Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

751 - 800 out of 1,066Page size: 50

Research output

  1. 2010
  2. Published

    Inbetriebnahme einer Druck-Thermogravimetrischen Apparatur und Überprüfung deren Eignung für die Durchführung von Verzunderungs- und Erzreduktionsversuchen

    Wundersamer, J., 2010, 87 p.

    Research output: Thesis › Master's Thesis

  3. Published

    Influence of Auxiliary Fuel Injection to Tuyeres on Flame Temperature and Flooding Limits in the FINEX® Process: A Theoretical Investigation

    Schenk, J., Ahn, S.-G. & Thaler, C., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 518-522

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Influence of bottom purging on the metallurgical results and the BOF process

    Kollmann, T., 2010, 149 p.

    Research output: Thesis › Master's Thesis

  5. Published

    Investigation of the Expected Advantages with Respect to the Electroslag Current Conductive Mold Technology

    Kubin, M., 2010

    Research output: Thesis › Master's Thesis

  6. Published

    Kinetics and Control of Scaling for Reduced Surface Decarburization of Spring Steels

    Anghelina, D., Kienreich, R., Zamberger, S., Zamberger, J., Kozeschnik, E. & Schneider, R., 2010, In: Metalurgia international. XV, p. 5-8

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Kokillenmetallurgie des konventionellen Brammenstranggießens von Stahl

    Xia, G., 2010

    Research output: Thesis › Habilitation thesis › peer-review

  8. Published

    Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen

    Michelic, S., Hartl, M., Wieser, G. & Bernhard, C., 2010, Kombinierter Einsatz analytischer und statistischer Methoden zur quantitativen und qualitativen Bestimmung des Reinheitsgrads von Stählen. Werkstoff-Informationsges., p. 359-364

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Korrelation zwischen Ultra High Cycle Fatigue Ergebnissen und Reinheitsgraduntersuchungen mittels automatisiertem REM/EDX-Verfahren zur Bewertung schmelzmetallurgischer Verfahrensvarianten bei der Edelstahlerzeugung

    Illmaier, C., 2010

    Research output: Thesis › Master's Thesis

  10. Published

    Linking of Computer Assisted Thermodynamics with Automated SEM/EDS Measurements for the Characterization of Non-Metallic Inclusions in Steel

    Wiener, J., Wieser, G. & Schenk, J., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Metallurgische Einflüsse auf die Umformbarkeit von Stählen

    Buchmayr, B. & Bernhard, C., 2010, XXIX. Verformungskundliches Kolloquium. p. 5-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Modelling Solidification Microstructure and Microsegregation in Multicomponent Alloys

    Michelic, S. C., 2010

    Research output: Thesis › Doctoral Thesis

  13. Published

    Optimierung der Gießparameter für niedrig- und hochlegierte Stähle an einer Brammenstranggießanlage

    Fleischl, M., 2010

    Research output: Thesis › Master's Thesis

  14. Published

    Polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys

    Michelic, S., Thuswaldner, J. & Bernhard, C., 2010, In: Acta materialia. 58, p. 2738-2751

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Research and Engineering Work for Enhancement of Competitiveness of FINEX® Technology - Phase 1

    Thaler, C., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Sekundärmetallurgische Aspekte der Herstellung hoch manganhaltiger Stähle

    Wiener, J., 2010, 193 p.

    Research output: Thesis › Doctoral Thesis

  17. Published

    The Nature of Internal Defects in Continuously Cast Steel and their Impact on Final Product Quality

    Pierer, R. & Bernhard, C., 2010, AIST Proceedings 2010. p. 193-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Thermodynamic Description of the System Steel-Slag-Inclusion for Different Metallurgical Processes using FactSage

    Michelic, S., Hartl, M. & Bernhard, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    The Working Group "Continuous Casting: Metallurgy and Materials" (M²CC) at Leoben University

    Bernhard, C., Pierer, R. & Michelic, S., 2010, Proceedings of the AISTech 2010. p. 01-08

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Über die Bildung von Heißrissseigerungen in Stahl: Vergleichende Untersuchungen an Stranggussbrammen und Laborversuchsproben

    Reiter, J., Pierer, R., Ilie, S., Presslinger, H., Fluch, J. & Bernhard, C., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 129-135

    Research output: Contribution to journal › Article › Research › peer-review

  21. 2009
  22. Published

    Process gas purification device for a melt reduction system for extracting pig iron

    Johann, W. (Inventor), Schmidt, M. (Inventor), Sin-Myoung, K. (Inventor), Johannes, L. S. (Inventor), Schmidt, M. (Inventor) & Kang, S.-M. (Inventor), 30 Dec 2009, IPC No. F27B 1/ 18 A I, Patent No. AU2009262387, Priority date 27 May 2009, Priority No. WO2009EP56417

    Research output: Patent

  23. Published

    Method of controlling a transformation process

    Stefan, S. (Inventor), Spuida, B. H. (Inventor), Wieder, K. (Inventor), Johannes, L. S. (Inventor), Mali, H. R. (Inventor), Kurt, W. (Inventor), Winter, F. (Inventor) & Fischer, H. (Inventor), 10 Dec 2009, IPC No. C21B 5/ 00 A I, Patent No. AU2009254074, Priority date 7 May 2009, Priority No. WO2009EP55545

    Research output: Patent

  24. Published

    Process and device for producing pig iron or liquid steel precursors

    Schenk, J. L. (Inventor), Jan-Friedemann, P. (Inventor) & Christian, B. (Inventor), 10 Dec 2009, IPC No. C21B 13/ 00 A I, Patent No. AU2009254062, Priority date 27 Apr 2009, Priority No. WO2009EP55047

    Research output: Patent

  25. Published

    Obituary for Prof. Wilfried Krieger

    Schenk, J., Dec 2009, In: Steel research international. 80, 12, p. 866-866

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Method and device for producing liquid pig iron or liquid steel precursor products

    Georg, A. (Inventor), Wieder, K. (Inventor), Schenk, J. L. (Inventor), Hado, H. (Inventor), Martin, S. (Inventor), Wurm, J. (Inventor), Hado, H. (Inventor), Eder, T. (Inventor), Robert, M. (Inventor) & Johann, W. (Inventor), 24 Sept 2009, IPC No. F27D 17/ 00 A I, Patent No. AU2009226806, Priority date 30 Jan 2009, Priority No. WO2009EP51058

    Research output: Patent

  27. Published

    Method and device for producing molten material

    Hauzenberger, F. (Inventor), Millner, R. (Inventor), Rein, N. (Inventor), Schenk, J. (Inventor), Schmidt, M. (Inventor), Vuletic, B. (Inventor), Wieder, K. (Inventor) & Wurm, J. (Inventor), 9 Sept 2009, IPC No. C21B 13/ 00 A I, Patent No. CN101528948, Priority date 13 Oct 2006, Priority No. DE20061048601

    Research output: Patent

  28. Published

    VERFAHREN UND VORRICHTUNG ZUR HERSTELLUNG VON GESCHMOLZENEM MATERIAL

    Schenk, J. (Inventor), Hauzenberger, F. (Inventor), Millner, R. (Inventor), Rein, N. (Inventor), Schmidt, M. (Inventor), Vuletic, B. (Inventor), Wieder, K. (Inventor) & Wurm, J. (Inventor), 29 Jul 2009, Patent No. 07818595.6

    Research output: Patent

  29. Published

    METHOD AND DEVICE FOR PRODUCING MOLTEN MATERIAL.

    Bogdan, V. (Inventor), Kurt, W. (Inventor), Johann, W. (Inventor), Franz, H. (Inventor), Robert, M. (Inventor), Norbert, R. (Inventor), Martin, S. (Inventor) & Johannes, L. S. (Inventor), 22 Apr 2009, IPC No. C21B 13/ 14 A I, Patent No. MX2009003725, Priority date 1 Oct 2007, Priority No. WO2007EP08514

    Research output: Patent

  30. Published

    METHOD AND DEVICE FOR PRODUCING MOLTEN MATERIAL.

    Bogdan, V. (Inventor), Kurt, W. (Inventor), Johann, W. (Inventor), Franz, H. (Inventor), Robert, M. (Inventor), Norbert, R. (Inventor), Martin, S. (Inventor) & Johannes, L. S. (Inventor), 22 Apr 2009, IPC No. C21B 13/ 00 A I, Patent No. MX2009003732, Priority date 1 Oct 2007, Priority No. WO2007EP08515

    Research output: Patent

  31. Published

    Empirical reduction diagrams for reduction of iron ores with H2 and CO gas mixtures considering non-stoichiometries of oxide phases

    Weiss, B., Sturn, J., Winter, F. & Schenk, J. L., Apr 2009, In: Ironmaking and steelmaking. 36.2009, 3, p. 212-216 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Evaluation of the Limiting Regime in Iron Ore Fines Reduction with H2-Rich Gases in Fluidized Beds: Fe2O3 to Fe3O4

    Sturn, J., Voglsam, S., Weiss, B., Schenk, J. & Winter, F., 25 Feb 2009, In: Chemical Engineering & Technology. 32.2009, 3, p. 392-397 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Fluidized-bed technology for the production of iron products for steelmaking

    Plaul, F. J., Böhm, C. & Schenk, J. L., 1 Feb 2009, In: Journal of the Southern African Institute of Mining and Metallurgy. 109, 2, p. 121-128 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Method and device for producing metals and/or metals initial products

    Schmidt, M. (Inventor), Schenk, J. (Inventor), Hauzenberger, F. (Inventor), Stockinger, J. (Inventor) & Wurm, J. (Inventor), 28 Jan 2009, IPC No. F27D 3/ 00 A I, Patent No. ZA200705780, Priority date 23 Dec 2004, Priority No. AT20040002168

    Research output: Patent

  35. Published

    processo e aparelho para produzir metais e/ou produtos metÁlicos primÁrios

    Franz, H. (Inventor), Johannes, S. (Inventor), Martin, S. (Inventor), Josef, S. (Inventor) & Johann, W. (Inventor), 20 Jan 2009, IPC No. F27D 3/ 00 A I, Patent No. BRPI0519403, Priority date 6 Dec 2005, Priority No. WO2005EP13042

    Research output: Patent

  36. Published

    Application of cyclic steam stimulation by horizontal wells in iranian heavy oil reservoirs

    Razavi, S. D. & Kharrat, R., 2009, In: Scientia Iranica. 16, 2 C, p. 125-139 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    AS2A Software - A new tool for Automatic Solidification Structure Analysis

    Griesser, S., O'Leary, P., Stangl, S. & Pierer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Automatic Determination of Primary Grain Size using Dendrites Orientation in Metallurgical Micrographs

    Griesser, S., O'Leary, P. & Pierer, R., 2009, Quality Control by Artificial Vision. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Bestimmung der Fließeigenschaften von Schüttgütern

    Ellersdorfer, M. & Thaler, C., 2009, Tagungsband zum 5. Minisymposium Verfahrenstechnik an der TU Wien. p. 103-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Bestimmung des Eigenschaftspektrums von beschleunigt erstarrten Proben aus HSLA-Stählen

    Arth, G., 2009

    Research output: Thesis › Master's Thesis

  41. Published

    Characterisation of phase transformation and damage during the solidification of steel

    Presoly, P. & Pierer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Charakterisierung Heißrissbildung

    Pierer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Charakterisierung peritektischer Stähle: Herstellung der Modelllegierungen, Ergebnisse der Dilatometer Versuche, DTA Entwicklungsarbeit & Weiterentwicklung des SSCC-Versuches.

    Presoly, P., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Charakterisierung peritektischer Stähle: Vorstellung des Versuchsprogramms, Modelllegierungen, thermodynamische Berechnungen, theoretische Beschreibung der publizierten Reaktionsmechanismen.

    Presoly, P., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Der Hochofen am Pyhrnbach in Liezen-im 19. Jahrhundert ein Versuchsaggregat für die Geologen

    Presslinger, H., 2009, In: Da schau her. p. 15-18

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Determination of Primary Grain Boundaries in Metallurgical Micrographs via Discontinuities in the Dendrite Orientation

    Griesser, S., O'Leary, P. & Pierer, R., 2009, In: Journal of electronic imaging.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Development of a digital image processing software to evaluate the solidification structure in steel

    Griesser, S., 2009

    Research output: Thesis › Master's Thesis

  48. Published

    Die Stranggießforschung am Lehrstuhl für Metallurgie: Entwicklung, Status und Ausblick

    Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 20-26

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Elektrolytische Extraktion von nichtmetallischen Einschlüssen

    Hartl, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Erstarrung peritektischer Stähle

    Presoly, P., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Experimental Simulation of the Solidification of Steel at Higher Cooling Rate

    Linzer, B., Hohenbichler, G., Bragin, S., Arth, G. & Bernhard, C., 2009, 3rd International Conference on Simulation and Modelling of Metallurgical Processes in Steelmaking (Steelsim 2009). p. Paper -CC17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Experimental Simulation of the Solidification of Steel at Higher Cooling Rates

    Linzer, B., Hohenbichler, G., Bragin, S., Arth, G. & Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 498-503

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...12 13 14 15 16 17 18 19 ...22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201