Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

1101 - 1150 out of 1,629Page size: 50

Research output

  1. 2009
  2. Published

    Computational and experimental simulation of delamination in L-shaped laminated composite components

    Wimmer, G., Kitzmüller, W., Pinter, G., Wettemann, T. & Pettermann, H. E., 2009, In: Engineering Fracture Mechanics. 76, p. 2810-2820

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Crack growth in polyethylene (PE-HD) - from macroscopic failure to molecular failure mechanisms

    Lang, R., Pinter, G., Frank, A. & Haager, M., 2009, EPF'09 European polymer congress. p. 121-121

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Determination of material parameters for hyperelastic material models for two elastomer grades

    Major, Z. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, Final Report

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Analyse von Lackkomponenten, Lackfilmen und bandbeschichteten Blechen

    Wallner, G., Fischer, J., Buder-Stroisznigg, M. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Charakterisierung von Lackfilmen und bandbeschichteten Blechen

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Herstellung von Lacken

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Herstellung von Lackfilmen und beschichteten Blechen

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Development of a standardized procedure for the characterization of interlaminar crack growth in advanced composites under fatigue mode i loading conditions

    Brunner, A. J., Murphy, N. & Pinter, G., 2009, In: Engineering Fracture Mechanics. 76, p. 2678-2689

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Diverse Messungen an Polypropylen-Talk Compounds

    Pinter, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Druckprüfung nach ASTM D3410 an Composite Proben

    Pinter, G. & Payer, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Dynamisch-Mechanische Analyse (DMA) an PMMA-Folien

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Dynamisch-Mechanische Analyse (DMA) von Folienwerkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Dynamisch-Mechanische Analyse (DMA) von Thermoplastwerkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Dynamisch mechanische Analyse von Epoxidharzen

    Guttmann, P., 2009

    Research output: Thesis › Master's Thesis

  17. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, Final Report

    Wallner, G., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Analyse und Charakterisierung von Bauteilen

    Fischer, J., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Analyse und Charakterisierung von Rohstoffen und Halbzeugen

    Fischer, J., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Herstellung von Rohstoffen, Halbzeugen und Bauteilen

    Fischer, J., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Effect of polymer matrix on quasi-static and fatigue filled hole tension and compression tests in liquid moulding non-crimp fabric composites

    Pinter, G., Wolfahrt, M. & Kuntz, J., 2009, Sampe Europe 30 th Intern. Jubilee Conference and Forum. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Effect of preform architecture on the mechanical and fatigue behavior of braided compositess for generating design allowables

    Wolfahrt, M., Pinter, G., Zaremba, S., Reden, von, T. & Ebel, C., 2009, Sampe Europe 30 th Intern. Jubilee Conference and Forum. p. 271-276

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Evaluation of the aging behavior of ethylene copolymer films for solar applications under accelerated weathering conditions

    Oreski, G. & Wallner, G., 2009, In: Solar energy. 83, p. 1040-1047

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Fatigue Behaviour of Filled Polypropylene

    Grinschgl, M., 2009, 92 p.

    Research output: Thesis › Master's Thesis

  25. Published

    Fatigue propagation test development for polymer-matrix fibre-reinforced laminates

    Brunner, A., Paris, I. & Pinter, G., 2009, 12th International Conference on Fracture, ICF 13. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled pp composites under tension

    Jerabek, M., Major, Z. & Lang, R., 2009, Euro Fillers 2009. p. 18-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Flexible clear coats - Effect of curing conditions

    Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2009, In: Progress in organic coatings. 65, p. 44-48

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influence of filler surface modification on fracture mechanics of polypropylene / calcium carbonate compounds

    Feuchter, M., Pinter, G., Reisecker, V., Knerr, M. & Pham, T., 2009, Euro Fillers 2009. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Influence of the cure time on the apparent interlaminar shear strength of the toughened resin transfer moulding system PRIFORM© at a cure temperature of 180 °C

    Wolfahrt, M. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    In-line quality control of polymer nanocomposites using near-infrared spectroscopy

    Laske, S., Witschnig, A., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Langecker, G. R. & Holzer, C., 2009, NANOCON 2009 - 1st International Conference, Conference Proceedings. p. 120-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Kunststoffe unter der Sonne

    Meir, M., Brunold, S., Fischer, S., Kahlen, S., Köhl, M., Ochs, F., Peter, M., Resch, K., Wallner, G., Weiß, K.-A. & Wilhelms, C., 2009, In: Erneuerbare Energie. p. 14-16

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Langzeitversagen von thermoplastischen Rohrwerkstoffen

    Pinter, G. & Frank, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Lifetime prediction of polyethylene pipes based on an accelerated extrapolation concept for creep crack growth with fatigue tests on cracked round bar specimens

    Frank, A., Pinter, G. & Lang, R., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2169-2174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Lifetime Prediction of the Fatigue crack growth (FCG) of high density polyethylene (HDPE) by crack layer theory

    Choi, B.-H., Balika, W., Chudnovsky, A., Pinter, G. & Lang, R., 2009, In: Polymer engineering and science. 49, p. 1421-1428

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Materialidentifizierung von Motorhauben

    Oreski, G. & Wallner, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Mechanische Charakterisierung von CFK-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Mechanische und thermo-mechanische Charakterisierung von PA-Werkstoffen

    Pilz, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Methodenentwicklung zur Charakterisierung des Stick-Slip-Verhaltens von TPU-Materialien

    Hausberger, A., 2009

    Research output: Thesis › Master's Thesis

  39. Published

    Morphologie von Polymerwerkstoffen - Analyse von Polyethylenlaufflächen und duromeren Bandbeschichtungen

    Fischer, J., 2009

    Research output: Thesis › Doctoral Thesis

  40. Published

    Morphology of phase-separated thermotropic layers based on UV cured acrylate resins

    Resch, K. & Wallner, G., 2009, In: Polymers for Advanced Technologies. 20, 12, p. 1163-1167

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Numerical simulation of the failure behavior of PE pressure pipes with additional loads

    Hutar, P., Sevcik, M., Nahlik, L., Mitev, I., Frank, A. & Pinter, G., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2163-2168

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Numerical simulation of the failure behavior of PE pressure pipes with additional loads

    Hutar, P., Sevcik, M., Nahlik, L., Mitev, I., Frank, A. & Pinter, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Optimierung des Messaufbaus einer neuartigen Methode zur visuellen Charakterisierung des Erscheinungsbildes von Kunststoffoberflächen

    Baumann, A., 2009, 100 p.

    Research output: Thesis › Master's Thesis

  44. Published

    Phase separated thermotropic layers based on UV cured acrylate resins – Effect of material formulation on overheating protection properties and application in a solar collector

    Resch, K., Wallner, G. & Hausner, R., 2009, In: Solar energy. p. 1689-1697

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Polymere Faserverbundwerkstoffe für Luftfahrtanwendungen

    Pinter, G. & Wolfahrt, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Polymeric Materials for Solar Thermal Applications - Endbericht

    Wallner, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Prediction of the remaining lifetime of polyethylene pipes after up to 30 years in use

    Frank, A., Pinter, G. & Lang, R., 2009, In: Polymer Testing. 49, p. 737-745

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Ranking of PE pipe materials

    Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Special topics of polymer science and advanced characterization methods, Final Report

    Wallner, G., Fischer, J., Oreski, G., Resch, K. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Special topics of polymer science and advanced characterization methods, WP Report Fortschrittliche IR Spektroskopie

    Oreski, G., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Special topics of polymer science and advanced characterization methods, WP Report Fortschrittliche Rasterkraftmikroskopie

    Resch, K., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...19 20 21 22 23 24 25 26 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101