Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

1151 - 1200 out of 1,629Page size: 50

Research output

  1. 2009
  2. Published

    Special topics of polymer science and advanced characterization methods, WP Report Ramanspektroskopie und Ramanmikroskopie

    Wallner, G., Lang, R. & Fischer, J., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Standardisierte Zugprüfungen an Polypropylen/Algen-compounds

    Feuchter, M. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Structure-property correlations of flexible clear coats

    Buder-Stroisznigg, M., Wallner, G., Strauß, B. & Jandel, L., 2009, In: Progress in organic coatings. 65, p. 328-332

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Thermische Charakterisierung von POM-Bauteilen

    Pilz, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Thermische Untersuchungen an glasfaserverstärkten PA-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Thermische Untersuchungen an PA-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Thermoanalytical investigation of a sieve residue - project: Jiwi Kamai

    Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Thermoanalytical investigation of a sieve residue - project: Portucal Viana PM1

    Wallner, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Thermoanalytical investigation of a thermoset sample - project: Florence USA 09

    Wallner, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Thermoanalytical investigation of a thermoset sample - project: Portucal Viana PM1

    Wallner, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Thermoanalytical investigation of a thermoset sample - project: Stora PH PM2 09

    Wallner, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Thermo mechanical characterization of PE and PP materials

    Pilz, G., Pinter, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Thermomechanische und bruchmechanische Eigenschaften nanopartikelverstärkter Epoxidharze

    Stadelmann, S., 2009

    Research output: Thesis › Master's Thesis

  15. Published

    Thermotropic layers for flat-plate collectors - A review of various concepts for overheating protection with polymeric materials

    Resch, K. & Wallner, G., 2009, In: Solar energy materials and solar cells. 93, p. 119-128

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Utilizing unbleached cellulosic fibres in polypropylene matrix composites for injection moulding applications

    Burgstaller, C., Rüf, W., Stadlbauer, W., Pilz, G. & Lang, R., 2009, In: Journal of biobased materials and bioenergy. p. 226-231

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Wärmeausdehnung GFK

    Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Zug- und Biegeprüfung eines Polymerbeton-Verbundwerkstoffes

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Zyklische Risswachstumsversuche an CRB-Proben als Qualitätssicherungstest zur Abschätzung des Langzeitverhaltens von PE-Rohrwerkstoffen

    Redhead, A., 2009, 74 p.

    Research output: Thesis › Master's Thesis

  20. 2008
  21. Published

    2. Leobener Symposium "SOLARTECHNIK - Neue Möglichkeiten für die Kunststoffbranche

    Lang, R. (Editor) & Wallner, G. (Editor), 2008, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  22. Published

    Accelerated investigation of creep crack growth in polyethylene pipe grade materials by the use of fatigue tests on cracked round bar specimens

    Frank, A., Pinter, G. & Lang, R., 2008, ANTEC 2008 Society of Plastics Engineers' Annual Technical Conference. p. 2435-2439

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Aging behavior of polymeric solar thermal absorber materials

    Kahlen, S. & Wallner, G., 2008, Aging behavior of polymeric solar thermal absorber materials. Montanuniversität Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. XII-1-XII-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Aging mechanisms of polymeric films for PV encapsulation

    Oreski, G. & Wallner, G., 2008, Aging mechanisms of polymeric films for PV encapsulation. Montanuniversität Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. XXII-1-XXII-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Analog triggered image acqusition method for optical measurement under cyclic load conditions

    Vezer, S. T. & Major, Z., 2008, In: Materials engineering. 15, 1, p. 5-13

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Analyse spezieller Zugversuchsergebnisse aus der Projektphase I

    Pilz, G. & Rausch-Schott, O., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Analysis of coloring of PP containers

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    A novel methodology for the evaluation of distinctness of image of glossy surfaces

    Gruber, D., Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2008, In: Progress in organic coatings. 63, p. 377-381

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    A novel qualification procedure for lifetime and safety assessment of PE pressure pipes for arbitrary installation conditions

    Frank, A., Pinter, G. & Lang, R., 2008, Plastics Pipes XIV (CD). p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    A test procedure for extruded polymeric solar thermal absorbers

    Olivares, A., Rekstad, J., Meir, M., Kahlen, S. & Wallner, G., 2008, In: Solar energy materials and solar cells. 92, p. 445-452

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Characterisation of the failure behavior of elastomer composites

    Major, Z., Kajtna, A., Kovacevic, Z., Mesec, A. & Kosir, M., 2008, ASPM 2008. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Characterisation of the fracture behavior of NBR and FKM grade elastomers for oilfield applications

    Major, Z. & Lang, R., 2008, Multilevel Approach to Fracture of Materials, Components and Structures. p. 228-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Characterization and Simulation of the Deformation Behaviour of Elastomer Particle filled Polypropylene Compounds

    Wang, E., 2008, 98 p.

    Research output: Thesis › Master's Thesis

  34. Published

    Characterization of silicon based thermoplastic elastomer for PV encapsulation

    Oreski, G., Wallner, G. & Randel, P., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Characterization of silicon based thermoplastic elastomer for PV encapsulation

    Oreski, G., Wallner, G. & Randel, P., 2008, EU PV SEC 08. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Characterization of the effects of preforming and redeforming on morphology and thermo-mechanical properties of polyethylene close-fit liners for trenchless pipe rehabilitation

    Frank, A., Mannsberger, G., Pinter, G. & Lang, R., 2008, ANTEC 2008 Society of Plastics Engineers' Annual Technical Conference. p. 2251-2255

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Characterization of the Fracture and Fatigue Behavior of Elastomer Composites

    Major, Z. & Lang, R., 2008, EUROMECH Colloquium 502. p. 71-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Characterization of the impact tensile behavior of glass fibre reinforced polyamide (PA-GF) Materials

    Major, Z. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Characterization of the magnetorheologica behavior of elastomers

    Schrittesser, B., Major, Z. & Filipcsei, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Characterization of the magnetorheological behavior of fluids and elastomeers

    Major, Z., Filipcsei, G. & Zrinyi, M., 2008, ASPM 2008. p. 41-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Characterization of the property profile of old PE gas pipes in service for up to 30 years

    Frank, A., Podingbauer, T., Liedauer, S., McCarthy, M., Haager, M. & Pinter, G., 2008, Plastics Pipes XIV (CD). p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Characterization of the tensile behavior of glass fiber reinforced polyamide materials (PA-LGF) at high loading rates

    Major, Z. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Charakterisierung des Risswachstumsverhaltens von Cracked Round Bar (CRB) Prüfkörpern auf Basis der Materialnachgiebigkeit

    Freimann, W., 2008

    Research output: Thesis › Master's Thesis

  44. Published

    Cross-linking behavior of UV-curable acrylate resins

    Wallner, G., Resch, K. & Lang, R., 2008, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. p. 2-14

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Crosslinking reactions and network structure in UV-curable acrylate resins

    Resch, K. & Wallner, G., 2008, ASPM 2008 - 9th Austrian Polymer Meeting. p. 17-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Deformation Analysis Of Impact Loaded Composites

    Fuchs, P., Major, Z. & Lang, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Determination of bearing strength of composites by bold bearing configuration

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Feuchter, M., Maier, G. A., Pinter, G., Kracalik, M., Laske, S. & Langecker, G. R., 2008, Materials Research Society Symposium Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Determination of interlaminar fracture toughness energy values according to pr DIN EN 6033

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Development an implementation of a novel tribological test method and characterisation of TPU materials

    Hausberger, A., Bruckmoser, K. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Development an implementation of a novel tribological test method and characterization of TPU materials

    Hausberger, A., Bruckmoser, K. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Development of an in plane biaxial test setup for monotonic and cyclic tests

    Vezer, S. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...20 21 22 23 24 25 26 27 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101