Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

651 - 700 out of 1,066Page size: 50

Research output

  1. 2012
  2. Published

    Quantifying of a Dynamic Refractory Wear Test Setup for MgO-C Products

    Goriupp, J., Rief, A. & Schenk, J., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 340-344

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Reduction properties of iron, titanium and vanadium containing ore from EVRAS Highveld Steel and Vanadium

    Hanel, M., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Reduktionseigenschaften von Pellets mit unterschiedlichen Mengen an Rücklaufstoffen

    Hanel, M., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    The importance of solidification structure with respect to hot tearing during continuous casting of steels

    Pierer, R., Rauter, W. & Bernhard, C., 2012, TMS 2012. p. 251-258

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    The importance of sulfur in the iron and steel industry

    Goriupp, J. & Schenk, J., 2012, The XII. International Symposium for Desulfurization of Hot Metal and Steel. p. 33-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Thermische Abbildung einer Stranggießanlage für große Rundformate und Verifizierung der Modellergebnisse

    Riedler, M., 2012, 19th International Student's Day of Metallurgy. p. 204-210

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Thermische Abbildung einer Stranggießanlage für große Rundformate und Verifizierung der Modellergebnisse

    Riedler, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Thermische Abbildung einer Stranggießanlage für große Rundformate und Verifizierung der Modellergebnisse

    Riedler, M., 2012

    Research output: Thesis › Master's Thesis

  10. Published

    Thermische Analyse neuer Stähle

    Presoly, P., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Thermodynamic and Kinetic Simulation of the Manganese Ore Addition in the Steelmaking Converter

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Mizelli, H., 2012, Asia Steel 2012. p. 49-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Thermodynamische Berechnung der MgO-Sättigung von Pfannenschlacken

    Goriupp, J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Thermomechanical processing of low-carbon steels on Arvedi endless strip production lines: Modelling and plant results

    Bragin, S., Bernhard, C., Linzer, B., Rimnac, A., Guindani, A. & Venturini, R., 2012, TMP2012 - 4th International Conference on Thermomechanical Processing of Steel. p. Session 9-Paper 1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Untersuchungen zur Verminderung der Eisenverluste bei der Roheisenentschwefelung

    Goriupp, J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Untersuchung von Bindersystemen zur Agglomeration von Feinsteisenerzen und deren Anwendung in Wirbelschichtprozessen

    Köpplmayr, D., 2012

    Research output: Thesis › Master's Thesis

  16. Published

    Vorhersage zur MgO-Sättigung von sekundärmetallurgischen Stahlwerksschlacken

    Goriupp, J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Welding procedure for high strength welds and their microstructural evolution during solidification and cooling: IIW Doc. II-C-436-11

    Vanovsek, W., Schnitzer, R., Schlagradl, T., Schneider, R., Posch, G., Schider, S., Bernhard, C., Leitner, H., Rauch, R., Fiedler, M. & Stoschka, M., 2012

    Research output: Non-textual form › Web publication/site › Research

  18. Published

    Повышение аналитических характеристик полупроводниковых адсорбционных датчиков на основе SnO2 с помощью фотонной симуляции

    Cheremisina, E., 2012, Повышение аналитических характеристик полупроводниковых адсорбционных датчиков на основе SnO2 с помощью фотонной симуляции. 10 ed. Химическая физика экологических процессов, Vol. 31.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  19. 2011
  20. Published

    Verfahren zur Entfernung von CO2 aus Abgasen von Anlagen zur Roheisenherstellung

    Schenk, J. (Inventor) & Millner, R. (Inventor), 15 Apr 2011, Patent No. A.1440/2009

    Research output: Patent

  21. Published

    PROCESS AND DEVICE FOR PRODUCING PIG IRON OR LIQUID STEEL PRECURSORS.

    Johannes, L. S. (Inventor), Jan-Friedemann, P. (Inventor) & Christian, B. (Inventor), 5 Apr 2011, IPC No. C21B 13/ 00 A I, Patent No. MX2010013382, Priority date 27 Apr 2009, Priority No. WO2009EP55047

    Research output: Patent

  22. Published

    Düse zum Eindüsen von sauerstoffhaltigem Gas in ein Roheisenaggregat mit Kantenschutz durch auswechselbares Einsatzstück

    Schenk, J. (Inventor), Aichinger, G. (Inventor), Berner, F. (Inventor), Lechner, S. (Inventor), Lekic-Ninic, M. (Inventor), Plaul, J.-F. (Inventor), Schmidt, M. (Inventor), Söntgen, T. (Inventor), Vuletic, B. (Inventor), Wieder, K. (Inventor) & Wurm, J. (Inventor), 15 Mar 2011, Patent No. A 1862/2008

    Research output: Patent

  23. Published

    Balance model of the Finex process to estimate the overall energy consumption of the process

    Thaler, C., Schenk, J. & Plaul, J. F., 15 Feb 2011, In: Stahl und Eisen. 131, 2, p. 31-37

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    A Study about the Influence of Carbon Content in the Steel on the Casting Behavior

    Xia, G., Bernhard, C., Ilie, S. & Fürst, C., 7 Jan 2011, In: Steel research international. 82.2011, 3, p. 230-236 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Structural and morphological changes during reduction of hematite to magnetite and wustite in hydrogen rich reduction gases under fluidised bed conditions

    Weiss, B., Sturn, J., Voglsam, S., Strobl, S., Mali, H., Winter, F. & Schenk, J., Jan 2011, In: Ironmaking and steelmaking. 38.2011, 1, p. 65-73 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Analyse- und Untersuchungsmethoden zur Charakterisierung der Eigenschaften von Hüttenkoks für moderne Hochöfen

    Pichler, A. & Feichtinger, S., 2011, Proc. of 18th International Student’s Day of Metallurgy. p. von-bis

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Aufheizverhalten von Hot Briquetted Iron (HBI) unter Stickstoff-Atmosphäre

    Skorianz, M., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Automated SEM/EDX Particle Analysis to Determinate Non-Metallic Inclusions in Steel Samples

    Reischl, M., Frank, G., Martinez, C., Aigner, S., Lederhaas, B. & Michelic, S., 2011, In: Practical metallography = Praktische Metallographie. 12, p. 643-659

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Benchmark Analysis BOF Bottom Purging Final Report

    Kollmann, T., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Bilanzmodell des FINEX-Prozesses ermöglicht die Abschätzung des Gesamtenergieverbrauchs

    Thaler, C., Schenk, J. & Plaul, J. F., 2011, In: Stahl und Eisen. 131, p. 31-37

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Charakterisierung der Kühlleistung unterschiedlicher Düsen beim Stranggießen von Stahl

    Kemminger, A., 2011

    Research output: Thesis › Master's Thesis

  32. Published

    Charakterisierung der Mittenseigerung beim Stranggießen von Brammen mittels OES-PDA

    Brombauer, M., 2011

    Research output: Thesis › Master's Thesis

  33. Published

    Charakterisierung peritektischer Stähle: Potential von DSC-Messungen im Bereich der Alpha-Gamma-Umwandlung, sowie im Hochtemperaturbereich, DSC-Messergebnisse der ternären Systeme Fe-C-Si und Fe-C-Al, Auswertung und Vergleich

    Presoly, P., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Charakterisierung peritektischer Stähle: Reassessment eines quasibinären Schnittes im System Fe-1%Si-C, sowie Vorstellung des finalen Versuchsprogrammes (System Fe-C-X-Y).

    Presoly, P., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Charakterisierung peritektischer Stähle: Reassessment eines quasibinären Schnittes im System Fe-C-Al, sowie vertiefende extra Untersuchungen, HTLSCM Gefügebetrachtungen als zweite Methode der Fe-C-Al Legierungen, weiters Versuchsprogramm

    Presoly, P., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Development, implementation and verification of a transient numeric solidification model of a continuous bloom caster at Voestalpine Stahl Donawitz

    Michelic, S., Bernhard, C., Rauter, W., Erker, M., Brandl, W. & Sormann, A., 2011, 7th European Continuous Casting Conference. p. Paper-02

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Development of a dynamic refractory wear testing method for MgO-C products

    Goriupp, J., 2011, In: RHI Marketing & Technology Steel News . p. 8-11

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Einfluss der Prozessparameter während der Nachspülphase auf die Konvertermetallurgie

    Hädicke, P., 2011, 97 p.

    Research output: Thesis › Master's Thesis

  39. Published

    Einfluss der Schlackenchemie auf den Feuerfestverschleiß in sekundärmetallurgischen Pfannen

    Goriupp, J., 2011

    Research output: Thesis › Master's Thesis

  40. Published

    Entwicklung eines Modells zur Bilanzierung der Massen- und Energieströme für den FINEX®-Prozess zur Optimierung des Energieeinsatzes und Minimierung der Treibhausgasemissionen

    Thaler, C. M., 2011, 79 p.

    Research output: Thesis › Master's Thesis

  41. Published

    Entwicklung und Erprobung einer dynamischen Testmethode zur chemischen Verschleißsimulation von MgO-C Produkten.

    Goriupp, J., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Erste Ergebnisse des neuen Hochtemperatur-Konfokalmikroskops am Lehrstuhl für Metallurgie

    Bernhard, C., Schider, S., Sormann, A., Xia, G. & Ilie, S., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 161-167

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Erweiterte Untersuchungen zur Eisenverteilung in Roheisenentschwefelungsschlacken (AlzChem/LfM 2)

    Goriupp, J., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Experimental methods to characterise new steel grades by means of thermal analysis

    Presoly, P., Pierer, R. & Bernhard, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Experimentelle Analyse des Verhaltens oxidischer Einschlüsse im System CaO-Al2O3-MgO

    Loder, D., 2011, Proc. of 18th International Student’s Day of Metallurgy. p. von-bis

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Experimentelle Simulation des Zwei-Walzen-Gießverfahrens

    Arth, G., 2011, International Student's Day of Metallurgy 2011. p. 10-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Extraktion als Werkzeug zur dreidimensionalen Einschlusscharakterisierung

    Lederhaas, B. & Michelic, S., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Grundlegende Untersuchungen zur Eisenverteilung in Roheisenentschwefelungsschlacken (AlzChem/LfM 1)

    Goriupp, J., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Industrial fluidised bed direct reduction kinetics of hematite ore fines in H2 rich gases at elevated pressure

    Weiss, B., Sturn, J., Voglsam, S., Winter, F. & Schenk, J., 2011, In: Chemical engineering science : Génie chimique. 66.2011, 4, p. 703-708 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of alloying additions on the morphology of non-metallic inclusions in high-strength steel welds: II-1776-11;II-C-421-11

    Vanovsek, W., Bernhard, C., Fiedler, M. & Posch, G., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  51. Published

    Interactions of non-metallic inclusions with steel and slag: Thermodynamic modeling, experiments and metallographic analyses

    Michelic, S., Hartl, M. & Bernhard, C., 2011, EPD Congress 2011. p. 723-730

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Investigating the influence of Ti and P on the clogging of ULC steels in the continuous casting process

    Bernhard, C., Xia, G., Karasangabo, A., Egger, M. & Pissenberger, A., 2011, 7th European Continuous Casting Conference. p. Paper -17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...10 11 12 13 14 15 16 17 ...22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201