuellen Bauteilauslegung

    Tauscher, M., 2017

    Research output: Thesis › Diploma Thesis

  14. Published

    Bewertung des Einflusses von Wellen-Oberflächenstrukturen auf das tribologische Verhalten von Gleitlagern

    Pusterhofer, M., 2017

    Research output: Thesis › Master's Thesis

  15. Published

    Damage tolerant fatigue design of seam imperfections in mild steel butt joints by analytical and numerical approaches

    Leitner, M., Remes, H., Murakami, Y. & Stoschka, M., 2017, IIW-Dokument XIII-WG4-158-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Data Ingestion and Analytics in Mining and Tunneling

    Eichlseder, W. & O'Leary, P., 2017, EUMICON Enquete 2017. Wien

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Effect of microporosity and surface condition on fatigue strength of casted aluminum components

    Leitner, M., Garb, C., Aigner, M. & Stoschka, M., 2017, 17th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Effizienz- und Qualitätssteigerungspotentiale der End- und Funktionsprüfung am Beispiel des End-Checks einer Zerkleinerungsmaschine

    Walus, P., 2017

    Research output: Thesis › Master's Thesis

  19. Published

    Einbindung der simulation in die entwicklung eines staubbeladenen verbrennungsreaktors hinsichtlich brenner und reaktordesign

    Edler, F., Geier, B., Reiter, W., Rieger, J., Spijker, C. & Raupenstrauch, H., 2017, In: VDI-Berichte. 2017, 2302, p. 729-734 6 p.

    Research output: Contribution to journal › Conference article › peer-review

  20. Published

    Ermüdungsfestigkeitsbewertung ultrahochfester Schweißverbindungen bei variabler Betriebsbeanspruchung

    Pußwald, S., 2017

    Research output: Thesis › Master's Thesis

  21. Published

    Fatigue strength of welded and HFMI-treated steel joints under constant and variable amplitude loading

    Leitner, M., Ottersböck, M., Pußwald, S. & Remes, H., 2017, IIW-Dokument XIII-2691-17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Fatigue strength of welded ultra high-strength steel joints incorporating low transformation temperature (LTT) filler material and high frequency mechanical impact (HFMI) post-treatment

    Leitner, M., Ottersböck, M., Stoschka, M. & Maurer, W., 2017, Proceedings Euromat 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Fretting wear behavior of thermoplastic polyurethane (TPU)

    Wang, C., Hausberger, A., Pinter, G. G., Grun, F. & Schwarz, T., 2017, Proceedings WTC 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    In-situ Testing of Wear and Fatigue on Gear Segments

    Grun, F., Koblmiller, T., Gódor, I. & Schadler, W., 2017, Proceedings of the 6th World Tribology Congress. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Lebensdaueranalyse von Strukturbauteilen aus kurzkohlenstofffaserverstärktem Polyphthalamid im Motorraum

    Koblmiller, T., 2017

    Research output: Thesis › Master's Thesis

  26. Published

    Leichtbau in der Fahrzeugtechnik: ATZ/MTZ-Fachbuch

    Friedrich, H. E. (Editor) & Eichlseder, W., 2017, 2. Auflage ed. Wiesbaden: Springer Vieweg. 844 p.

    Research output: Book/Report › Book › Research

  27. Published

    Local fatigue strength assessment of induction hardened components based on numerical manufacturing process simulation

    Leitner, M., Aigner, R. & Dobberke, D., 2017, Proceedings of the Fatigue Design Conference 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Mathematische brennermodellierung zur reduktion der stickoxidemissionen mittels flamelet – nox postprozessor in OpenFOAM

    Pollhammer, W., Spijker, C., Koller, M. & Raupenstrauch, H., 2017, In: VDI-Berichte. 2017, 2302, p. 573-583 11 p.

    Research output: Contribution to journal › Conference article › peer-review

  29. Published

    Methodenentwicklung zur Bewertung von großflächigen Aluminium-Stahl-Kontakten

    Apfelknab, C., 2017

    Research output: Thesis › Diploma Thesis

  30. Published

    Novel Gear Test Methodology to evaluate efficiency and durability

    Grun, F., Maier, B., Gódor, I. & Steinwender, F., 2017, Proceedings of the 6th European COnference on TRIBology. 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Numerical and analytical studies of a shaker test system for fatigue testing

    Renhart, P., Milosevic, I. & Grun, F., 2017, DAS 34 - Proceedings. 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Numerische Bewertung der Schwingfestigkeit geschraubter Blechbauteile

    Pöllinger, R., 2017

    Research output: Thesis › Master's Thesis

  33. Published

    Numerische und analytische Untersuchungen eines Shaker- Prüfsystems zur Ermüdungsprüfung

    Renhart, P., Milosevic, I., Himmelbauer, F. & Grun, F., 2017, Fortschritte in der Werkstoffprüfung für Forschung und Praxis: Prüftechnik - Kennwertermittlung - Schadensvermeidung. p. 91-96 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Optimierter Auslegungsprozess von Drosselklappen für große Druckrohrleitungen durch parametrisierte Modellerstellung

    Leitner, N. M., 2017

    Research output: Thesis › Master's Thesis

  35. Published

    Randschichteffekte bei der Ermüdungsfestigkeitsbewertung von Aluminiumgussbauteilen

    Pomberger, S., 2017

    Research output: Thesis › Master's Thesis

  36. Published

    Schwingfestigkeit geschweißter Strukturen unter Berücksichtigung lokaler Gefügeeigenschaften der Wärmeeinflusszone

    Maier, B., 2017

    Research output: Thesis › Doctoral Thesis

  37. Published

    Stabilität von Eigenspannungen kugelgestrahlter Pleuel unter zyklischer Beanspruchung

    Liebfahrt, L., 2017

    Research output: Thesis › Master's Thesis

  38. Published

    Thermodynamic modelling of irreversible processes

    Svoboda, J., Fischer, F. D. & Kozeschnik, E., 2017, European Mineralogical Union and Mineralogical Society of Great Britain and Ireland. Vol. 16. p. 181-214 34 p. (EMU notes in mineralogy).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Tribologische Kontaktsimulation elastomerer Dichtungswerkstoffe

    Hausberger, A., Krampl, H., Grün, F., Gódor, I., Pinter, G. G. & Schwarz, T., 2017, In: Tribologie und Schmierungstechnik. 64.2017, 1, p. 15-24 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Umlaufbiege-Verhalten eines Maraging-Stahls

    Höfferer, P., 2017

    Research output: Thesis › Diploma Thesis

  41. Published

    Untersuchung der lokalen Reibungsmechanismen von Polymer-Glas kontakten mittels in-situ Tribologie

    Stiller, T., Hausberger, A., Wang, C., Pinter, G. G., Gódor, I., Grun, F. & Schwarz, T., 2017, ÖTG 2017 Tagungsband. 2017, p. 55 68 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Wear and fatigue resistance of mild steel components reinforced by arc welded hard layers

    Leitner, M., Pichler, P., Steinwender, F. & Guster, C., 2017, In: Surface & coatings technology. 330.2017, 1 December, p. 140-148 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    WPR-V-3.02-07_TorsionUndMultiaxialeBelastung

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  44. Published

    WPR-V-3.02-08_LCF-Versuche

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  45. Published

    WPR-V-3.02-10_Lebensdauerberechnung am Bauteil und Validierung durch Bauteilversuche

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  46. Published

    WPR-V-3.02-11_Optimierung Simulationskette

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  47. Published

    WPR-V-3.02-12_Materialgenerator

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  48. Published

    WPR-V-3.05-02_Entwicklung_Prüfstrategie_Probendefinition_und_Referenzversuche

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  49. Published

    WPR-V-3.05-03_Stuetzwirkungsverhalten_in_Kombination_mit_Temperatur

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  50. Published

    WPR-V-3.05-04_Orientierungseinfluss und Bindenaht

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  51. Published

    WPR-V-3.05-05_Einfluss_Umgebungstemperatur_und_Medium

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  52. Published

    WPR-V-3.05-06_Gassnerlinien_variableAmplituden

    Primetzhofer, A. & Pinter, G. G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  53. 2016
  54. Published

    Jahresendbericht_2016

    Primetzhofer, A., 31 Dec 2016

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  55. Published

    Quartalsreviewbericht_Q4-2016

    Primetzhofer, A., 31 Dec 2016

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  56. Published

    Journal bearing systems: Effect of lubricant viscosity on frictional losses and lifetime performance

    Summer, F., Grün, F., Godor, I., Offenbecher, M., Lainé, E. & Taylor, S., 23 Nov 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  57. Published

    Journal bearing systems: Effect of lubricant viscosity on frictional losses and lifetime performance

    Summer, F., Grün, F., Godor, I., Offenbecher, M., Lainé, E. & Taylor, S., 23 Nov 2016, Conference proceedings of ÖTG Symposium 2016. p. 127-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    SIMULATIVE INVESTIGATIONS OF HIGHLY LOADED CONTACTS CONSIDERING SURFACE ROUGHNESS

    Moder, J. & Grün, F., 23 Nov 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  59. E-pub ahead of print

    CIVIL COMP - Part 2

    Baratta, A., Barros, R. C., Citarella, R., Gentzsch, W., Kruis, J., Sextos, A. G., Stoschka, M., Iványi, P. & Topping, B. H. V., 22 Nov 2016, (E-pub ahead of print) In: Advances in Engineering Software. 101.2016, November, p. 1-2 2 p.

    Research output: Contribution to journal › Editorial › peer-review

  60. Published

    An elastohydrodynamic lubrication model considering surface roughness and mixed friction

    Moder, J., Grün, F. & Godor, I., 13 Oct 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. Published

    Fatigue Design Methodology for Short Fibre Reinforced Polymers Considering Fibre Orientation and Weld Lines

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 12 Oct 2016.

    Research output: Contribution to conference › Paper

  62. Published

    Fatigue Design Methodology for Short Fibre Reinforced Polymers Considering Fibre Orientation and Weld Lines

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 12 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  63. Published

    Herausforderungen und Potentiale bei der Auslegung von kurzfaserverstärkten Spritzgusskomponenten

    Mösenbacher, A. & Grün, F., 11 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  64. Published

    Quartalsreviewbericht_Q3-2016

    Primetzhofer, A., 30 Sept 2016

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  65. Published

    Load sequence effects on fatigue crack growth of high-strength steels by experimental and numerical analysis

    Simunek, D., 28 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  66. Published

    Laboratory Test Methodologies for Journal Slide Bearing Life Time Assessment

    Bergmann, P., Summer, F. & Grün, F., 22 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  67. Published

    Laboratory Test Methodologies for Journal Slide Bearing Life Time Assessment

    Summer, F., Bergmann, P. & Grün, F., 22 Sept 2016, Proceedings of 33rd Danubia-Adria Symposium. Portoroz, Slowenien, p. 106-107

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Laboratory Test Methodologies for Journal Slide Bearing Life Time Assessment

    Summer, F., Bergmann, P. & Grün, F., 22 Sept 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  69. Published

    Parameter Optimization of a Deformation Model for Grey Cast iron

    Strohhäussl, B., Milosevic, I., Winter, G. & Grün, F., 21 Sept 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Parameter Optimization of a Deformation Model for Grey Cast iron

    Strohhäussl, B., 21 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  71. Published

    Parameter Optimization of a Deformation Model for Grey Cast iron

    Strohhäussl, B., Winter, G. & Grün, F., 20 Sept 2016, The 33rd Danubia Adria Symposium: Advances in Experimental Mechanics. p. 50-51 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Fatigue Strength Assessment of AlSi7Cu0.5Mg T6W Castings Supported by Computed Tomography Microporosity Analysis

    Garb, C., Leitner, M. & Grün, F., 17 Sept 2016, In: Procedia Engineering. 160.2016, p. 53-60 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Effect of weld defects on the fatigue strength of ultra high-strength steels

    Ottersböck, M., 7 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  74. Published

    Fatigue Strength Assessment of AlSi7Cu0.5Mg T6W Castings Supported by Computed Tomography Microporosity Analysis

    Garb, C., Leitner, M. & Grün, F., 5 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  75. Published

    Reibung und Verschleiß technischer Kunststoffe "Möglichkeiten und Herausforderungen"

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 1 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  76. Published

    Quality assurance of HFMI-treatment regarding fatigue strength of fillet welds

    Stoschka, M., Leitner, M. (Co-editor) & Ottersböck, M. (Co-editor), 13 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  77. Published

    Thermo-mechanical fatigue influence of copper and silicon on hypo-eutectic Al–Si–Cu and Al–Si–Mg cast alloys used in cylinder heads

    Huter, P., Oberfrank, S., Grün, F. & Stauder, B., Jul 2016, In: International Journal of Fatigue. 88.2016, July, p. 144-155 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Fatigue Strength of a Multiaxial Loaded Short Glass Fibre Reinforced Polyamide

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 30 Jun 2016. 8 p.

    Research output: Contribution to conference › Paper

  79. Published

    Quartalsreviewbericht_Q2-2016

    Primetzhofer, A., 30 Jun 2016

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Fatigue Strenght of a Multiaxial Loaded Short Glass Fibre Reinforced Polyamide

    Primetzhofer, A., Pinter, G. & Mösenbacher, A., 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  81. Published

    Sind mittels laboratorischer Modellprüftechnik erzielte Ergebnisse verwertbar ?

    Grün, F., Godor, I., Moder, J., Bergmann, P. & Summer, F., 11 May 2016, p. 1-43.

    Research output: Contribution to conference › Presentation › Research

  82. Published

    Contact models for mixed friction simulation

    Moder, J. & Grün, F., 21 Apr 2016, MicroCAD: International Multidisciplinary Scientific Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Methodology development for numerical evaluation of wear in tribological contacts

    Moder, J., Bergmann, P., Grün, F. & Godor, I., 21 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  84. Published

    Methodology development for numerical evaluation of wear in tribological contacts

    Bergmann, P., Grün, F., Godor, I. & Herbst, K., 21 Apr 2016, The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference University of Miskolc, 21-22 April, 2016. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    AT516367 (A1) - Prüfstand und Prüfverfahren mit verstellbarem Achsabstand zwischen Übertragungsprüfkörpern

    Grun, F. (Inventor) & Gódor, I. (Inventor), 15 Apr 2016, IPC No. G01M13/02, Patent No. AT516367, 18 Jan 2018, Priority date 18 Sept 2014, Priority No. AT20140050659

    Research output: Patent

  86. Published

    Thermal stability of residual stresses in Ti-6Al-4V components

    Stanojevic, A., Angerer, P. & Oberwinkler, B., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 012007.

    Research output: Contribution to journal › Conference article › peer-review

  87. Published

    Fatigue life prediction method for the practical engineering use taking in account the effect of the overload blocks

    Theil, N., 9 Apr 2016, In: International Journal of Fatigue. 90.2016, September, p. 23-35 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Quartalsreviewbericht_Q1-2016

    Primetzhofer, A., 30 Mar 2016

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    DE102015115719 (A1) - Prüfstand und Prüfverfahren mit verstellbarem Achsabstand zwischen Übertragungsprüfkörpern

    Grun, F. (Inventor) & Gódor, I. (Inventor), 24 Mar 2016, IPC No. G01M13/02, Patent No. DE102015115719 (A1), Priority date 18 Sept 2014, Priority No. AT20140050659

    Research output: Patent

  90. Published

    Reibungsreduktion ins hochbelasteten, geschmierten Kontatken durch Kugelstrahlen

    Moder, J. & Grün, F., 20 Mar 2016, GETLUB 2016: Tribologie- und Schmierstoffkongress. p. 391 403 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Durchgängige Simulationskette von der Konstruktion bis zur Spannungsbewertung

    Mösenbacher, A., Lucyshyn, T., Pußwald, S. & Primetzhofer, A., 15 Mar 2016, p. 1. 28 p.

    Research output: Contribution to conference › Presentation › Research

  92. Published

    Die Faserorientierung auf dem Prüfstand – Hinterfragung der Erwartungshaltung in der Lebensdauerabschätzung

    Mösenbacher, A., Müller, F., Primetzhofer, A. & Lucyshyn, T., 26 Feb 2016. 16 p.

    Research output: Contribution to conference › Presentation › Research

  93. Published

    Methoden und Ansätze zur Betriebsfesten Dimensionierung von kurzfaserverstärkten Thermoplasten in einer geschlossenen Simulationskette

    Mösenbacher, A., 20 Jan 2016. 49 p.

    Research output: Contribution to conference › Presentation › Transfer

  94. Published

    High- and low-cycle fatigue influence of silicon, copper, strontium and iron on hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys used in cylinder heads

    Huter, P., Renhart, P., Oberfrank, S., Schwab, M., Grün, F. & Stauder, B., 1 Jan 2016, In: International Journal of Fatigue. 82.2016, January, Part 3, p. 588-601 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Abschätzung der Schwingfestigkeit bei geringen Ausfallwahrscheinlichkeiten auf Basis des statistischen Größeneffektes

    Pauer, P., 2016

    Research output: Thesis › Master's Thesis

  96. Published

    Application studies for fatigue strength improvement of welded structures by high-frequency mechanical impact (HFMI) treatment

    Yildirim, H. C., Leitner, M., Marquis, G. B., Stoschka, M. & Barsoum, Z., 2016, In: Engineering Structures. 106, p. 422-435 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Aufbau einer numerischen Simulationskette für induktionsgehärtete Randschichten

    Aigner, R., 2016

    Research output: Thesis › Master's Thesis

  98. Published

    Beitrag zur Simulation der thermomechanischen Ermüdung stabil erstarrter Eisengusswerkstoffe

    Strohhäussl, B., 2016

    Research output: Thesis › Doctoral Thesis

  99. Published

    Betriebsfestigkeit geschweißter Leichtbaustrukturen

    Leitner, M., 2016.

    Research output: Contribution to conference › Presentation › Research

  100. Published

    Concept of fatigue design methodology for short fibre reinforced polymers considering environmental conditions

    Primetzhofer, A., Mösenbacher, A., Pinter, G. & Haslinger, T., 2016, In: AIP Conference Proceedings. 1779, 050012.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Contact models for mixed friction simulation

    Moder, J. & Grün, F., 2016, In: Design of Machines and Structures. 6, 1, p. 48-55 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Contact models for mixed friction simulation

    Moder, J. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...14 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401