Chair of Mechanical Engineering (140)

Organisational unit: Chair

601 - 650 out of 1,376Page size: 50

Research output

  1. 2015
  2. Published

    Local fatigue assessment of welded and high frequency mechanical impact (HFMI) treated joints by simulation

    Simunek, D., Leitner, M. & Stoschka, M., 2015.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Overview of residual stress measurement and fatigue test data for Pneumatic Impact Treated (PIT) joints

    Schäfers, F., Gerster, P. & Leitner, M., 2015.

    Research output: Contribution to conference › Paper

  4. Published

    Technische Polymere für Tribo-Anwendungen Möglichkeiten und Herausforderungen

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Tribological in-situ evaluation of lubricated contacts of real-life engineering materials

    Grün, F., Godor, I., Summer, F., Bergmann, P. & Moder, J., 2015, Proceedings of 3rd OilDoc Conference and Exhibition. Rosenheim

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Tribologie im Motorenbau

    Grün, F., 2015, Neue Technologien und Innovationen in der Fahrzeugtechnik XII - Proceedings. Steyr

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Yield stress evolution in Inconel 718 samples under standard heat treatment process conditions of turbine disks

    Drexler, A., Maderbacher, H., Povodon-Karadeniz, E., Gänser, H. P., Ecker, W., Oberwinkler, B. & Fischersworring-Bunk, A., 2015, European Conference on Heat Treatment 2015 and 22nd IFHTSE Congress - Heat Treatment and Surface Engineering from Tradition to Innovation. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. 2014
  9. E-pub ahead of print

    Ermüdungsfestigkeit hochfester Stahlschweißverbindungen: Fatigue Strength of High-strength Welded Steel Joints

    Leitner, M., Stoschka, M., Ottersböck, M. & Simunek, D., 13 Dec 2014, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 1, p. 9-14 6 p.

    Research output: Contribution to journal › Article › Research

  10. E-pub ahead of print

    Einfluss der lokalen Gefügeausbildung auf die Schwingfestigkeit von Gusseisen mit Kugelgraphit

    Kainzinger, P., Wohlfahrt, M. & Grün, F., 6 Dec 2014, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 1, p. 2-8 7 p.

    Research output: Contribution to journal › Article › Research

  11. Published

    Tribological modeltesting in powertrains

    Grün, F., Godor, I. & Krampl, H., 7 Nov 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Auslegung von Bauteilen mit "realen" Werkstoffen

    Kainzinger, P., Grün, F., Redik, S. & Mösenbacher, A., 24 Oct 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Fatigue strength assessment according to the FKM-guideline in case of non-proportional stresses

    Leitner, B., Fiedler, A. G. & Leitner, M., 1 Sept 2014, In: Konstruktion. 66, 9, p. 76-82 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Mean Stress Sensitivity of Ductile Iron with respect to Technological and Statistical Size Effect Considerung Defects

    Kainzinger, P. & Grün, F., 13 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  15. Published

    Mechanisms of fatigue-crack initiation and their impact on fatigue life of AlSi7 die-cast-components

    Redik, S., Tauscher, M. & Grün, F., 13 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  16. Published

    A study on the fatigue crack initiation point of longitudinal attachments

    Ottersböck, M., Leitner, M. & Stoschka, M., 17 Mar 2014.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Assessment of the effect of tensile Overloads on the Fatigue Behaviour of quenched and tempered Steel

    Garb, C., Strohhaüssl, B., Winter, G. & Grün, F., 1 Jan 2014, 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings. p. 30-31 2 p. (31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Aktuelle Aktivitäten zu den Europäischen Rohstoffinitiativen

    Maier, A., Moser, P., Eichlseder, W., Mühlburger, M., Brugger, K., Antrekowitsch, H. & Hoscher, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 143-148

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Assessment of the effect of tensile overloads on the fatigue behaviour of quenched and tempered steel

    Garb, C., Grün, F., Winter, G. & Strohhäussl, B., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Aufbau einer numerischen Simulationskette zur betriebsfesten Bewertung hochfrequent gehämmerter Schweißverbindungen

    Simunek, D., 2014, 102 p.

    Research output: Thesis › Diploma Thesis

  21. Published

    Ausgewählte Einflüsse auf das Rissfortschrittsverhalten am Beispiel zweier AlSi-Gusslegierungen

    Lamik, A., 2014

    Research output: Thesis › Diploma Thesis

  22. Published

    Auswirkungen verschiedener Lastinteraktionen auf das Lebensdauerverhalten eines Vergütungsstahls

    Garb, C., 2014, 113 p.

    Research output: Thesis › Diploma Thesis

  23. Published

    Bauteilversuche an Getriebedeckeln - Zwischenbericht

    Maderbacher, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Bericht_WP1_Materialdefinition

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Bericht_WP2_Definition_Prüfmatrix

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Bericht_WP3_Definition Probekoerpergeometrie

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Bericht_WP4_Herstellung Prüfkörper mittels Spritzgießen

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Bericht_WP5_Konzipierung geeigneter Einspannung für Torsionsproben

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Bericht_WP5_Literaturrecherche_und_Aufbereitung_bereits_vorhandener_Materialdatensaetze

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Bericht_WP6_Durchführung von quasistatischen und zyklischen Referenzversuchen

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Bewertung der Betriebsfestigkeit von Schweißnähten basierend auf einer Schweißstruktursimulation

    Ottersböck, M., Maier, B. & Stoschka, M., 2014, Tagungsband „Simulationsforum Schweißen und Wärmebehandlung 2013“. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Bewertung des Einflusses von Defekten auf die Schwingfestigkeit von Gusseisen mit Kugelgraphit

    Kainzinger, P., Guster, C., Severing, M. & Ballmes, H., 2014, DVM-Bericht 1681. p. 19-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Bewertung von Mischreibungsvorgängen in kontraformen Kontakten

    Moder, J., 2014

    Research output: Thesis › Diploma Thesis

  34. Published

    Charakterisierung der Schwingfestigkeit einer Al-Thixogusslegierung

    Mösenbacher, A., Tan, W. & Guster, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Charakterisierung von Quellung und Medieneinfluss zur Lebensdauerbewertung von kurzglasfaserverstärkten Polyamiden

    Haslinger, T., 2014, 111 p.

    Research output: Thesis › Diploma Thesis

  36. Published

    Comparison of microstructural crack paths between hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys in high plasticity regimes under rotating bending

    Huter, P., Winter, G., Renhart, P., Schwab, M., Oberfrank, S., Grün, F. & Stauder, B., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 618, p. 578-585

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Contact fatigue life investigations and wear mechanisms of gears with different steels and hardening process

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2620-2623 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Contribution towards fatigue strength of thermo-mechanically processed metallic components

    Stoschka, M., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  39. Published

    Development of a design and optimization method for high pressure components

    Müther, A., Maier, B., Godor, I., Christiner, T., Stühlinger, R. & Trieb, F., 2014, In: Design of Machines and Structures. 4, p. 33-43

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Efficient material development for elastomeric sealing materials via the correlation between tribological model tests and component testing

    Hausberger, A., Godor, I. & Grün, F., 2014, Book of Abstracts of Asiatrib 2014. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Endbericht FFG2116580 TMF-Alu

    Huter, P., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Entwicklung einer Auslegungs- und Optimierungsmethode für Hochdruckbauteile

    Müther, A., 2014, 118 p.

    Research output: Thesis › Diploma Thesis

  43. Published

    Entwicklung eines Referenzbauteils zur Prüfung von dickwandigen Großgussbauteilen

    Auer, M., 2014, 103 p.

    Research output: Thesis › Diploma Thesis

  44. Published

    Evaluation of the residual stress distribution in thin films by means of the ion beam layer removal method

    Kozic, D., Treml, R., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014. Zhang, G. Q., Van Driel, W. D., Rodgers, P., Bailey, C. & de Saint Leger, O. (eds.). Institute of Electrical and Electronics Engineers, 6813785

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Fatigue design methodology of reinforced engineering thermoplastics

    Maier, J., Mösenbacher, A. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  46. Published

    Fatigue enhancement of thin-walled high-strength steel joints by high frequency mechanical impact treatment

    Leitner, M., Stoschka, M. & Eichlseder, W., 2014, In: Welding in the world. 58, p. 29-39

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Fitness-for-Purpose and Damage Tolerance: Applications in Transportation and Energy Systems

    Gänser, H.-P., Tichy, R., Maierhofer, J., Horn, A. & Maier, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 375-379

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    FKM-konformer Ermüdungsfestigkeitsnachweis bei nichtproportionalen Beanspruchungen

    Leitner, B., Fiedler, M. & Leitner, M., 2014, In: Konstruktion. 09, p. 76-82

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Forschungsgruppe „Betriebsfestigkeit – Technologische Prozesse“

    Leitner, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Fundamental Influences on Quasistatic and Cyclic Material Behavior of Short Glass Fiber Reinforced Polyamide Illustrated on Microscopic Scale

    Brunbauer, J., Pinter, G., Mösenbacher, A. & Guster, C., 2014, In: Journal of Applied Polymer Science. 131, p. 1-14

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Grundlagenversuche mit Proben aus AlSi9Cu3 Lenkgehäusen

    Maderbacher, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Integration of Phase-Dependent Work-Hardening into Transient Weld Simulation

    Stoschka, M., Ottersböck, M. & Leitner, M., 2014, Proceedings of the Ninth International Conference on Engineering Computational Technology. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...9 10 11 12 13 14 15 16 ...28 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401