Chair of General and Analytical Chemistry (120)

Organisational unit: Chair

Research output

  1. 2018
  2. Published

    Comparison of the high-temperature chloride-induced corrosion between duplex steel and Ni based alloy in presence of H2S

    Schmid, A., Mori, G. K., Hönig, S., Weil, M., Strobl, S. & Haubner, R., 5 May 2018, In: Corrosion science. 139, 15 July 2018, p. 76 - 82 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  3. Published

    Agilent Webinar: Has ICP-MS Helped to Improve the Quality of Data Obtained from Geological Samples?

    Meisel, T. C., 19 Apr 2018

    Research output: Non-textual formWeb publication/siteResearch

  4. Published

    NaCl and CaCl2-induced high temperature corrosion of automotive exhaust components

    Vidic, K. & Mori, G. K., 15 Apr 2018, p. 1-15. 15 p.

    Research output: Contribution to conferencePaperpeer-review

  5. Published

    Behaviour of S31400 and S32205 steels in HCl- and H2S-containing gas atmospheres under a low oxygen partial pressure between 480 – 680 °C

    Schmid, A., Mori, G. K., Haubner, R., Weil, M. & Hönig, S., 27 Feb 2018, In: Materials and Corrosion. DOI: 10.1002/maco.201709992, p. 1328 - 1337

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    Ungewöhnliche Rissbildung an einem Autoklaven bei Versuchen zum thermischen Cracken von anthropogenen Ressourcen

    Schmid, A., Mori, G. K., Strobl, S. & Haubner, R., 18 Jan 2018, In: Practical metallography = Praktische Metallographie. Vol. 55, 4, p. 244-253

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Corrosion behaviour of Fe and Ni based alloys in the reactor atmosphere of a thermal cracking process

    Schmid, A., Mori, G., Hönig, S. & Haubner, R., 1 Jan 2018, European Corrosion Congress, EUROCORR 2018. p. 44-58 15 p. (European Corrosion Congress, EUROCORR 2018).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  8. Published
  9. Published
  10. Published
  11. Published

    Developing High Strength-High Toughness Low Carbon Steel Using Combined V-Ti-Micro-Alloying and Different Thermo-Mechanical Treatments

    Hamed Mahmoud Eid Gouda, A., Eissa, M., Kandil, A., Ali, O. & Mattar, T., 2018, Key engineering materials. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch