Chair of Mechanical Engineering (140)

Organisational unit: Chair

1101 - 1150 out of 1,376Page size: 50

Research output

  1. 2009
  2. Published

    Von der Spritzgießsimulation zur Betriebsfestigkeitsdimensionierung – Entwicklung und Einsatz einer durchgängigen Simulationskette

    Fleischer, H., Brune, M., Thornagel, M., Thomas, B. & Guster, C., 2009, VDI Fachtagung: Kunststoffe im Automobilbau 2009. p. 1-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Vorgehensweise zur Implementierung von Werkstoffmodellen in die Lebensdauerbewertung von thermo-mechanisch beanspruchten Komponenten

    Fortin, M., 2009

    Research output: Thesis › Diploma Thesis

  4. Published

    Wirkungsgraduntersuchung von Zahnradpaaren auf Basis von RCF-Versuchsmethodiken

    Hölbfer, S. A., 2009

    Research output: Thesis › Diploma Thesis

  5. Published

    Zwischenbericht 1. Projektjahr Bridge Projekt - Kunststoff Funktionsbauteile

    Guster, C., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. 2008
  7. Published

    VERFAHREN UND VORRICHTUNG ZUR PRÜFUNG EINES PROBEKÖRPERS UNTER KOMBINIERTER UMLAUFBIEGE- UND TORSIONSBEANSPRUCHUNG

    Froeschl, J. (Inventor) & Eichlseder, W. (Inventor), 25 Jun 2008, IPC No. G01N 3/ 32 A I, Patent No. EP1934576, Priority date 11 Oct 2006, Priority No. WO2006EP09819

    Research output: Patent

  8. Published

    Analyzing thermo-mechanical simulation parameters of complex welded structures

    Fössl, T., Stoschka, M. & Eichlseder, W., 2008, 25th Danubia-Adria Symposium. p. 75-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    ANALYZING THERMO-MECHANICAL SIMULATION PARAMETERS OF COMPLEX WELDED STRUCTURES

    Fössl, T., Stoschka, M. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Anisotropy - the basic parameter for fatigue studies of fiber reinforced polymers

    Guster, C., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    A novel test methodology for optimizing metallic journal bearing materials

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2008, Nordtrib 2008; 13th Nordic Symposium on Tribology. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Application of Damage Tolerant Design in Mechanical Engineering

    Jan, M. M., 2008, 103 p.

    Research output: Thesis › Doctoral Thesis

  13. Published

    Assessment of lifetime calculation of forged IN718 aerospace components based on a mulit-parametric microstructural evaluation

    Stoschka, M., Stockinger, M., Leitner, H., Riedler, M. & Eichlseder, W., 2008, SUPERALLOYS 2008. p. 573-582

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  14. Published

    Assessment of lifetime calculation of forged IN718 aerospace components based on a multi-parametric microstructural evaluation

    Stoschka, M., Stockinger, M., Leitner, H. & Riedler, M., 2008, Eleventh International Symposium on Superalloys. p. 573-582

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Auswirkung von Kaltumformung und Wärmebehandlung auf die Dauerfestigkeit von rundgekneteten Getriebewellen

    Stoschka, M., Lamik, A. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Betriebsfestigkeit von innovativen Leichtmetallverschraubungen im Fahrzeuggetriebebau

    Hinteregger, C. G., 2008

    Research output: Thesis › Doctoral Thesis

  17. Published

    Bewertung der Beanspruchung eines Aktuatorhebels mittels FEM

    Maderbacher, H., Fröschl, J. & Christiner, T., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Bruchmechanische Lebensdauerbewertung von geschmiedeten Bauteilen aus Ti-6Al-4V

    Oberwinkler, B., Leitner, H. & Riedler, M., 2008, DVM Bericht 642, Tagung Werkstoffprüfung 2008. p. 257-262

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Characterisation of the Fatigue Behaviour of Ti-6Al-4V to Provide a Basis for the Lifetime Estimation

    Oberwinkler, B. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Charakterisierung des Einflusses von Chunky-Graphit auf die Schwingfestigkeit dickwandiger Gussbauteile

    Wohlfahrt, M., 2008, 103 p.

    Research output: Thesis › Diploma Thesis

  21. Published

    Charakterisierung von tribologischen Grenzschichten mittels Rasterelektronenmikroskopie

    Grün, F., Godor, I. & Sailer, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Comparison of the Teperature and Pre-Aging Influences on the Low Cycle Fatigue and Thermo-Mechanical Fatigue Behaviour of Copper Alloys (CuCoBe/CuCo2Be)

    Köberl, H., Winter, G., Leitner, H. & Eichlseder, W., 2008, In: Journal of ASTM international. Vol.5, p. 1-12

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Computed Tomography- an Alternative and Complement to Traditional Metallographic Investigations of Porosity in Cast Aluminium

    Powazka, D., Brune, M., Eichlseder, W., Leitner, H. & Oppermann, H., 2008, Computed Tomography- an Alternative and Complement to Traditional Metallographic Investigations of Porosity in Cast Aluminium. p. 51-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Computed Tomography for the Evaluation of the Influence of Porosity on Stress Distribution

    Powazka, D., Brune, M., Eichlseder, W., Leitner, H. & Oppermann, H., 2008, In: Archives of Foundry Engineering (AFE ; quarterly). 8, Special issue 1, p. 291-294

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Das Kitagwa-Haigh Diagramm für die Berechnung der Lebensdauer von Aluminiumdruckgussteilen

    Oberwinkler, C., Leitner, H. & Eichlseder, W., 2008, Das Kitagwa-Haigh Diagramm für die Berechnung der Lebensdauer von Aluminiumdruckgussteilen. p. 257-262

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Designing Test Methods and Deriving the Events Taking Place in Differently Designed Tribomaterials

    Grün, F., Godor, I. & Eichlseder, W., 2008, Lubricants, Materials and Lubrication Engineering. p. 76-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Design of a test rig for multialial fatigue properties

    Gräf, M., Fröschl, J. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Design of a test rig for multialial fatigue properties

    Gräf, M., Fröschl, J. & Eichlseder, W., 2008, Design of a test rig for multialial fatigue properties. p. 81-82

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Development of a strategy for evaluation of mean stress influences for an integral strength hypothesis

    Gerstmayr, G., Fröschl, J. & Eichlseder, W., 2008, 2nd Fatigue Symposium Leoben. p. 357-364

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Einfluss der Faserorientierung auf das Schwingfestigkeitsverhalten eines kgfv PA

    Guster, C., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Einfluss des Drehprozesses auf die Schwingfestigkeit von 34CrNiMo6 - Prozessparameterstudie, Eigenspannungen, Oberflächentopographie und Simulationsmodell

    Rieger, U., 2008, 80 p.

    Research output: Thesis › Diploma Thesis

  32. Published

    Einfluss des Verformungsgrades auf die Lebensdauer von Bauteilen aus Aluminium-Stahl Werkstoffverbunden

    Lamik, A., 2008

    Research output: Thesis › Doctoral Thesis

  33. Published

    Einfluss von Schrauben- und Mutternmaterial sowie der Betriebsbelastung auf das Relaxationsverhalten von Leichtmetallverschraubungen

    Hinteregger, C., Jakob, T. & Leitner, H., 2008, Einfluss von Schrauben- und Mutternmaterial sowie der Betriebsbelastung auf das Relaxationsverhalten von Leichtmetallverschraubungen. p. 28-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Engineering estimates in the region of high-cycle fatigue for the fatigue and crack growth behaviour of aluminium alloys

    Leitgeb, A., Jan, M., Gänser, H.-P. & Eichlseder, W., 2008, Engineering estimates in the region of high-cycle fatigue for the fatigue and crack growth behaviour of aluminium alloys. p. 380-388

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Engineering estimates in the region of high-cycle fatigue for the fatigue and crack growth behaviour of aluminium alloys

    Leitgeb, A., Jan, M., Gänser, H.-P. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Entwicklung einer Untersuchungsmethodik zur Evaluierung des Fretting-Widerstandes

    Reiser, J., 2008

    Research output: Thesis › Diploma Thesis

  37. Published

    Ermittlung der Schwingfestigkeit von reibrührgeschweißten Schraubenverbindungen

    Stoschka, M., Javidi, A., Leitner, H. & Lamik, A., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Evaluation of the load carrying capacity of differently manufactured sinter gear wheels

    Haberer, C. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Evaluation of the load carrying capacity of elastic deform forged planet gear wheels

    Haberer, C. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Evaluation of the tooth root strength of VAA450 hypoid gear wheels 20MoCr4, SNCM420

    Haberer, C. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Evaluation of the tooth root strength of VAA450 hypoid gear wheels SCM420

    Haberer, C. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Experimentelle Untersuchung und Erstelllung eines mesomechanischen Modells zur Ermittlung der Abhängigkeit der Schwingfestigkeit von Stahlguss (42CrMo4) vom Gefüge

    Maderbacher, H., Gänser, H.-P. & Wohlfahrt, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Expertise of thermomechanical fatigue at the institute of mechanical engineering

    Winter, G., Köberl, H. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Fatigue Life Behaviour of a Gear Tooth Root Taking Loading, Manufacturing, Surface Layer and Material into Account

    Haberer, C., Leitner, H., Fröschl, J. & Eichlseder, W., 2008, RELMAS 2008. p. 138-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Fertigungsbedingte Einflüsse auf die Schwingfestigkeit von Al-Gussbauteilen – Neue Erkenntnisse für Druckgussbauteile

    Powazka, D., Brune, M., Oppermann, H., Eichlseder, W. & Leitner, H., 2008, In: Gießerei-Rundschau. 55, p. 92-99

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Fiber orientation and fatigue behavior of a short glass-fiber reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Balika, W., Eichlseder, W. & Lang, R., 2008, 2. Fatigue Symposium Leoben. p. 444-455

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Fiber orientation and fatigue behaviour of a short glass-fiber reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Balika, W., Eichlseder, W. & Lang, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Friction Behaviour of Unfilled and Filled TPU

    Godor, I., Major, Z., Hausberger, A. & Schiffer, J., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Fricton behavior of unfilled and filled thermoplastic polyurethane materials

    Godor, I., Grün, F. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Further investigations on lower link fitting

    Stoschka, M. & Tan, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Influence of Machining on the Surface Integrity and Fatigue Strength of 34CrNiMo6 Steel

    Javidi, A., 2008

    Research output: Thesis › Doctoral Thesis

  52. Published

    Influence of Shot Peening on the Fatigue Behaviour of Ti-6Al-4V in Respect of Multiaxial Loading

    Oberwinkler, B., Leitner, H. & Stoschka, M., 2008, 10th International Conference on Shot Peening. p. 100-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...19 20 21 22 23 24 25 26 ...28 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401