Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

851 - 900 out of 1,631Page size: 50

Research output

  1. 2013
  2. Published

    Zyklische Prüfung von Rohrverbindungen

    Stelzer, S. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. 2012
  4. Published

    Comparison of long-term-properties of polyolefin pipe grades using linear elastic fracture mechanics

    Arbeiter, F., Sept 2012.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Delamination Fatigue Testing of Continuous Fiber Composites

    Brunner, A. & Stelzer, S., 28 May 2012.

    Research output: Contribution to conference › Presentation › Research

  6. Published

    Influence of fiber placement and architecture on fracture mechanical properties of carbon fiber reinforced composites

    Stelzer, S., Schillfahrt, C., Wolfahrt, M., Pinter, G., Noisternig, J. & Frieß, S., 24 May 2012.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    Towards a standardized test method for mode I fatigue crack growth in unidirectional fiber reinforced polymer composites

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 19 Apr 2012.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Towards a standardized test method for mode I fatigue crack growth in unidirectional fiber reinforced polymer composites

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 18 Apr 2012, Proc. 3rd Fatigue Symposium, Leoben, Austria.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Accelerated characterization of the resistance against crack initiation and slow crack growth of polyethylene for geomembrane application under the influence of media

    Redhead, A., Frank, A. & Pinter, G., 2012, 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012. p. 1250-1255 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Accelerated Investigation of Media Impact on Polyethylene Geomembranes

    Redhead, A., Frank, A. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Accelerated investigation of the effect of chlorine dioxide on the long-term failure behavior and the material aging of polyethylene for raised temperature resistance

    Redhead, A., Frank, A. & Pinter, G., 2012, Proceedings of Plastic Pipes XVI Conference 2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Accelerated investigation of the media resistance of polyethylene for geomembrane application

    Redhead, A., Frank, A. & Pinter, G., 2012, Proceedings of ANTEC 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Accelerated material ranking with cyclic CRB tests

    Frank, A., Redhead, A., Kratochvilla, T., Dragaun, H. & Pinter, G., 2012, Proceedings of Plastic Pipes XVI Conference 2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Analysis of molecular and morphological effects on slow crack growth in modern PE Pipe grades by cyclic fracture mechanics tests

    Redhead, A., Pinter, G. & Frank, A., 2012, In: Macromolecular Symposia. 311, p. 41-48

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Analysis of the process zone and the mechanism of slow crack growth initiation in high density polyethylene with accelerated cyclic tests

    Redhead, A., Pinter, G. & Frank, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    A pressure-dependent schapery model for polyoxymethylene

    Tscharnuter, D., Gastl, S. & Pinter, G., 2012, Proceedings of SEM Annual Conference. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Bestimmung ausgewählter mechanischer Eigenschaften sowie der monotonen und zyklischen interlaminaren Risszähigkeit von gewickelten und geflochtenen Kohlenstofffaserverbundwerkstoffen

    Schillfahrt, C., 2012

    Research output: Thesis › Master's Thesis

  18. Published

    Bestimmung der Glasübergangstemperaturen an co-extrudierten Platten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Bestimmung der Kraft-Deformationsverläufe an unterschiedlichen Möbelverbundfolien

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Bestimmung der Kraft-Deformtionsverläufe an unterschiedlichen Möbelverbundfolien

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Bestimmung des Einflusses von chemischen Parametern auf grundlegende Materialeigenschaften von H-NBR Elastomeren

    Maier, A., 2012

    Research output: Thesis › Master's Thesis

  22. Published

    Bestimmung des linearen thermischen Ausdehnungskoeffizienten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Characterization and Simulation of the Deformation and Failure Behavior of Printed Circuit Boards (PCB)

    Fuchs, P., 2012

    Research output: Thesis › Doctoral Thesis

  24. Published

    Characterization of the temperature dependent fracture behavior of HNBR based elastomers used in oil and gas industry

    Schrittesser, B., Pinter, G., Schwarz, G., Nagy, T. & Major, Z., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Charakterisierung der oxidativen Wirkung von Chlordioxid auf Polyethylen für Hochtemperaturanwendungen

    Strecher, V., 2012

    Research output: Thesis › Master's Thesis

  26. Published

    Charakterisierung des Bauteilverhaltens von Hydraulikschläuchen unter hochfrequenter Belastung

    Aglassinger, S., 2012

    Research output: Thesis › Master's Thesis

  27. Published

    Comparison of accelerated tests for PE grades lifetime assessment

    Frank, A., Pinter, G., Kapur, M. & Nezbedová, E., 2012, Proceedings of Plastic Pipes XVI Conference 2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Comparison of long-term-properties of polyolefin pipe grades using linear elastic fracture mechanics

    Arbeiter, F., Frank, A. & Pinter, G., 2012, proceedings of Plastic Pipes XVI Conference 2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Composite-Composite joining with enhanced damage toleranCe (CoJEC)

    Stelzer, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Consideration of viscoelastic properties of polymers for materials selection

    Guttmann, P., Pilz, G. & Röper, F., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Cyclic interlaminar crack growth in unidirectional and braided composites

    Stelzer, S., 2012, Fatigue behaviour of fiber reinforced polymers. p. 49-63

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  32. Published

    Damage tolerance of fiber reinforced polymer composites

    Stelzer, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Determination of the orthotropic material properties of individual layers of printed circuit boards

    Fuchs, P. F., Pinter, G. & Tonejc, M., 2012, In: Microelectronics Reliability. 52, 11, p. 2723-2730

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Different methodologies to characterize the slow crack growth resistance of polyethylene pipe grades

    Frank, A., Pinter, G., Adib, A., Dominguez, C., Carcia, R. A. & Rodriguez, J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Effect of heat ageing on the morphology of thermoplastic polyurethanes

    Bruckmoser, K. & Resch, K., 2012, 15th Intern. Conference P2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Effect of temperature-cycling on the morphology of polymeric thermotropic glazings for overheating protection applications

    Weber, A. & Resch, K., 2012, In: Journal of polymer research. 19, 6, p. 5-8

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Fracture mechanical testing of PE under the impact of liquid media

    Redhead, A. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Fraktografische und mechanische Analyse von bandbeschichteten Blechen

    Kregl, L., 2012, 82 p.

    Research output: Thesis › Master's Thesis

  39. Published

    Functional polymeric materials for solar thermal applications

    Resch, K., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Hochleistungs-Faserverbundwerkstoffen auf Polyurethanharzbasis

    Gloggnitzer, S., Pilz, G. & Buchsteiner, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Influence of fiber placement and architecture on fracture mechanical properties of carbon fiber reinforced composites

    Stelzer, S., Schillfahrt, C., Wolfahrt, M., Pinter, G., Noisternig, J. & Frieß, S., 2012, Proc. National Sampe Conference & Exhibition. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Investigation of Concepts Describing the Influence of Stress Concentration on the Fatigue Behaviour of Short Glass Fibre Reinforced Polyamide

    Eichlseder, W., Mösenbacher, A., Guster, C. & Pinter, G., 2012, Proceedings of the 15th European Conference on Composite Materials. Venice

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Investigation of the slow crack growth behavior of static and cyclic loaded specimens of polyethylene by 2D and 3D optical fracture surface analysis

    Andreas, F., Bruckmoser, K., Redhead, A., Gruber, D. P. & Pinter, G., 2012, In: Macromolecular Symposia. 311, p. 103-111

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Kompaktierungs- und Ermüdungsverhalten von RTM-Laminaten

    Ladstaetter, E. M., 2012, 151 p.

    Research output: Thesis › Doctoral Thesis

  45. Published

    Kunststofftechnik Leoben: Rohrexpertise in Spanien Präsentiert

    Arbeiter, F., Pinter, G., Redhead, A. & Frank, A., 2012, In: VLK-News. p. 18-18

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Lifetime prediction of multi-layer polyolefin pipes

    Arbeiter, F. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Lifetime prediction of polyethylene pipes

    Frank, A. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Material- und Rissanalyse von Kunststoffkanülen aus LDPE

    Resch, K. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Mechanische Eigenschaften von Epoxidharz-Faserverbundwerkstoffen in Abhängigkeit vom Aushärtungsgrad

    Karpf, R. J., 2012, 73 p.

    Research output: Thesis › Master's Thesis

  50. Published

    Mechanische Kennwertermittlung von unterschiedlichen Thermoplasten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Mechanische und thermische Charakterisierung von sieben verschiedenen glasfaserverstärkten Polymeren

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Development of a standardized test procedure

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 2012, In: Composites science and technology. 72, p. 1102-1107

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...14 15 16 17 18 19 20 21 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101