Chair of Materials Physics (430)

Organisational unit: Chair

1701 - 1750 out of 1,986Page size: 50

Research output

  1. 2006
  2. Published

    Cyclically deformed cellulose films characterized by in situ synchrotron diffraction coupled with tensile tests

    Martinschitz, K.-J., Boesecke, P., Gindl, W. & Keckes, J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Cyclic high-pressure torison of nickel and Armco iron

    Wetscher, F. & Pippan, R., 2006, In: Philosophical magazine. 86, p. 5867-5883

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Damage development during cyclic loading - from micro to macro properties. Bericht 3

    Yang, B. & Dehm, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Damage development during cyclic loading - from micro to macro properties. Bericht 4

    Yang, B. & Dehm, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Determination of Mechanical Properties of Copper at the Micron Scale

    Kiener, D., Motz, C., Schöberl, T., Jenko, M. & Dehm, G., 2006, In: Advanced engineering materials. 8, p. 1119-1125

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    DHS1100 - A new high temperature attachment for multipurpose 4-circle X-ray goniometers

    Resel, R., Keckes, J., Haber, T., Koini, M. & Hofbauer, P., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Differences in structural evolution in single- and dual-phase materials during severe plastic deformation

    Pippan, R., Vorhauer, A., Wetscher, F., Faleschini, M., Hofak, M. & Sabirov, I., 2006, In: Materials Science Forum . 503-504, p. 407-412

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Effect of Large Shear Deformation on Rail Steels and Pure Metals

    Wetscher, F., 2006

    Research output: Thesis › Doctoral Thesis

  10. Published

    Evolution of misorientation distribution during warm 'abc' forging of commercial-purity titanium

    Mironov, S. Y., Salishchev, G. A., Myshlyaev, M. M. & Pippan, R., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 418, p. 257-267

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Experimentelle Analyse inhomogener Verformungsvorgänge in einer PM-Aluminiumknetlegierung

    Schöngrundner, R., 2006

    Research output: Thesis › Diploma Thesis

  12. Published

    Fabrication of a W-25%Cu nanocomposite by high pressure torison

    Sabirov, I., Schöberl, T. & Pippan, R., 2006, In: Materials Science Forum . 503-504, p. 561-566

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Fracture behaviour and fracture properties of tungsten on the micrometer scale

    Motz, C. & Pippan, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Fraktographische Untersuchung zum Problem der Kantenrissbildung beim Strangguss

    Jandl, K. W., 2006

    Research output: Thesis › Diploma Thesis

  15. Published

    GISAXS experiments on Al-coated Si-Wafers with expected “hillocks”

    Görgl, R. & Dehm, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Grain refinement in gamma-TiAl-based alloys by solid state phase transformations

    Clemens, H., Bartels, A., Bystrzanowski, S., Chladil, H., Leitner, H., Dehm, G., Gerling, R. & Schimansky, F.-P., 2006, In: Intermetallics. 14, p. 1380-1385

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    High pressure torsion of rail steels

    Wetscher, F., Tian, B., Stock, R. & Pippan, R., 2006, In: Materials Science Forum . 503-504, p. 455-460

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    HPT-Deformation of copper an nickel single crystals

    Hafok, M., Vorhauer, A., Keckes, J. & Pippan, R., 2006, In: Materials Science Forum . 503-504, p. 621-626

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Influence of Gas Atmosphere on the Plasticity of Metal Thin Films

    Wübben, T., Dehm, G. & Arzt, E., 2006, Influence of Gas Atmosphere on the Plasticity of Metal Thin Films. Materials Research Society : MRS

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Influence of Grain Size on Orientation Change during Plastic Deformation

    Scheriau, S. & Dehm, G., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Influence of Interlayer Thickness on Mechanical Properties of a Cr/CrN Dual Layer Coating System: Structure-Property Relations

    Daniel, R., Herrmann, M., Richter, F., Keckes, J. & Mitterer, C., 2006, 10th International Conference on Plasma Surface Engineering. p. 185-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    In-Situ compression tests on micron-sized copper pillars

    Kiener, D., Motz, C. & Dehm, G., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    In-situ Röntgendiffraktion zur Charakterisierung von mechanischen Spannungen in dünnen Schichten

    Eiper, E., 2006

    Research output: Thesis › Doctoral Thesis

  24. Published

    In-situ TEM straining experiments of Al films on polyimide using a novel FIB design for specimen preparation

    Dehm, G., Legros, M. & Heiland, B., 2006, In: Journal of materials science / Materials in medicine. 41, p. 4484-4489

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    In-Situ TEM Study of Plastic Stress Relaxation Mechanisms and Interface Effects in Metallic Films

    Legros, M., Dehm, G. & Balk, T. J., 2006, In-Situ TEM Study of Plastic Stress Relaxation Mechanisms and Interface Effects in Metallic Films. Materials Research Society : MRS

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    In-situ TEM tensile testing of thin Au films: A transition in deformation mechanism

    Oh, S. H., Kiener, D., Legros, M., Gruber, P., Arzt, E. & Dehm, G., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    In situ X-ray Diffraction as a tool to probe mechanical phenomena down to the nano-scale

    Keckes, J., Eiper, E., Martinschitz, K. J., Boesecke, P., Gindl, W. & Dehm, G., 2006, In: Advanced engineering materials. p. 1084-1088

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Interlayer thickness influence in the tribological response of dual-layer coatings

    Fontalvo, G., Keckes, J., Daniel, R. & Mitterer, C., 2006, 33rd International Conference on Metallurgical Coatings and Thin Films. p. 178-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Intrinsic stresses and stress relaxation in thin-ag mulitlayer coatings

    Köstenbauer, H., Fontalvo, G., Mitterer, C. & Keckes, J., 2006, Thin Flim 2006. p. 200-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Investigations on the microstructure of severely deformed Cu-Cr-composites

    Jessner, P., 2006, 71 p.

    Research output: Thesis › Diploma Thesis

  31. Published

    Korngrößeneinfluss auf die Orientierungsänderung bei der plastischen Verformung

    Scheriau, S. G., 2006

    Research output: Thesis › Diploma Thesis

  32. Published

    Lokale Eigenschaften und Schädigungsverhalten von beschichteten Oberflächen. Bericht 1

    Endler, S. & Dehm, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Lokale Eigenschaften und Schädigungsverhalten von beschichteten Oberflächen. Bericht 2

    Endler, S. & Dehm, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Lokale Eigenschaften und Schädigungsverhalten von beschichteten Oberflächen. Bericht 3

    Endler, S. & Dehm, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Lokale Eigenschaften und Schädigungsverhalten von beschichteten Oberflächen. Bericht 4

    Dehm, G. & Endler, S., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Lokale Verformungsanalysen von hochfesten PM-Werkzeugstählen

    Gruber, P. J., 2006

    Research output: Thesis › Diploma Thesis

  37. Published

    Magnetic properties and microstructure of a FeCo ferritic steel after severe plastic deformation

    Vorhauer, A., Rumpf, K., Granitzer, P., Kleber, S., Krenn, H. & Pippan, R., 2006, In: Materials Science Forum . 503-504, p. 299-304

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Materials analysis of space retrieved materials from the hubble space telescope

    Moser, M., Semprimoschnig, C., van Eesbeek, M. R. J. & Pippan, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Mechanical properties of pyrolysed wood: a nanoindentation study

    Zickler, G., Schöberl, T. & Paris, O., 2006, In: Philosophical magazine. 86, p. 1373-1386

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Mechanical Size-effects in Miniaturized and Bulk Materials

    Dehm, G., Motz, C., Scheu, C., Clemens, H., Mayrhofer, P. H. & Mitterer, C., 2006, In: Advanced engineering materials. 8, p. 1033-1045

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Micron beam bending and compression tests - micromechanical properties of copper

    Motz, C., Kiener, D., Schöberl, T. & Dehm, G., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Microstructural evolution of the deformed volume beneath microindents in tungsten and copper

    Kiener, D., Pippan, R., Motz, C. & Kreuzer, E., 2006, In: Acta materialia. 54, p. 2801-2811

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Microstructural investigation of the deformation zone below nanoindents in copper, silver and nickel

    Rester, M., Kiener, D., Kreuzer, H., Dehm, G. & Motz, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Microstructure and mechanical behavior of Pt-modified NiAl diffusion coatings

    Riethmüller, J., Dehm, G., Affeldt, E. E. & Arzt, E., 2006, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 97, p. 689-698

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Microstructure and Mechanical Properties of a C/C-Copper Joint Developed for Plasma Facing Components

    Eidenberger, E., Scheu, C., Hawranek, G., Pippan, R., Schedler, B., Leitner, H. & Clemens, H., 2006, In: Advanced engineering materials. 8, p. 1092-1096

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Mikrostruktur einer C/C-Cu Verbindung für Erste Wand Komponenten des Iter

    Eidenberger, E., Scheu, C., Hawranek, G., Pippan, R., Schedler, B., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 525-530

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Mikrostrukturentwicklung bei zyklischer Hochverformung

    Rehrl, C. R., 2006

    Research output: Thesis › Diploma Thesis

  48. Published

    Modification of wetting of copper (Cu) on carbon (C) by plasma treatment and molybdenum (Mo)interlayers

    Eisenmenger-Sittner, C., Schrank, C., Neubauer, E., Eiper, E. & Keckes, J., 2006, In: Applied surface science. 252, p. 5343-5346

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Multicrystal Large Strain Computations - Comparison with Strain Field Measurements

    Cailletaud, G., Musienko, A., Schmidegg, K., Kolednik, O. & Pippan, R., 2006, Proceedings of the 12th International Symposium on Plasticity and its Applications. p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Nanoindentation: deviations from the Nix-Gao model

    Rester, M., Motz, C., Schöberl, T., Kreuzer, H. & Pippan, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Nanoindentation in teeth: influence of experimental conditions on local mechanical properties

    Guidoni, G. M., Denkmayr, J., Schöberl, T. & Jäger, I., 2006, In: Philosophical magazine. 86, p. 5705-5714

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...31 32 33 34 35 36 37 38 ...40 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112