Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

801 - 850 out of 1,629Page size: 50

Research output

  1. 2013
  2. Published

    Bestimmung der Wasseraufnahme von PBT-Bauteilen

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Bestimmung von Qualitätskriterien für Verpackungsfolien

    Feuchter, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Bruchmechanik an Grenzflächen - Lebensdauervorhersagekonzepte für mehrschichtige Kunststoffkomponenten

    Arbeiter, F., Pinter, G., Lach, R., Grellmann, W. & Hutar, P., 2013, 22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie. p. 228-238

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Comparative Spectroscopic Study of Aged Thermoplastic Polyurethanes

    Bruckmoser, K. & Resch, K., 2013, 19th European Symposium on Polymer Spectroscopy - ESOPS19. p. 41-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Comparison of crack growth kinetics in different polypropylene grades using linear elastic fracture mechanics

    Arbeiter, F., Pinter, G. & Frank, A., 2013, The Proceedings of The Austrian Slovenian Polymer Meeting 2013. p. 62-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Comparison of crack growth kinetics in different polypropylene grades using linear elastic fracture mechanics

    Arbeiter, F., 2013.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Concept for characterisation of fatigue damage and failure of laminated composites by cycle-and stress-dependent stiffness properties

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Concept for evaluating stiffness degradation of composite materials during fatigue life

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  10. Published

    Cure analysis of pultrusion epoxy resin

    Kastanis, D., Feuchter, M., Moser, A., Wolfahrt, M., Pinter, G. & Schledjewski, R., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Deformation and Fracture Behavior of Semi-Crystalline Thermoplastics Used for Rolling Applications

    Berer, M., 2013, 162 p.

    Research output: Thesis › Doctoral Thesis

  12. Published

    Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach

    Berer, M. & Pinter, G., 2013, In: Polymer Testing. 32, p. 870-879

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Dynamisch Mechanische Untersuchung (DMA) an VE-GF

    Guttmann, P. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Effect of formulation and processing conditions on light shielding efficiency of thermotropic systems with fixed domains based on UV curing acrylate resins

    Weber, A., Schlögl, S. & Resch, K., 2013, In: Journal of Applied Polymer Science. 130, p. 3299-3310

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Elevated Pitting Wear of injection molded PEEK rolls

    Berer, M., Major, Z. & Pinter, G., 2013, In: Wear. 297, p. 1052-1063

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Ermüdungsverhalten von glasfaserverstärkten Polyurethanharz-Laminaten

    Buchsteiner, T., 2013

    Research output: Thesis › Master's Thesis

  17. Published

    Evaluation of Raman Spectroscopy to Characterize Heat Ageing in Thermoplastic Polyurethanes

    Bruckmoser, K. & Resch, K., 2013, The Proceedings of The Austrian Slovenian Polymer Meeting 2013. p. 79-80

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Experimentelle Basischarakterisierung einer neuen Fügetechnologie mit erhöhter Schadenstoleranz für endlosfaserverstärkte Kunststoffe

    Unger, T., 2013, 74 p.

    Research output: Thesis › Master's Thesis

  19. Published

    Fatigue properties of polyurethane based high performance composites

    Gloggnitzer, S., Pilz, G. & Buchsteiner, T., 2013, ICSAAM 2013 Proceedings. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    IMPACT OF SINGLE AND DUAL PRESSURE BUTT-WELDING PROCEDURES ON THE RELIABILITY OF PE 100 PIPE WELDS

    Arbeiter, F., Pinter, G. & Frank, A., 2013, Proceedings of Eurotec 2013.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Impact of varying between single and dual pressure butt-welding procedures for small scale pipes on short- and long-term fracture properties of PE 100 pipe welds

    Arbeiter, F., 2013.

    Research output: Contribution to conference › Presentation › Research

  22. Published

    Improvement of light shielding performance of thermotropic glazings by adaption of material composition and curing parameters

    Weber, A. & Resch, K., 2013, Proceedings of the Austrian-Slovenian Polymer Meeting 2013. p. 132-133

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Interface thickness determination of mineral reinforced multilayer polypropylene pipes using Raman spectroscopy

    Arbeiter, F., Bruckmoser, K. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Interlaminar fatigue crack growth in carbon fiber reinforced composites

    Stelzer, S., 2013, Proceedings of the 19th International Conference on Composite Materials. p. 1689-1697

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Investigation of slow crack growth initiation in polyethylene pipe grades with accelerated cyclic tests

    Redhead, A., Frank, A. & Pinter, G., 2013, In: Engineering Fracture Mechanics. 101, p. 2-9

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Investigation of the thermal expansion behaviour of PV module encapsulation materials

    Knausz, M., Oreski, G. & Guttmann, P., 2013, The Proceedings of the Austrian – Slovenian Polymer Meeting 2013. p. 44-46

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Lebensdauerabschätzung von kohlenstofffaserverstärkten Laminaten auf Basis zyklenabhängiger Steifigkeiten

    Brunbauer, J. & Pinter, G., 2013, DVM-Bericht 140. p. 49-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Lebensdauerabschätzung von kohlenstofffaserverstärkten Laminaten auf Basis zyklenabhängiger Steifigkeiten

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Local damage simulations of printed circuit boards based on determined in plane cohesive zone parameters

    Fuchs, P. F., Pinter, G. & Fellner, K., 2013, In: Circuit World. 39, p. 60-66

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Mechanische Kennwertermittlung von unterschiedlichen Thermoplasten

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Mechanische und thermische Charakterisierung von einem glasfaserverstärkten Polymer

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Mode II fatigue delamination resistance of advanced fiber-reinforced polymer–matrix laminates: Towards the development of a standardized test procedure

    Brunner, A., Stelzer, S., Pinter, G. & Terrasi, G. P., 2013, In: International Journal of Fatigue. 50, p. 57-62

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Monotone Zugversuche an ABS

    Hinterdorfer, S. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Monotone Zugversuche an Blechen

    Hinterdorfer, S. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Nanocomposite Hydrogels - Fracture Toughness and Energy Dissipation Mechanisms

    Klein, A., 2013, 115 p.

    Research output: Thesis › Master's Thesis

  36. Published

    New method of characterizing the fatigue behavior of thin films for acoustic applications at high frequencies

    Knapp, G., Oreski, G. & Pinter, G., 2013, 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013. p. 1600-1604 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Non-destructive on-line damage monitoring in composites under fatigue loading

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Novel composite-composite joining technology with through the thickness reinforcement for enhanced damage tolerance

    Stelzer, S., 2013, Proceedings of the 19th International Conference on Composite Materials. p. 4645-4653

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    PCB drop test lifetime assessment based on simulations and cyclic bend tests

    Fuchs, P., Pinter, G. & Major, Z., 2013, In: Microelectronics Reliability. 53, p. 774-781

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Peel Tests zur Untersuchung des Haftungsverhaltens von Einbettungsmaterialien für Photovoltaik-Module

    Haingartner, C., 2013, 87 p.

    Research output: Thesis › Master's Thesis

  41. Published

    Prüfung von Schienenzwischenlagen

    Föttinger, J. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Spectroscopic Characterization of Thermal Degradation in Thermoplastic Polyurethanes

    Bruckmoser, K. & Resch, K., 2013, ICSAAM 2013 Proceedings. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Temperaturabhängige Druckuntersuchungen an Kupplungspaketen

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    The effect of residual stress on polymer pipe lifetime

    Hutar, P., Sevcik, M., Andreas, F., Nahlik, L., Kucera, J. & Pinter, G., 2013, In: Engineering Fracture Mechanics. 108, p. 98-108

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    THE IMPACT OF TIME, TEMPERATURE AND MEDIA ON POLYMER SELECTION FOR HIGH DEMAND APPLICATIONS

    Guttmann, P., Röper, F. & Pilz, G., 2013, The Proceedings of the Austrian – Slovenian Polymer Meeting 2013. p. 60-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Thermomechanische Eigenschaften von Hochleistungs-Faserverbundwerkstoffen auf Polyurethanharzbasis

    Gloggnitzer, S., Pilz, G. & Buchsteiner, T., 2013, Tagungsband Verbundwerkstoffe. p. 84-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Thermotropic Glazings: Theoretical and Practical Assessment of Overheating Protection Performance

    Weber, A., Gruber, D. & Resch, K., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Thermotropic overheating protection glazings

    Weber, A., Gruber, D. & Resch, K., 2013, Advances in Polymer Science and Technology 3: Proceedings of a Conference on Polymer Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Zeit-Temperatur-Verschiebung von thermoplastischen polymeren Werkstoffen

    Moser, A., 2013

    Research output: Thesis › Master's Thesis

  50. Published

    Zyklische Prüfung von Rohrverbindungen

    Stelzer, S. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. 2012
  52. Published

    Comparison of long-term-properties of polyolefin pipe grades using linear elastic fracture mechanics

    Arbeiter, F., Sept 2012.

    Research output: Contribution to conference › Presentation › Research

Previous 1...13 14 15 16 17 18 19 20 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101