Chair of Mechanical Engineering (140)
Organisational unit: Chair
Research output
- 2012
- Published
Fatigue Life Investigations of Differently Hardened Specimens in Lubricated Tribological Rolling Contacts
Trausmuth, A., Godor, I., Grün, F., Stoschka, M., Dietrich, A. & Eichlseder, W., 2012, Technische Akademie Esslingen. p. 1-7Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Fretting fatigue, its influence on the fatigue endurance limit and palliative measures against fretting.
Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2012, Fretting Fatigue Fatigue de Contact: Experimentations, Modelisationes et Startegies Palliatives. p. 103-110Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Fretting Wear and Fretting Fatigue influencing the material properties of a high strenght CrNi steel
Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2012, Book of abstracts 15th Nordic Symposium on Tribology, 2012. p. 21-21Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Herstellung von Panzerschichten mit Hartstoffpartikeln auf MSG-Basis
Barwart, S., Leitner, M. & Oberwinkler, C., 2012, In: Tribologie und Schmierungstechnik. p. 19-23Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of Fretting on the fatigue endurance limit
Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2012, Coference Transcript, 3rd Fatigue Symosium Leoben. p. 279-286Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Influence of High Frequency Peening on Fatigue of High-Strength Steels
Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2012, In: FME transactions.Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of Multiaxial Fatigue Loadings on Fatigue Behaviour of Austempered Ductile Iron
Zivkovic, I., Wohlfahrt, M. & Guster, C., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Influence of steel grade on the fatigue strength enhancement by high frequency peening technology on longitudinal fillet weld gusset
Leitner, M. & Stoschka, M., 2012, In: Journal of Engineering and Technology. 1, 3, p. 80-90 11 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ observation of initiation and propagation of (short) microstructural crack growth using a rotating bending machine
Huter, P., Wohlfahrt, M. & Oberwinkler, C., 2012, Proceedings of the 4th International Conference on CRACK PATHS (CP 2012). p. 12-19Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Integration of material microstructure relations into fatigue design of aluminum-die-cast engine components
Redik, S. & Guster, C., 2012, Aluminium – material for the future. p. 1-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Integrative Methode zur betriebsfesten Auslegung von Laserschweißnähten
Thaler, M., 2012, 113 p.Research output: Thesis › Doctoral Thesis
- Published
Investigation of Concepts Describing the Influence of Stress Concentration on the Fatigue Behaviour of Short Glass Fibre Reinforced Polyamide
Eichlseder, W., Mösenbacher, A., Guster, C. & Pinter, G., 2012, Proceedings of the 15th European Conference on Composite Materials. VeniceResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
LCF and TMF characterisation for two aluminium die cast alloys
Huter, P., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Leichtbau für Windkraftanlagen
Kainzinger, P. & Wohlfahrt, M., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Lifetime Assessment of hot-forged Ti-6Al-4V Aircraft Components based on microstructure and Numerical Analysis
Tan, W., 2012Research output: Thesis › Doctoral Thesis
- Published
Local fatigue behaviour of welded joints
Leitner, M., Stoschka, M. & Barwart, S., 2012, Lightweight Design. p. 73-84Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Microstructural Assessment of IN718: A Closed-Loop Fatigue Approach
Stoschka, M., Maderbacher, H. & Stockinger, M., 2012, Materials Science Forum. Vol. 706-709.2012. p. 2468-2473 (Materials Science Forum).Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
New developed filler metals for welding of high strength steels
Schnitzer, R., Leitner, M., Fiedler, M. & Stoschka, M., 2012, Proceedings to the 2nd International Welding and Joining Technologies Congress and 19th Technical Welding Sessions. p. 1-12Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Novel Fatigue Characterization and its Evaluation on a Forged Ti-6Al-4V Component
Tan, W., 2012, Proceedings of the 12th World Conference on Titanium. p. 1979-1983Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Numerical and experimental investigation of non-conformal lubricated contects
Krampl, H., Grün, F. & Godor, I., 2012, Nordic Symposium on Tribology. p. 1-6Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Numerische und versuchstechnische Beurteilung geschmierter Kontakte inhomogener Werkstoffe
Krampl, H., 2012, 191 p.Research output: Thesis › Doctoral Thesis
- Published
Oberflächenermüdung von nitrierten, einsatz- und durchgehärteten Werkstoffen
Trausmuth, A., 2012, 515 p.Research output: Thesis › Doctoral Thesis
- Published
Optimierung geschmierter Tribokontakte auf Basis tribometrischer und numerischer Untersuchungen
Krampl, H., Grün, F. & Godor, I., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Praktische Anwendungen eines höherfrequenten Hämmerverfahrens (PIT) in der Industrie
Gerster, P., Leitner, M. & Stoschka, M., 2012, Tagungsband. p. 1-11Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Prediction of the low cycle fatigue regime of the S-N curve with application to an aluminium alloy
Eichlseder, W., Gänser, H.-P. & Jan, M.-M., 2012, In: Proceedings of the Institution of Mechanical Engineers / C (Part C, Journal of mechanical engineering science). 226, p. 1198-1209Research output: Contribution to journal › Article › Research › peer-review
- Published
Prinzipielle Anwendung des Eurocodes auf Komponenten einer ESU-Anlage
Hofbauer, C., 2012Research output: Thesis › Diploma Thesis
- Published
Projektendbericht - Ermüdungsfestigkeit von Laserschweißnähten
Thaler, M., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Quality testing of high-strength filler metals in regard to technical cracking – Part 1: IIW-II-C-438-11
Stoschka, M., Leitner, M., Schnitzer, R. & Schörghuber, M., 2012Research output: Non-textual form › Web publication/site › Research
- Published
Rechnerische und experimentelle Untersuchung der Schmierfilmbildung in Tribokontakten mittels kommerzieller Softwarepakete
Krampl, H., Grün, F. & Godor, I., 2012, In: Tribologie und Schmierungstechnik. 59, p. 7-12Research output: Contribution to journal › Article › Research › peer-review
- Published
Schwingfestigkeit hochfester Stähle an geschweißten Strukturen
Leitner, M., Stoschka, M., Fössl, T. & Eichlseder, W., 2012, In: Schweiß- & Prüftechnik. p. 12-17Research output: Contribution to journal › Article › Research › peer-review
- Published
Schwingfestigkeitsuntersuchung sowie Form- und Topologieoptimierung an einem Aluminiumdruckgussgehäuse
Rinnergschwentner, L., 2012Research output: Thesis › Diploma Thesis
- Published
Simulation of tribological functionality of heterogeneous tribomaterials
Grün, F., Godor, I., Sailer, W. & Gänser, H.-P., 2012, In: Tribology International. 46, p. 119-127Research output: Contribution to journal › Article › Research › peer-review
- Published
Study of interactions between lubricant components and tribomaterial surfaces
Pondicherry, K., 2012Research output: Thesis › Doctoral Thesis
- Published
Study of Kinematic Strain Hardening Law in Transient Welding Simulation
Ottersböck, M., Stoschka, M. & Thaler, M., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Synergy between secondary phases in aluminium based tribomaterials and lubrucant additives
Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2012, 15th Nordic Symposium on Tribology. p. 1-6Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
The fatigue behaviour of a high strength CrNi- steel regarding fretting fatigue
Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2012,Proceedings of the ASME 2012 Pressure Vessels & Piping Division Conference
. p. 1-8Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
TMF investigations of different cast irons
Huter, P., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Topology optimization of a light-weight harvester head focussing on the delimbing knife unit
Oppliger, F., Leitner, M. & Stoschka, M., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Tribological funtionality of aluminium sliding materials with hard phases under lubricated conditions
Grün, F., Summer, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2012, In: Wear. p. 127-134Research output: Contribution to journal › Article › Research › peer-review
- Published
Tribological testing of lubricated mechanical contacts
Grün, F., Godor, I., Schiffer, J., Krampl, H. & Pondicherry, K., 2012, 3rd Fatigue Sypmposium. p. 266-267Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Untersuchungen zu verschiedenen Schweißnahtgeometrien
Thaler, M., 2012Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Valuation of TMF Lifetime Calculation Methods and their Limitations of Usabililty
Köberl, H., Winter, G. & Eichlseder, W., 2012, Key engineering materials. Vol. 488-489. p. 403-406 (Key engineering materials).Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
Visualization of the processes taking place in the contact zone with in-situ tribometry
Grün, F., Sailer, W. & Godor, I., 2012, In: Tribology International. 48, p. 44-53Research output: Contribution to journal › Article › Research › peer-review
- Published
Wear and Strength Investigation of Shredding Tools with Different Designed Wearing Surfaces
Feyerer, C., Mösenbacher, A. & Guster, C., 2012.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Welding procedure for high strength welds and their microstructural evolution during solidification and cooling: IIW Doc. II-C-436-11
Vanovsek, W., Schnitzer, R., Schlagradl, T., Schneider, R., Posch, G., Schider, S., Bernhard, C., Leitner, H., Rauch, R., Fiedler, M. & Stoschka, M., 2012Research output: Non-textual form › Web publication/site › Research
- Published
Zum Einfluss überlagerter Mittelspannung und Temperatur auf das zyklische Materialverhalten von Gusseisen mit Kugelgraphit
Kainzinger, P., Guster, C., Wolf, A. & Severing, M., 2012, In: Gießerei-Rundschau. p. 288-292Research output: Contribution to journal › Article › Research › peer-review
- 2011
- Published
PROBENANALYSESYSTEM
Froeschl, J. (Inventor) & Eichlseder, W. (Inventor), 20 Jul 2011, IPC No. G01N 3/ 04 A I, Patent No. EP2344859 (A2), Priority date 30 Oct 2009, Priority No. WO2009EP07796Research output: Patent
- Published
Verfahren und Vorrichtung zur Prüfung eines Probekörpers unter kombinierter Umlaufbiege- und Torsionsbeanspruchung
Froeschl, J. (Inventor) & Eichlseder, W. (Inventor), 9 Mar 2011, IPC No. G01N 3/ 32 A I, Patent No. EP2293040B1, Priority date 11 Oct 2006, Priority No. EP20060792417Research output: Patent
- Published
VERFAHREN UND VORRICHTUNG ZUR PRÜFUNG EINES PROBEKÖRPERS UNTER KOMBINIERTER UMLAUFBIEGE- UND TORSIONSBEANSPRUCHUNG
Froeschl, J. (Inventor) & Eichlseder, W. (Inventor), 15 Feb 2011, IPC No. G01N 3/ 32 A I, Patent No. AT497601T, Priority date 11 Oct 2006, Priority No. WO2006EP09819Research output: Patent
- Published
Aluminum Based Sliding Materials with Soft Phases-Intrinsic For-giving Overload Behavior?
Grün, F., Gódor, I. & Eichlseder, W., 3 Feb 2011, Friction, Wear and Wear Protection: International Symposium on Friction, Wear and Wear Protection 2008 Aachen, Germany. Wiley-VCH , p. 45-51 7 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research