Chair of Mechanical Engineering (140)

Organisational unit: Chair

201 - 300 out of 1,377Page size: 100

Research output

  1. 2020
  2. Published

    Local strain energy density approach to assess the fatigue strength of sharp and blunt V-notches in cast steel

    Schuscha, M., Leitner, M., Stoschka, M. & Meneghetti, G., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 105334.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Investigation of fibre orientation and notch support of short glass fibre lot reinforced thermoplastics

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2020, In: International Journal of Fatigue. 131.2020, February, 8 p., 105284.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Tribological investigations with near eutectic AlSi alloys found in engine vane pumps – Characterization of the material tribo-functionalities

    Summer, F., Pusterhofer, M., Grün, F. & Gódor, I., 1 Feb 2020, In: Tribology International. 146.2020, June, 13 p., 106236.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Assessment of Shaft Surface Structures on the Tribological Behavior of Journal Bearings by Physical and Virtual Simulation

    Pusterhofer, M., Summer, F., Maier, M. & Grün, F., 15 Jan 2020, In: Lubricants. 8.2020, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Close-to-Application Test Methodology Validated by a Baseline Study for Novel Bearing Developments in Aircraft Turbines

    Renhart, P., Summer, F., Grün, F. & Eder, A., 1 Jan 2020, In: Lubricants. 8, 1, p. 1-14 14 p., 7.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Friction and Wear Performance of Various Polymer Coatings for Journal Bearings under Stop Start Sliding

    Summer, F., Grün, F. & Ravenhill, E. R., 1 Jan 2020, In: Lubricants. 8.2020, 1, 14 p., 1.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Material behaviour of a dual hardening steel under thermomechanical loading

    Seisenbacher, B., Hofinger, M., Winter, G. & Grün, F., Jan 2020, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. 43.2020, 1, p. 191-200 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Areal fatigue strength assessment of cast aluminium surface layers

    Pomberger, S., Stoschka, M., Aigner, R., Leitner, M. & Ehart, R., 2020, In: International Journal of Fatigue. 133.2020, April, 11 p., 105423.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Auslegung und Optimierung von gefügten SLM-Bauteilen

    Kapeindl, S., 2020

    Research output: Thesis › Master's Thesis

  11. Published

    Development of a Tribological Model Test for Evaluating the Scuffing Resistance of Coated Piston Ring/Cylinder Liner Systems

    Wuketich, D., 2020

    Research output: Thesis › Master's Thesis

  12. Published

    Effect of surface layer on the fatigue strength of additively manufactured 17-4 PH steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., 2020.

    Research output: Contribution to conference › Paper

  13. Published

    Effekte bei der Übertragbarkeit von probenbasierten Rissfortschrittsmodellen zur bruchmechanischen Bewertung von Radsatzwellen

    Simunek, D., 2020

    Research output: Thesis › Doctoral Thesis

  14. Published

    Einfluss der Mikrostruktur auf das Kurzzeitfestigkeitsverhalten von AlSi-Gusslegierungen

    Pegritz, M., 2020

    Research output: Thesis › Master's Thesis

  15. Published

    Einfluss der Mikrostruktur auf die lokale Schwingfestigkeit von kurzfaserverstärkten Polymeren

    Schnetzinger, M., 2020

    Research output: Thesis › Master's Thesis

  16. Published

    Einfluss viskoelastischer Effekte auf das Schwingfestigkeitsverhalten von kurzglasfaserverstärkten Polymeren

    Maier, F., 2020

    Research output: Thesis › Master's Thesis

  17. Published

    Einfluss von Imperfektionen auf die Schwingfestigkeit hochfester Stahlschweißverbindungen

    Ottersböck, M., 2020

    Research output: Thesis › Doctoral Thesis

  18. Published

    Einfluss von Wärmebehandlung und Oberflächentopographie auf das Ermüdungsverhalten von additiv gefertigten Proben einer Al-Mg-Sc-Legierung

    Bauer, F., 2020

    Research output: Thesis › Master's Thesis

  19. Published

    Entwicklung einer Prüfapparatur für die hochfrequente Ermüdungsprüfung von dünnwandigen Strukturen

    Tillmanns, M., 2020

    Research output: Thesis › Master's Thesis

  20. Published

    Entwicklung eines Rainflow-Zählverfahrens für den Maschinen- und Anlagenbau

    Pashangpour, V., 2020

    Research output: Thesis › Master's Thesis

  21. Published

    Fatigue strength assessment of heterogeneously textured sand-cast aluminium surface layers

    Pomberger, S., 2020

    Research output: Thesis › Doctoral Thesis

  22. Published

    Implementierung ausgewählter Kriechmodelle in die numerische Simulation des WAAM-Prozesses

    Röcklinger, A., 2020

    Research output: Thesis › Master's Thesis

  23. Published

    Interaktion des Belastungskollektives und der Werkzeuggeometrie eines langsamlaufenden Einwellenzerkleinerers

    Feyerer, C., 2020

    Research output: Thesis › Master's Thesis

  24. Published

    Mapping fatigue strength of imperfective cast steel to manufacturing process by generalized fracture mechanics

    Schuscha, M., 2020

    Research output: Thesis › Doctoral Thesis

  25. Published

    Methods and technologies for the processing of water-hydrocarbon emulsions and technogenic raw materials of metallurgical and petrochemical enterprises: A review

    Khusnutdinov, S. I., Schenk, J., Khusnutdinov, I. S., Safiulina, A. F., Bazhin, V. Y. & Dubovikov, O. A., 2020, Topical Issues of Rational Use of Natural Resources 2019. Litvinenko, V. (ed.). p. 525-532 8 p. (Topical Issues of Rational Use of Natural Resources 2019; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

    Leitner, M., Aigner, R. & Grün, F., 2020, Advances in CAD/CAM/CAE Technologies. Multidisciplinary Digital Publishing Institute (MDPI)

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Numerische und experimentelle Eigenspannungsanalyse additiv gefertigter (SLM) AlSi10Mg-Strukturen

    Beter, F., 2020

    Research output: Thesis › Master's Thesis

  28. Published

    Simulationsbasierte Verschleißprognose einer hydrodynamischen Gleitlagerung für stationäre Reibungszustände

    Maier, M., 2020

    Research output: Thesis › Master's Thesis

  29. Published

    Untersuchungen zum Einfluss des Gleitschleifens auf die Ermüdungsfestigkeit von Aluminium- und Stahlproben

    Wallner, S., 2020

    Research output: Thesis › Master's Thesis

  30. 2019
  31. E-pub ahead of print

    Fatigue crack growth in railway axle specimens – Transferability and model validation

    Simunek, D., Leitner, M., Rieger, M., Pippan, R., Gänser, H.-P. & Weber, F. J., 12 Dec 2019, (E-pub ahead of print) In: International Journal of Fatigue. 133.2020, 14 p., 105421.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Development of a Model Test System for a Piston Ring/Cylinder Liner-Contact with Focus on Near-to-Application Seizure Behaviour

    Pusterhofer, M., Summer, F., Wuketich, D. & Grün, F., 22 Nov 2019, In: Lubricants. 7.2019, 12, p. 104-115 12 p., 104.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Influencing factors on the fatigue strength of selectively laser melted structures

    Schneller, W., Leitner, M., Springer, S., Beter, F. & Grün, F., 20 Nov 2019.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Thermomechanical fatigue testing of dual hardening tool steels

    Hofinger, M., Seisenbacher, B., Ognianov, M., Leitner, H., Turk, C., Kapp, M. & Schnitzer, R., 19 Nov 2019, In: Steel research international. p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Crack Initiation and Propagation Fatigue Life of Ultra High-Strength Steel Butt Joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 1 Nov 2019, In: Applied Sciences : open access journal. 9.2019, 21, 4590.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Effect of Post Treatment on the Microstructure, Surface Roughness and Residual Stress Regarding the Fatigue Strength of Selectively Laser Melted AlSi10Mg Structures

    Schneller, W., Leitner, M., Pomberger, S., Springer, S., Beter, F. & Grün, F., 16 Oct 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 4, 21 p., 89.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Notch Stress Intensity Factor (NSIF)-Based Fatigue Design to Assess Cast Steel Porosity and Related Artificially Generated Imperfections

    Schuscha, M., Horvath, M., Leitner, M. & Stoschka, M., 11 Oct 2019, In: Metals : open access journal . 9.2019, 10, 28 p., 1097.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Influence of surface roughness on additively manufactured aluminum components

    Springer, S., Schneller, W., Leitner, M. & Grün, F., 26 Sept 2019.

    Research output: Contribution to conference › Poster › Research

  39. Published

    Influence of surface roughness on additively manufactured aluminum components

    Springer, S., Schneller, W., Leitner, M. & Grün, F., 24 Sept 2019, 36th Danubia Adria Symposium on Advances in Experimental Mechanics: Extended Abstracts. Plzen, Czech Republic, p. 105-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    On the behaviour of non-propagating cracks in steel and aluminium castings

    Schuscha, M., Aigner, R., Pomberger, S., Oberreiter, M., Leitner, M. & Stoschka, M., 17 Sept 2019, In: Engineering Fracture Mechanics. 220.2019, 15 October, 106670.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Cast surface texture characterisation via areal roughness

    Pomberger, S., Stoschka, M. & Leitner, M., 12 Sept 2019, In: Precision Engineering. 60.2019, p. 465-481 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Fretting behavior of thermoplastic polyurethanes

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 23 Aug 2019, In: Lubricants. 7.2019, 9, 24 p., 73.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Correlation of Tribological Behavior and Fatigue Properties of Filled and Unfilled TPUs

    Wang, C., Stiller, T., Hausberger, A., Pinter, G., Grün, F. & Schwarz, T., 20 Jul 2019, In: Lubricants. 7.2019, p. 1-18 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Damage models of different hardness layers subjected to point contact

    Trausmuth, A., Godor, I. & Grün, F., 15 Jul 2019, In: Wear. 430-431.2019, July, p. 157-168 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    A baseline study for developing novel coatings for high performance journal bearings in aircraft-turbines

    Renhart, P., Summer, F. & Grün, F., 13 Jun 2019, ECOTRIB 2019. Österreichische Tribologische Gesellschaft, p. 70 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Development of a model test system for a piston ring/cylinder liner-contact with focus on near-to-application seizure behaviour

    Pusterhofer, M., Wuketich, D., Summer, F. & Grün, F., 13 Jun 2019, ECOTRIB 2019. Österreichische Tribologische Gesellschaft, p. 1 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    On the mean stress sensitivity of cast aluminium considering imperfections

    Aigner, R., Leitner, M. & Stoschka, M., 5 Jun 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 758.2019, June, p. 172-184 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    On the Statistical Size Effect of Cast Aluminium

    Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., 14 May 2019, In: Materials. 12.2019, 10, 19 p., 1578.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Numeric modeling of induction hardened boundary layers

    Aigner, R., 8 May 2019, Proceedings International FEMFAT User Meeting 2019: Fatigue Analysis of Joint Connections.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process

    Ernould, C., Schubnell, J., Farajian, M., Maciolek, A., Simunek, D., Leitner, M. & Stoschka, M., 1 May 2019, In: Welding in the world. 63.2019, 3, p. 725-738 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Analysis of fatigue notch effect due to axial misalignment for ultra high-strength steel butt joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., May 2019, In: Welding in the world. 63.2019, 3, p. 851-865 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Evaluation of surface roughness parameters and their impact on fatigue strength of Al-Si cast material

    Pomberger, S., Leitner, M. & Stoschka, M., May 2019, In: Materials Today: Proceedings. 12.2019, 2, p. 225-234 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Numerical crack growth study on porosity afflicted cast steel specimens

    Schuscha, M., Leitner, M., Stoschka, M., Pusterhofer, S. & Meneghetti, G., 1 Apr 2019, In: Frattura ed integrità strutturale. 13.2019, 48, p. 58-69 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Challenges of friction reduction of engine plain bearings – Tackling the problem with novel bearing materials

    Summer, F., Grün, F., Offenbecher, M. & Taylor, S., 1 Mar 2019, In: Tribology International. 131.2019, March, p. 238-250 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Lifetime assessment of anisotropic materials by the example short fibre reinforced plastic

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 1 Mar 2019, In: International Journal of Fatigue. 120.2019, March, p. 294-302 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Effects of High Frequency Mechanical Impact on Fatigue Life of Semi-Automated Gas Metal Arc Welding (GTAW) of HSLA Butt Weld

    Saidin, S., Andud, D., Manurung, Y., Faiz Mat, M., Nordin, N. & Leitner, M., 22 Feb 2019, In: MATEC Web of Conferences . 269.2019, 7 p., 06002.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Fatigue Life Enhancement of Transverse and Longitudinal T Joint on Offshore Steel Structure HSLAS460G2+M using Semiautomated GMAW and HFMI/PIT

    Andud, D., Faiz Mat, M., Manurung, Y., Saidin, S., Nordin, N., Muhammad, N. & Leitner, M., 22 Feb 2019, In: MATEC Web of Conferences . 269.2019, 6 p., 06001.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys

    Aigner, R., Pusterhofer, S., Pomberger, S., Leitner, M. & Stoschka, M., 4 Feb 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 745.2019, February, p. 326-334 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens

    Simunek, D., Leitner, M., Maierhofer, J., Gänser, H.-P. & Pippan, R., 3 Feb 2019, In: Metals : open access journal . 9.2019, 2, p. 184 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Application of different simulation approaches to numerically optimize high-frequency mechanical impact (HFMI) post-treatment process

    Ernould, C., Schubnell, J., Farajian, M., Maciolek, A., Simunek, D., Leitner, M. & Stoschka, M., 1 Feb 2019, In: Welding in the world. 63.2019, 1 May, p. 725-738 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Feb 2019, In: Journal of Manufacturing and Materials Processing. 3.2019, 1, 9 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Data set determination for lifetime assessment of short fibre reinforced polymers

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grun, F., 1 Jan 2019, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Datensatzermittlung zur lebensdauervorhersage kurzfaserverstärkter kunststoffe

    Primetzhofer, A., Stadler, G., Grün, F. & Pinter, G., 1 Jan 2019, In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Reproducibility of navigation based kinematic analysis of the knee – A cadaveric investigation

    Maderbacher, G., Keshmiri, A., Springorum, H. R., Maderbacher, H., Grifka, J. & Baier, C., 1 Jan 2019, In: Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association . 24.2019, 1, p. 128-135 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks

    Leitner, M., Simunek, D., Maierhofer, J., Gänser, H.-P. & Pippan, R., 1 Jan 2019, In: Metals : open access journal . 9.2019, 2, 13 p., 156.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Jan 2019, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Analysis on Substrate Distortion Analysis Induced by Wire Arc Additive Manufacturing of SS316L using FEM Simulation with Simplified Meshing and Different Heat Source Models

    Faiz Mat, M., Manurung, Y., Muhammad, N., Nursyahirah Binti Ahmad , S., Helena Sipi Anak Pengadau , F., Prüller, S. & Leitner, M., 2019, 72nd IIW Annual Assembly and International Conference: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Analytical and numerical simulation of fatigue crack propagation under constant amplitude loading on SENT specimen with experimental verification

    Olanrewaju Busari, Y., Manurung, Y., Ariri , A., Alva, S., Sebayang, D., Nordin, N. & Leitner, M., 2019, 72nd IIW Annual Assembly and International Conference: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Aufbau einer modularen Prüfmethodik zur betriebsfesten Charakterisierung von gussrauen Randschichten

    Oberreiter, M., 2019

    Research output: Thesis › Master's Thesis

  71. Published

    Aufbau einer numerischen Simulationskette zur automatisierten Ermüdungsfestigkeitsbewertung von Stahlgussdefekten

    Horvath, M., 2019

    Research output: Thesis › Master's Thesis

  72. Published

    Ausarbeitung eines Konzeptes für einen Getriebeaufsatz zur Kompensierung regulärer und irregulärer Belastungen

    Rosner, T., 2019

    Research output: Thesis › Master's Thesis

  73. Published

    Auslegung thermomechanisch gefertigter Strukturen

    Grün, F. & Leitner, M., 2019, Proceedings zu Neue Technologien und Innvoationen in der Fahrzeugtechnik XVI. Steyr, p. 1 30 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Betriebsfestigkeitsbewertung HFMI-nachbehandelter Schweißverbindungen auf Basis lokaler Konzepte

    Gerstbrein, S., 2019

    Research output: Thesis › Master's Thesis

  75. Published

    Characterising the fatigue strength of aluminium castings by applied statistical evaluation of imperfections

    Aigner, R., 2019

    Research output: Thesis › Doctoral Thesis

  76. Published

    Consideration of ageing effects during the TMF test on the stress-strain behaviour of an aluminium alloy

    Seisenbacher, B., Winter, G. (Co-editor) & Grün, F. (Co-editor), 2019.

    Research output: Contribution to conference › Abstract

  77. Published

    Effect of surface condition on the fatigue strength of selectively laser melted metallic structures

    Leitner, M., Schneller, W., Springer, S., Beter, F. & Grün, F., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-WG4-171-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Einfluss der Randschicht auf die Ermüdungsfestigkeit additiv gefertigter Aluminiumbauteile

    Springer, S., 2019

    Research output: Thesis › Master's Thesis

  79. Published

    Einfluss von Vorkorrosion auf die statische und zyklische Festigkeit von Al-Druckgussbauteilen

    Schönowitz, M., 2019

    Research output: Thesis › Master's Thesis

  80. Published

    Entwicklung einer Prüfvorrichtung für Hochtemperaturversuche an einem elektrodynamischen Shaker

    Prommegger, M., 2019

    Research output: Thesis › Master's Thesis

  81. Published

    Entwicklung und Validierung einer Prüfmethodik zur Charakterisierung des dynamischen Verhaltens von geschraubten Fügestellen

    Himmelbauer, F., 2019

    Research output: Thesis › Master's Thesis

  82. Published

    Ermüdungsfestigkeitsbewertung geschweißter und HFMI-nachbehandelter Stahlstrukturen

    Leitner, M., 2019, DEUTLICH GÜNSTIGERE AUSLEGUNG SCHWINGEND BEANSPRUCHTER KONSTRUKTIONEN: Große Einsparpotenziale mit Bemessungsgrundlagen nach neuen HFMI-Richtlinien (IIW/DASt). Duisburg

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Evaluation of wood cutting forces in dry and wet conditions by small-scale hipping tests applying different analysis methods

    Pichler, P., Springer, S. & Leitner, M., 2019, In: Wood Material Science & Engineering . 14.2019, 3, p. 185-190 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Experimentelle und numerische Untersuchungen zum Einfluss der Einspannung beim WAAM-Prozess

    Wallner, D., 2019

    Research output: Thesis › Master's Thesis

  85. Published

    Fatigue design of metallic components considering bulk and surface imperfections

    Leitner, M., Schneller, W., Pusterhofer, S. & Stoschka, M., 2019, Intermediate Meeting of IIW Commission XIII: IIW Document XIII-WG4-167-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Fatigue strength assessment of HFMI-treated steel joints under variable amplitude loading

    Leitner, M., Stoschka, M., Barsoum, Z. & Farajian, M., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-2818-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Fatigue strength of welded joints and additively manufactured structures

    Grün, F. & Leitner, M., 2019, Proceedings International FEMFAT User Meeting 2019: Fatigue Analysis of Joint Connections.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    FEM Simulation Procedure for Distortion and Residual Stress Analysis of Wire Arc Additive Manufacturing

    Nursyahirah Binti Ahmad , S., Manurung, Y., Faiz Mat, M., Minggu, Z., Prüller, S. & Leitner, M., 2019, 6th International Conference on Advances in Mechanical Engineering 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Grain growth prediction of bead-on-plate with filler wire SS316L using FEM

    Faiz Mat, M., Manurung, Y., Muhammad, N., Ditler, A., Syakir Abd Ghani, M. & Leitner, M., 2019, 6th International Conference on Advances in Mechanical Engineering 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Influencing factors on the fatigue strength of selectively laser melted structures

    Schneller, W., Leitner, M., Springer, S., Beter, F. & Grün, F., 2019, Procedia Structural Integrity: Fatigue Design 2019, International Conference on Fatigue Design, 8th Edition. Vol. 19. p. 556 - 565 10 p. (Procedia Structural Integrity).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Investigation of water droplet impingement under conditions of the secondary cooling zone of a continuous slab caster

    Preuler, L., Peyha, M., Weiß, C., Bernhard, C. & Ilie, S., 2019, AISTech - Iron and Steel Technology Conference Proceedings. Vol. 2019-May. p. 1441-1449 9 p. (AISTech - Iron and Steel Technology Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  92. Published

    Novel model test configuration for investigation of cam/tappet contacts

    Grün, F., Gódor, I., Summer, F. & Moizan, S., 2019, p. 1-2.

    Research output: Contribution to conference › Abstract › peer-review

  93. Published

    Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

    Leitner, M., Aigner, R. & Grün, F., 2019, In: Machines : open access journal . 7.2019, 1, 1.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Numerische Analyse ausgewählter Versagensmechanismen bei hochbelasteten Verzahnungen

    Berner, M., 2019

    Research output: Thesis › Master's Thesis

  95. Published

    Numerische Modellierungsstrategien von schalenmodellbasierten Schweißverbindungen

    Bittendorfer, M., 2019

    Research output: Thesis › Master's Thesis

  96. Published

    Numerische und experimentelle Analyse eines drahtbasierten additiven Herstellprozesses

    Berger, R., 2019

    Research output: Thesis › Master's Thesis

  97. Published

    Short and long crack growth of aluminium cast alloys

    Leitner, M., Aigner, R., Pomberger, S., Stoschka, M., Garb, C. & Pusterhofer, S., 2019, Structural Integrity: Mechanical Fatigue of Metals. 7 ed. Springer, p. 139-145 7 p. (Structural Integrity; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  98. Published

    Structural FE-analysis of porous laser welded aluminium die castings based on X-ray computed tomography data

    Teichmann, F., Ziemer, A., Leitner, M., Hensel, J. & Dilger, K., 2019, 72nd IIW Annual Assembly and International Conference: IIW Document XIII-2791-19.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Technological aspects in fatigue design

    Leitner, M., 2019

    Research output: Thesis › Habilitation thesis › peer-review

  100. Published

    Thermal relaxation of residual stresses in Ti-6-4

    Stanojevic, A., Oberwinkler, B. & Leitner, M., 2019, The World Conference on Titanium (Ti-2019).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Thermo-mechanical fatigue testing of dual hardening tool steels

    Hofinger, M., Seisenbacher, B., Ognianov, M., Leitner, H., Turk, C., Kapp, M. & Schnitzer, R., 2019.

    Research output: Contribution to conference › Abstract

  102. Published

    Transient Temperature and Substrate Distortion Analysis Induced by Wire Arc Additive Manufacturing of SS316L using Experiment and FEM with Simplified Bead Model

    Nursyahirah Binti Ahmad , S., Manurung, Y., Faiz Mat, M., Minggu, Z., Helena Sipi Anak Pengadau , F., Prüller, S. & Leitner, M., 2019, 72nd IIW Annual Assembly and International Conference: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 8 ...14 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401