Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

501 - 600 out of 1,066Page size: 100

Research output

  1. 2015
  2. Published

    In-situ Observation of Austenite Grain Growth in Plain Carbon Steels by Means of High-Temperature Laser Scanning Confocal Microscopy

    Fuchs, N., Krajewski, P. & Bernhard, C., May 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 05, p. 214-220 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Clogging - Intensiv beforscht, viel diskutiert, erfolgreich gelöst?

    Michelic, S., 13 Apr 2015.

    Research output: Contribution to conference › Presentation › Research

  4. Published

    A novel Approach for the Simulation of Surface Crack Formation in Continuous Casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., Mar 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 3, p. 109-116 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Experimental und Numerical Investigations on Hot Tearing during Continuous Casting

    Arth, G., Ilie, S., Pierer, R. & Bernhard, C., Mar 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 3, p. 103-108 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Methods to determine reaction kinetics of heterogeneous gas-solid chemical reactions

    Scheiber, S., 28 Jan 2015

    Research output: Other contribution › Transfer

  7. Published

    Gas purging benefits in the BOF: A focus on material efficiency and CO2 emission reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 1 Jan 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Vol. 2. p. 2031-2040 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Impact of different heat capacity functions on thermodynamic and kinetic modeling of the basic oxygen furnace

    Bundschuh, P., Schenk, J., Schütt, S., Panhofer, H. & Sormann, A., 1 Jan 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Association for Iron and Steel Technology, AISTECH, Vol. 2. p. 2090-2098 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    A geological excursion to the mining areas of South Africa

    Mogessie, A., Hauzenberger, C., Raic, S., Melcher, F., Prochaska, W., Mali, H., Binder, H., Dietmayer-Kräutler, M., Friedam, F. C., Haas, M., Hampl, F., Hanke, G. E., Hasenburger, W., Kaltenböck, H., Onuk, P., Pamsl, A., Pongratz, K., Schifko, T., Schilli, S. & Schwabl, S. & 20 others, Tauchner, C., Wallner, D., Hentschke, J., Gauert, C., Schantl, P., Belohlavek, L., Ciriello, A., Daghighi, D., Fercher, B., Goetschl, K., Graber, H., Mandl, M., Preissegger, V., Raab, G., Rauschenbusch, F., Sattler, T. M., Schorn, S., Simic, K., Wedenig, M. & Wiesmair, S., 2015, In: Mitteilungen der Österreichischen Mineralogischen Gesellschaft. 161.2015, p. 175-219 45 p.

    Research output: Contribution to journal › Article › Transfer

  10. Published

    Characterization of TiN, TiC and Ti(C,N) in titanium-alloyed ferritic chromium steels focusing on the significance of different particle morphologies

    Michelic, S., Loder, D., Reip, T., Ardehali Barani, A. & Bernhard, C., 2015, In: Materials characterization. 100, p. 61-67

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Die Charakterisierung hoch Al2O3- und MgO- haltiger Pfannenschlacken und deren Einfluss auf das Auflösungsverhalten nichtmetallischer Einschlüsse

    Goriupp, J., 2015

    Research output: Thesis › Doctoral Thesis

  12. Published

    Effect of alkaline elements on the reactivity, strength and structural properties of blast furnace cokes

    Bhattacharyya, A., Schenk, J., Rantitsch, G., Thaler, C. & Stocker, H., 2015, In: Metalurgija : casopis Izdaje Tehnoloski Fakultet Sveucilista u Zagrebu, Odjeli u Sisku, Institut za Metalurgiju i Zeljezara Sisak = Metallurgy. 54, 3, p. 503-506

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 2015, In: RHI bulletin : the journal of refractory innovations. 1, p. 37-42 6 p.

    Research output: Contribution to journal › Article › Research

  14. Published

    In Situ Beobachtung der Azikularferritbildung an nichtmetallischen Einschlüssen am HT-LSCM

    Mayerhofer, A., Loder, D. & Michelic, S., 2015.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Investigating the effective factors on chromium-molybdenum steel shell liner fracture in SAG mill of Sarcheshmeh copper complex

    Javaheri, V., Rastegari, H. & Naseri Seftejani, M., 2015.

    Research output: Contribution to conference › Paper › peer-review

  16. Published

    Investigation of wear mechanism in quenched and tempered medium carbon-high chromium martensitic steel using dry sand/rubber wheel

    Sehri, S. M., Ghayour, H., Amini, K., Naseri Seftejani, M., Rastegari, H. & Javaheri, V., 2015, In: Iron and Steel Society of Iran (ISSI). 12, 2, p. 17-23

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Kinetic characteristics of calcium oxide dissolution in steelmaking slags – in: Proceedings of the 26th International Symposium on Transport Phenomena.

    Cheremisina, E., 2015.

    Research output: Contribution to conference › Paper

  18. Published

    Metallurgische Schlackenführung ausgewählter Stahlsorten bei voestalpine Stahl GmbH

    Baumgartner, K., 2015

    Research output: Thesis › Master's Thesis

  19. Published

    Optimization of processing parameters on an ESP line

    Dierer, F., 2015

    Research output: Thesis › Master's Thesis

  20. Published

    Specific use of non-metallic inclusions for the formation of acicular ferrite structures: thermodynamic modeling and laboratory experiments

    Loder, D. & Michelic, S., 2015, Proceedings of 9th International Conference on Clean Steel.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Standardized Iron Ore Characterization Methodology for Metallurgy

    Kolb, F., Mali, H., Pichler, A. & Schenk, J., 2015, In: Practical metallography = Praktische Metallographie. 52, p. 5-20

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Technologievergleich von Elektrostahlerzeugungsverfahren

    Aichinger, M., 2015

    Research output: Thesis › Master's Thesis

  23. Published

    Thermochemical modelling of the alkali balance in modern blast furnaces

    Pichler, A., Schenk, J., Hauzenberger, F., Thaler, C. & Stocker, H., 2015, ASIA Steel International Conference 2015 - Proceedings. 7A-7: Iron and Steel Institute of Japan

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Untersuchung von Erstarrungsphänomenen im Blockguss

    Penz, F., 2015

    Research output: Thesis › Master's Thesis

  25. 2014
  26. Published

    The Effect of Nb and Ti on Structure and Mechanical Properties of 12Ni-25Cr-0.4C Austenitic Heat-Resistant Steel after Aging at 900 °C for 1000 h

    Javaheri, V., Shahri, F., Mohammadnezhad, M., Tamizifar, M. & Naseri Seftejani, M., Oct 2014, In: Journal of Materials Engineering and Performance. 23, 10, p. 3558-3566 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    EVALUATION OF THE REDUCTION BEHAVIOR OF HEMATITIC IRON ORE UNDER BLAST FURNACE NEAR CONDITIONS

    Baumgartner, K. & Hanel, M., 21 May 2014, p. 135-138. 4 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Bewertung der Reduzierbarkeit von hämatitischem Eisenerz unter hochofenähnlichen Bedingungen

    Baumgartner, K., Scheiber, S., Zarl, M. A. & Hanel, M., 12 May 2014.

    Research output: Contribution to conference › Poster › Research

  29. Published

    PROCESSO E DISPOSITIVO PARA PRODUÇÃO DE MATERIAL FUNDIDO

    Franz, H. (Inventor), Johannes, S. (Inventor), Martin, S. (Inventor), Bogdan, V. (Inventor), Kurt, W. (Inventor), Johann, W. (Inventor), Robert, M. (Inventor) & Norbert, R. (Inventor), 29 Apr 2014, IPC No. C21B 13/ 00 A I, Patent No. BRPI0719882, Priority date 1 Oct 2007, Priority No. WO2007EP08515

    Research output: Patent

  30. Published

    PROCESSO E DISPOSITIVO PARA PRODUÇÃO DE MATERIAL FUNDIDO

    Franz, H. (Inventor), Robert, M. (Inventor), Norbert, R. (Inventor), Johannes, S. (Inventor), Martin, S. (Inventor), Bogdan, V. (Inventor), Kurt, W. (Inventor) & Johann, W. (Inventor), 15 Apr 2014, IPC No. C21B 13/ 14 A I, Patent No. BRPI0719172, Priority date 1 Oct 2007, Priority No. WO2007EP08514

    Research output: Patent

  31. Published

    Editorial

    Kepplinger, W. & Schenk, J., 1 Apr 2014, In: Steel research international. 85, 4, 1 p.

    Research output: Contribution to journal › Editorial › peer-review

  32. Published

    Effect of nucleation undercooling on the kinetics and mechanism of the peritectic phase transition in steel

    Griesser, S., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In: Acta Materialia. 81, p. 111-120 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    A novel approach for the simulation of surface crack formation in continuous casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. x-y

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    A novel approach for the simulation of surface crack formation in continuous casting

    Krajewski, P., Krobath, R., Bernhard, C., Miettinen, J., Louhenkilpi, S., Ilie, S. & Schaden, T., 2014, Proceedings of the 8th European Continuous Casting Conference. p. x-y

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Assessing the quality of metallurgical coke by Raman Spectroscopy

    Rantitsch, G., Bhattacharyya, A., Schenk, J. & Lünsdorf, K., 2014, In: International journal of coal geology. 130, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Atom probe investigations in low carbon steel on Arvedi endless strip production line

    Mendez Martin, F. & Bragin, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Ätzmethoden für die computergestützte Analyse von Azikularferrit im Gefüge

    Otto, C., Loder, D., Michelic, S. & Bernhard, C., 2014.

    Research output: Contribution to conference › Poster › Research

  38. Published

    Austenite Grain Growth and the Surface Quality of Continuously Cast Steel

    Dippenaar, R., Bernhard, C., Schider, S. & Wieser, G., 2014, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 45B, p. 409-418

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Behaviour of chars from non-coking coals under different conditions of smelting reduction processes

    Bhattacharyya, A., Schenk, J., Rantitsch, G. & Heckmann, H., 2014, Proceedings of 4th VDEh-CSM Conference on Metallurgical Fundamentals. p. 58-65

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Bewertung der Reduzierbarkeit und Zerfallsstabilität von Sinter und Stückerz (als Rostbelag verwendet)

    Hanel, M., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Changing of scrap handling to increase the net value of Villares Metals

    Krapscha, C., 2014, 152 p.

    Research output: Thesis › Diploma Thesis

  42. Published

    Characterization and assessment of lump COREX® chars under various process conditions

    Bhattacharyya, A., Schenk, J., Rantitsch, G. & Heckmann, H., 2014, ESTAD and JSI 2014 - Abstract Booklet. p. 324-325

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Characterization of acicular ferrite microstructures using etching methods, optical microscopy and HT-LSCM

    Loder, D., Michelic, S. & Bernhard, C., 2014, Sonderbände der praktischen Metallographie - Fortschritte in der Metallographie. p. 125-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Characterization of Ferrous Burden Material for Use in Ironmaking Technologies

    Hanel, M., 2014

    Research output: Thesis › Doctoral Thesis

  45. Published

    Continuous Casting of Hypo-peritectic Steels: Mould Thermal Monitoring and DSC-analysis

    Presoly, P., Xia, G., Reisinger, P. & Bernhard, C., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 430-437

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Diffusional constrained crystal nucleation during peritectic phase transitions

    Griesser, S., Reid, M., Bernhard, C. & Dippenaar, R., 2014, In: Acta materialia. 67, p. 335-341

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Dissolution behavior of CaO in BOF-process and its effect on the kinetics of metallurgical reactions

    Bundschuh, P., Schenk, J., Hiebler, M., Panhofer, H., Sormann, A. & Klösch, G., 2014, Seminar on Metallurgical Fundamentals. p. 106-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Effectiveness of improvised gas absorption techniques for emergency responders at releases of toxic gases

    Kern, H., Taferner, M. & Raupenstrauch, H., 2014, In: Process Safety Progress.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Effect of alkaline elements on the reactivity, strength and structural properties of blast furnace cokes

    Bhattacharyya, A., Schenk, J., Rantitsch, G., Thaler, S. & Stocker, H., 2014, Proceedings of SHMD 2014. p. 412-412

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Einfluss der Abkühlbedingungen auf die Bildung von Oberflächenrissen beim Stranggießen eines Nb - mikrolegierten Stahls

    Krobath, R., 2014

    Research output: Thesis › Master's Thesis

  51. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., Bernhard, C., Samek, L. & Samoilov, A., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 291-293

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Entwicklung von Stahl-Keramik-Verbunden mit verminderter Dichte

    Arth, G., Bernhard, C., Samek, L. & Samoilov, A., 2014, Forum für Metallurgie und Werkstofftechnik 2014 mit Zukunftskonferenz. p. xx-xx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Experimental study on the formation of non-metallic inclusions acting as nuclei for acicular ferrite in HSLA steels through specific deoxidation practice and defined cooling conditions

    Michelic, S., Loder, D., Arth, G. & Bernhard, C., 2014, Materials Science Forum: Proceedings THERMEC 2013. Vol. 783-786. p. 1079-1084

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Experimental und numerical investigations on hot tearing during continuous casting of steel

    Arth, G., Bernhard, C., Ilie, S., Schaden, T. & Pierer, R., 2014, Conference Proceedings of the 8th ECCC. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Experimentelle Simulation der Oberflächenrissbildung

    Krajewski, P. & Krobath, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  57. Published

    Experimentelle Simulation der Oberflächenrissbildung beim Stranggießprozess mit Hilfe des IMC-B Versuchs

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 304-305

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Identification of peritectic steel grades by thermal mould monitoring and DSC measurements

    Presoly, P., Bernhard, C. & Xia, G., 2014, Proceedings of the 8th European Continuous Casting Conference. p. x-y

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Image analysis for evaluation of iron ore carriers

    Kain-Bückner, B., Mali, H., Schenk, J., Hanel, M., Thaler, C., Stocker, H. & Hauzenberger, F., 2014, Sonderbände der Praktischen Metallographie 46. p. 215-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    IMC-B - a new experimental method to predict the crack susceptiblity under continuous casting conditions

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2014, 1st ESTAD &31st JSI. p. 184-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Influence of alkalis on mechanical properties of lumpy iron carriers during reduction

    Pichler, A., Schenk, J., Hanel, M., Mali, H., Thaler, C., Hauzenberger, F. & Stocker, H., 2014, Conference Proceedings to the 23rd International Conference on Metallurgy and Materials. p. 40-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Influence of CaO dissolution on the kinetics of metallurgical reactions in BOF-process

    Bundschuh, P., Schenk, J., Hiebler, M., Panhofer, H. & Sormann, A., 2014, Influence of CaO dissolution on the kinetics of metallurgical reactions in BOF-process. p. 89-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Influence of thin slab thickness on final strip property in Arvedi ESP plant

    Linzer, B., Watzinger, J., Bragin, S., Bernhard, C. & Bianchi, A., 2014, 8th European Continuous Casting Conference. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    In situ observation of acicular ferrite formation using HT-LSCM: possibilities, challenges and influencing factors

    Loder, D., Michelic, S., Mayerhofer, A., Bernhard, C. & Dippenaar, R., 2014, Proceedings of MS&T14 . p. 469-476

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    In-situ observation of the dissolution of SiO2 particles in CaO-Al2O3-SiO2 slags and mathematical analysis of its dissolution pattern

    Feichtinger, S., Michelic, S., Kang, Y.-B. & Bernhard, C., 2014, In: Journal of the American Chemical Society. 97, p. 316-325

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Kornfeinung hochlegierter Stähle durch heterogene Keimbildung

    Koloszar, R., 2014

    Research output: Thesis › Master's Thesis

  67. Published

    Preparation, reduction and melting of manganese containing iron ore pellets

    Hanel, M., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Process behaviour of fine iron ores during reduction in a fluidized bed reactor and characterization of the morphological evolution

    Pichler, A., 2014,

    Proceedings of the 1st ESTAD & 31 JSI Conference

    .     p. 100-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Reducibility of a Hematitic Lump Ore at different near Blast Furnace Conditions

    Hanel, M., Schenk, J., Mali, H., Hauzenberger, F., Thaler, C. & Stocker, H., 2014, 1st ESTAD & 31st JSI . p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Solidification Modeling on Bloom Casters - Different Methods of Result Verification and Their Application

    Michelic, S., Pierer, R. & Riedler, M., 2014.

    Research output: Contribution to conference › Presentation › Research

  71. Published

    Thermochemical Calculation of the Quaternary CaO–SiO2–Al2O3–MgO System at 1600°C for Predicting the MgO-Saturation and MgO–MgO · Al2O3 Equilibrium of Secondary Metallurgical Slag

    Goriupp, J., Schenk, J., Klösch, G. & Hiebler, M., 2014, In: Steel research international. 85, p. 564-569

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 1: The Description of the BOF Model

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In: Steel research international. 85, p. 537-543

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 2: The Model Validation

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In: Steel research international. 85, p. 544-563

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    The Use of HT-LSCM for the In Situ Observation of Acicular Ferrite

    Loder, D., Michelic, S. & Bernhard, C., 2014.

    Research output: Contribution to conference › Poster › Research

  75. Published

    Untersuchung der Nutzbarkeit von OES-PDA Daten zur Bewertung des Einflusses verschiedener sekundärmetallurgischer Parameter auf die Stahlreinheit

    Dorrer, P., 2014

    Research output: Thesis › Master's Thesis

  76. Published

    Untersuchung der Wirkung von Legierungselementen auf die peritektische Phasenumwandlung in Stählen

    Presoly, P., 2014

    Research output: Thesis › Doctoral Thesis

  77. Published

    Vergleichsstudie martensitischer korrosionsbeständiger Stähle

    Gröblinger, H. H., 2014, 108 p.

    Research output: Thesis › Master's Thesis

  78. Published

    Werkstoff- und Planheitsuntersuchungen von wärmebehandelten Stahlbändern

    Glaser, G. M., 2014, 128 p.

    Research output: Thesis › Master's Thesis

  79. 2013
  80. Published

    Application of Thermodynamic and Kinetic Model for Converter Steelmaking to Optimize Manganese Yield in Crude Steel

    Lytvynyuk, Y., Schenk, J., Hiebler, M., Mizelli, H. & Sormann, A., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 457-458

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    ARVEDI ESP PROCESS – AN ULTIMATE TECHNOLOGY CONNECTING CASTING AND ROLLING IN ENDLESS MODE

    Bragin, S., Rimnac, A., Linzer, B., Bianchi, A., Mantova, A., Rizzi, A. & Bernhard, C., 2013, Rolling 2013. p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Aufheizverhalten von Hot Briquetted Iron unter Stickstoffatmosphäre

    Bundschuh, P., 2013

    Research output: Thesis › Master's Thesis

  83. Published

    Characterization of burden material for ironmaking by means of reduction tests with morphological characterization

    Hanel, M., Mali, H., Thaler, C., Stocker, H., Hauzenberger, F., Skorianz, M. & Schenk, J., 2013, The ISIJ-VDEh-Jernkontoret Joint Symposium. p. 145-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Characterization of Different Lump Ore Brands According to Industrial Scale Process Conditions by Means of Reducibility Testing and Morphological Investigation

    Hanel, M., Skorianz, M., Schenk, J., Mali, H., Hauzenberger, F., Stocker, H. & Thaler, C., 2013, AISTech 2013 Proceedings. p. 447-456

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Charakterisierung von Rohmaterialien für die Eisenerzherstellung mit Bildverarbeitung

    Hanel, M., Kain-Bückner, B., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 445-446

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Comparison of morphology of sulfides in free cutting non-quenched and tempered steel

    You, D., Yue, F., Huajie, W. U., Cui, H., Tian, E. & Wang, Z., 2013, 宝钢学术年会.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Comprehensive Investigations of new Filler Materials for Welding of High Strength Steels

    Schnitzer, R., Rauch, R., Ernst, W., Wagner, J., Baumgartner, S., Leitner, M., Stoschka, M., Schlagradl, T., Schneider, R. & Bernhard, C., 2013, Proceedings of the 3rd International Conference. p. 323-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Das Auflösungsverhalte von Al2O3 und MgO*Al2O3 Partikeln mit definierter Oberfläche in hoch MgO-hätligen sekundärmetallurgischen Pfannenschlacken

    Goriupp, J. & Schenk, J., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 468-469

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Effectiveness of improvised gas absorption techniques for emergency responders at releases of toxic gases

    Kern, H., Taferner, M. & Raupenstrauch, H., 2013, 2013 AIChE Spring Meeting & 9th Global Congress on Process Safety. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Effectiveness of improvised gas absorption techniques for emergency responders at releases of toxic gases

    Kern, H., Taferner, M. & Raupenstrauch, H., 2013, 28th Center for Chemical Process Safety International Conference 2013, CCPS - Topical Conference at the 2013 AIChE Spring Meeting and 9th Global Congress on Process Safety. p. 1022-1028 7 p. (28th Center for Chemical Process Safety International Conference 2013, CCPS - Topical Conference at the 2013 AIChE Spring Meeting and 9th Global Congress on Process Safety; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Effect of titanium on the solidification and postsolidification microstructure of high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2013, In: Welding in the world. 57, p. 665-674

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Enhancement of Efficiency in Crude Iron Production Using an Increased Amount of Pellet Feed

    Schmidt, L., Köpplmayr, D., Plaul, F. & Schenk, J., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 449-450

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Entwicklung von Stahl-Keramik Verbunden mit verminderter Dichte

    Arth, G., 2013, 1 p.

    Research output: Thesis › Doctoral Thesis

  94. Published

    Etching Methods for the Computerized Analysis of Acicular Ferrite in Steel Microstructures

    Loder, D., Michelic, S. & Bernhard, C., 2013.

    Research output: Contribution to conference › Poster › Research

  95. Published

    Experimentelle Simulation der Rissbildung im Temperaturbereich des zweiten Duktilitätsminimums von Stählen

    Krajewski, P., 2013, 193 p.

    Research output: Thesis › Doctoral Thesis

  96. Published

    Identification of Defect Prone Peritectic Steel Grades by Analyzing High-Temperature Phase Transformations

    Presoly, P., Bernhard, C. & Pierer, R., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 5377-5388

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    IMC-B – Ein neuer Ansatz zur Untersuchung der Oberflächenheissrissbildung im Stranggießprozess

    Krajewski, P., Bernhard, C., Krobath, R., Schaden, T. & Ilie, S., 2013, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    IMC-B – ein neuer Ansatz zur Untersuchung der Oberflächenrissbildung im Stranggießprozess

    Krajewski, P., Bernhard, C., Pierer, R., Schneller, F. & Schaden, T., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 108-115

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Inclusion Removal and Modification in Remelting Processes with Special Regard to Inclusion Dissolution in CaO-Al2O3-CaF2 Slags

    Michelic, S., Schider, S. & Bernhard, C., 2013,

    INTECO Melting, Refining, Casting & Remelting Symposium 2013 - Proceedings

    .     p. 172-184

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Influence of aluminium content on the characterization of microstructure and inclusions in high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. S. & Posch, G., 2013, In: Welding in the world. 57, p. 73-83

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Influence of aluminum content on the characterization of microstructure and inclusions in high-strength steel welds

    Vanovsek, W., Bernhard, C., Fiedler, M. & Posch, G., 2013, In: Welding in the world. 57, p. 73-83

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    In-situ Beobachtung von Phasenumandlungen in Stählen

    Schider, S., Gamsjäger, E., Michelic, S. & Bernhard, C., 2013, Prakt. Met. Sonderband 45. p. 139-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    In-situ study of the dissolution of SiO2 inclusions in secondary steelmaking slags for the production of steel wire

    Feichtinger, S., 2013, 89 p.

    Research output: Thesis › Master's Thesis

Previous 12 3 4 5 6 7 8 9 ...11 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201