Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

451 - 500 out of 1,629Page size: 50

Research output

  1. 2017
  2. Published

    Deformation mechanisms in uniaxial-oriented semi-crystalline PET-films as a function of orientation to tensile direction

    Popovski, G., Feuchter, M. & Maier, G. A., 11 Oct 2017, In: Journal of polymer science : B, Polymer physics. 56.2018, 2, p. 159-169 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    LEBENSDAUERBERECHNUNG - KONZEPTE FÜR PROZESSABHÄNGIGE MATERIALIEN AM BEISPIEL FASERVERSTÄRKTER KUNSTSTOFFE

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grün, F., 11 Oct 2017. 16 p.

    Research output: Contribution to conference › Poster › Research

  4. Published

    LEBENSDAUERBERECHNUNG - KONZEPTE FÜR PROZESSABHÄNGIGE MATERIALIEN AM BEISPIEL FASERVERSTÄRKTER KUNSTSTOFFE

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grün, F., 11 Oct 2017, (R)Evolution des Antriebs - Auswirkungen auf die Betriebsfestigkeit der Bauteile in der Wirkungskette. 44 ed. Berlin, Vol. DVM_Arbeitskreis Betriebsfestigkeit. 16 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Optimum Chip-Tape Adhesion for Reliable Pickup Process

    Omazic, M., Tscharnuter, D., Oreski, G., Pinczolits, M., Nikac, N., Rappmund, A., Erceg, M. & Pinter, G., 19 Sept 2017, In: IEEE Transactions on Components, Packaging and Manufacturing Technology. 7.2017, 12, p. 2057-2065 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Experimental methods to characterize the nonlinear elastic plastic fracture behaviour of polymers, as a starting point for the description of multi-layered structures

    Gosch, A., Arbeiter, F. & Pinter, G. G., 10 Sept 2017.

    Research output: Contribution to conference › Abstract

  7. Published

    Material behavior of carboxylated nitrile butadiene rubber (XNBR) in dependence on crosslinker and medium

    Fleischmann, D. D., Arbeiter, F., Schlögl, S. & Kern, W., 5 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  8. E-pub ahead of print

    Influence of cooling rate and annealing on the DSC Tg of an epoxy resin

    Tao, Q., Pinter, G. & Krivec, T., 27 Jul 2017, (E-pub ahead of print) In: Microelectronics Reliability. 78.2017, November, p. 396-400 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P., Stelzer, S., Scheiblhofer, S., Cespedes-Gonzales, G., Pfeifer, S., Rittenschober, B., Sieberer, M., Lauermann, M. & Schledjewski, R., 7 Jul 2017.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    High performance green composites for green technologies

    Schledjewski, R., Lloret Pertegas, S., Blößl, Y., Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G., 6 Jul 2017, Key Engineering Materials. Trans Tech Publications, Vol. 742. p. 271-277 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. E-pub ahead of print

    Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing

    Spörk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F. & Holzer, C., 4 Jul 2017, (E-pub ahead of print) In: Macromolecular materials and engineering. 302.2017, 10, 13 p., 1700143.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)

    Spörk, M., Arbeiter, F., Cajner, H., Sapkota, J. & Holzer, C., 26 Jun 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134.2017, 41, 15 p., 45401.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Accelerated Tests for Lifetime Prediction of PE-HD Pipe Grades

    Nezbedová, E., Pinter, G. G., Frank, A., Hutař, P., Poduška, J. & Hodan, J., 22 Jun 2017, In: Macromolecular Symposia. 373.2017, 1, 8 p., 1600096.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of Thermo-Oxidative Ageing of HNBR in Oil Field Applications

    Balasooriya, W., Schrittesser, B. C., Karunakaran, S., Schlögl, S., Pinter, G. G., Schwarz, T. & Kadar, Z., 22 Jun 2017, In: Macromolecular Symposia. 373.2017, 1, 16 p., 1600093.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Crosslinking and post-crosslinking of ethylene vinyl acetate in photovoltaic modules

    Oreski, G., Rauschenbach, A., Hirschl, C., Kraft, M., Eder, G. C. & Pinter, G. G., 15 Jun 2017, In: Journal of Applied Polymer Science. 134.2017, 23, 9 p., 44912.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Applicability of technical biopolymers as absorber materials in solar thermal collectors

    Klein, A., Oreski, G. & Resch-Fauster, K., 1 Jun 2017, (E-pub ahead of print) In: Solar energy. 153.2017, 1 September, p. 276-288 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Effect of cyclic fatigue on the fracture toughness of Polyoxymethylene

    Ramoa, B., Berer, M., Schwaiger, M. & Pinter, G. G., 31 May 2017, In: Journal of Physics: Conference Series. 2017, 843, p. 168-176 9 p., 012052.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS

    Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 May 2017, ANTEC® 2017. Anaheim, California, USA, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Influence of long-term annealing on residual stress distribution and quasi-brittle failure properties of talcum reinforced pipe grade polypropylene

    Arbeiter, F., Pinter, G. & Frank, A., 9 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  20. Published

    Characterization of slow crack growth resistance of polyethylene pipe grades with cyclic cracked round bar (CRB) test in correlation to strain hardening (SH) test

    Berger, I. J., Frank, A., Arbeiter, F. & Pinter, G., 8 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    The Cyclic Cracked Round Bar Test as a new standard for accelerated material ranking of polyethylene pipe grades

    Frank, A., Berger, I. J., Arbeiter, F. & Pinter, G., 8 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  22. Published

    Properties of glass filled polypropylene for Fused Filament Fabrication

    Spörk, M., Savandaiah, C., Arbeiter, F., Schuschnigg, S. & Holzer, C., May 2017.

    Research output: Contribution to conference › Paper › peer-review

  23. Published

    Spritzgusssimulation als Basis optimierter Bauteile

    Primetzhofer, A., Stadler, G. & Pinter, G. G., 20 Apr 2017.

    Research output: Contribution to conference › Paper

  24. Published

    Spritzgusssimulation als Basis optimierter Bauteile

    Primetzhofer, A., Stadler, G. & Pinter, G. G., 20 Apr 2017.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Comparison of different microclimate effects on the aging behavior of encapsulation materials used in photovoltaic modules

    Ottersböck, B., Oreski, G. & Pinter, G. G., 1 Apr 2017, In: Polymer Degradation and Stability. 138.2017, April, p. 182-191 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 263-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Bio-basierte Verbundwerkstoffe

    Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  28. Published

    Fatigue Analysis of Continuously Carbon Fiber Reinforced Laminates

    Maier, J., Pinter, G. G., Gaier, C. & Fischmeister, S., 28 Mar 2017, In: SAE International Journal of Engines. 10.2017, 2, p. 305-315 11 p., 2017-01-0327.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Hybride Verbundwerkstoffe: Potenziale und Herausforderungen

    Hergan, P., Fauster, E., Stelzer, S., Pinter, G. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  30. E-pub ahead of print

    Finite element study of mode I crack opening effects in compression-loaded cracked cylinders

    Berer, M., Mitev, I. & Pinter, G. G., 10 Mar 2017, (E-pub ahead of print) In: Engineering Fracture Mechanics. 175.2017, 15 April, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Einfluss der Alterung auf HNBR in der Erdölindustrie

    Balasooriya, W., Schrittesser, B., Pinter, G. G. & Schwarz, T., 1 Mar 2017, In: GAK : Gummi, Fasern, Kunststoffe. 70.2017, 3, p. 168-176 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Photo-responsive thiol-ene networks for the design of switchable polymer patterns

    Radl, S. V., Schipfer, C., Kaiser, S., Moser, A., Kaynak, B., Kern, W. & Schlögl, S., 31 Jan 2017, In: Polymer Chemistry. 8.2017, 9, p. 1562-1572 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Inkjet Printing of Soft, Stretchable Optical Waveguides through the Photopolymerization of High-Profile Linear Patterns

    Samusjew, A., Kratzer, M., Moser, A., Teichert, C. & Krawczyk, K., 17 Jan 2017, In: ACS Applied Materials & Interfaces. 9.2017, 5, p. 4941-4947 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Analyse des Risswachstumsverhaltens von Polybuten und vernetztem Polyethylen mittels dem zyklischen Cracked Round Bar- Test

    Höller, D., 2017

    Research output: Thesis › Master's Thesis

  35. Published

    Concept of Optimized Encapsulant Composition for PV Module Reliability under Different Climatic Conditions

    Mihaljevic, A., Oreski, G., Eder, G. C., Voronko, Y., Mühleisen, W., Neumaier, L., Hirschl, C., Ebner, R. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Delamination properties of hybrid steel- carbon composite materials produced via resin transfer molding

    Stelzer, S., Brandstetter, D., Hergan, P., Fauster, E. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Design and manufacturing of high performance green composites based on renewable materials

    Resch-Fauster, K., Klein, A., Lloret Pertegas, S. & Schledjewski, R., 2017, Handbook of Composites from Renewable Materials, Vol. 2, Design and Manufacturing. Wiley-VCH , p. 1-24

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  38. Published

    Examination of J-Integral methods and their applicability to tough polypropylene materials

    Gosch, A., 2017

    Research output: Thesis › Master's Thesis

  39. Published

    Fibre-reinforced polyamides and the influence of water absorption on the mechanical and thermomechanical behaviour

    Guttmann, P. & Pilz, G., 2017, Deformation and Fracture Behaviour of Polymer Materials. Springer Berlin, Vol. 247. p. 377-388 12 p. (Springer Series in Materials Science; vol. 247).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  40. Published

    Finite element study of mode I crack opening effects in compression-loaded cracked cylinders

    Berer, M., Mitev, I. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Fretting wear behavior of thermoplastic polyurethane (TPU)

    Wang, C., Hausberger, A., Pinter, G. G., Grun, F. & Schwarz, T., 2017, Proceedings WTC 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Gegenüberstellung realer und simulierter Versagenszeiten von Elektroschweißmuffen aus Polyethylen

    Berger, I. J., Frank, A., Nitsche, D., Petry, D. & Pinter, G. G., 2017, In: Joining plastics=Fügen von Kunststoffen. 11.2017, 3-4, p. 158-164 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Influence of Backsheet Type on Formation of Acetic Acid in PV Modules

    Mihaljevic, A., Oreski, G. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Influence of residual stress on the results of CRB test

    Poduška, J., Hutar, P., Frank, A., Kucera, J., Sadílek, J., Pinter, G. & Náhlík, L., 2017, p. 268-269. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  45. Published

    Influence of the Surface Pretreatment on the Durability of Adhesively Bonded Composite Repairs

    Röper, F., Wolfahrt, M., Horejsi, K., Kucher, G., Bubestinger, A. & Pinter, G. G., 2017, Proceedings ICCM 21. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Investigating Photocurable Thiol-Yne Resins for Biomedical Materials

    Oesterreicher, A., Moser, A., Edler, M., Griesser, H., Schlögl, S., Pichelmayer, M. & Grießer, T., 2017, In: Macromolecular materials and engineering. 302.2017, 5, 9 p., 1600450.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Mikrostrukturoptimierung und Struktur-Eigenschaftsbeziehungen von duromeren Nanoverbunden

    Moser, A., 2017

    Research output: Thesis › Doctoral Thesis

  48. Published

    Natural and artificial weathering tests of polymer films used in solar applications

    Ottersböck, B., 2017

    Research output: Thesis › Doctoral Thesis

  49. Published

    Polymere Werkstoffe zur Steigerung der Ressourceneffizienz: Entwicklung, Charakterisierung und Anwendung

    Resch-Fauster, K., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  50. Published

    Thermotropic overheating protection for façade-integrated solar thermal collectors

    Resch-Fauster, K., Weber, A., Holper, S. & Grobbauer, M., 2017, In: Solar energy materials and solar cells. 170.2017, October, p. 39-47 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Thoughts on the scatter seen in cyclic Mode I fatigue delamination growth in DCB tests

    Mujtaba, A., Stelzer, S., Brunner, A. J. & Jones, R., 2017, In: Composite structures. 160.2017, 15 January, p. 1329-1338 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...6 7 8 9 10 11 12 13 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101