Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

321 - 340 out of 1,629Page size: 20

Research output

  1. 2019
  2. Published

    High-performance Epoxy Thermoset with 100% Bio-based Carbon Content

    Resch-Fauster, K., Anusic, A. & Mahendran, A. R., 17 Jun 2019.

    Research output: Contribution to conference › Abstract

  3. Published

    Synthesis and thermo mechanical properties of a 100% bio based epoxy resin composite

    Anusic, A., Mahendran, A. R., Blößl, Y. & Resch-Fauster, K., Jun 2019.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Using soft interlayers as crack arrester in polymeric 3D-printed structures

    Arbeiter, F., Spörk, M., Wiener, J., Oesterreicher, F. & Pinter, G. G., 17 May 2019, 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics. p. 1 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Bonded aerospace repairs under tensile loading: Wet chemical surface treatment and selected environmental conditions: Wet chemical surface treatment and selected environmental conditions

    Röper, F., Wolfahrt, M., Schlögl, S., Kucher, G. & Pinter, G., 15 May 2019, In: Journal of Applied Polymer Science. 136.2019, 19, 47506.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Erhöhung der Bruchzähigkeit durch Multischichtaufbau

    Arbeiter, F., Oesterreicher, F., Wiener, J., Spörk, M. & Pinter, G. G., 26 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Anhydride Cured Bio-Based Epoxy Resin: Effect of Moisture on Thermal and Mechanical Properties

    Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G. H., 25 Apr 2019, In: Macromolecular materials and engineering. 304.2019, 7, 9 p., 1900031.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    High-density polyethylene as phase-change material: Long-term stability and aging

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 10 Apr 2019, In: Polymer Testing. 76.2019, July, p. 433-442 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing

    Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C. & Holzer, C., 8 Apr 2019, In: Materials letters. 248.2019, 1 August, p. 165-168 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Relation between degradation of polymeric components in crystalline silicon PV module and climatic conditions: A literature review

    Omazic, A., Oreski, G., Halwachs, M., Eder, G. C., Hirschl, C., Neumaier, L., Pinter, G. & Erceg, M., 1 Apr 2019, In: Solar energy materials and solar cells. 192.2019, April, p. 123-133 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. & Novak, P., 5 Mar 2019, EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging. Institute of Electrical and Electronics Engineers, 8660763. (EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Lifetime assessment of anisotropic materials by the example short fibre reinforced plastic

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 1 Mar 2019, In: International Journal of Fatigue. 120.2019, March, p. 294-302 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Stepped Isothermal Method And Stress Rate Accelerated Creep Rupture Tests For Efficient Creep Investigaton Of Engineering Thermoplastics

    Pilz, G., Guttmann, P., Gloggnitzer, S. & Pinter, G. G., Mar 2019.

    Research output: Contribution to conference › Paper › peer-review

  15. Published

    Fracture Mechanics Lifetime Prediction of Polyethylene Pipes

    Frank, A., Arbeiter, F. J., Berger, I. J., Hutar, P., Náhlík, L. & Pinter, G., 1 Feb 2019, In: Journal of Pipeline Systems Engineering and Practice. 10.2019, 1, 04018030.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Analyzing Thermal Conductivity of Polyethylene‐Based Compounds Filled with Copper

    Weingrill, H., Hohenauer, W., Resch-Fauster, K. & Zauner, C., 9 Jan 2019, In: Macromolecular materials and engineering. 304.2019, 4, 1800644.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    The Effect of the Surface Area of Carbon Black Grades on HNBR in Harsh Environments

    Balasooriya, W., Schrittesser, B., Pinter, G., Schwarz, T. & Conzatti, L., 4 Jan 2019, In: Polymers. 11.2019, 1, 61.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Data set determination for lifetime assessment of short fibre reinforced polymers

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grun, F., 1 Jan 2019, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Datensatzermittlung zur lebensdauervorhersage kurzfaserverstärkter kunststoffe

    Primetzhofer, A., Stadler, G., Grün, F. & Pinter, G., 1 Jan 2019, In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Fatigue characterization of embedded layers in CFR Composites: Fatigue Design 2019, International Conference on Fatigue Design, 8th Edition

    Schneider, C., Drvoderic, M., Pinter, G., Schuecker, C. & Gaier, C., 1 Jan 2019, In: Procedia Structural Integrity. 19, p. 370-379 10 p.

    Research output: Contribution to journal › Conference article › peer-review

Previous 1...13 14 15 16 17 18 19 20 ...82 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101