Chair of Designing Plastics and Composite Materials (250)
Organisational unit: Chair
Research output
- 2021
- Published
CrackDect: Detecting crack densities in images of fiber-reinforced polymers
Drvoderic, M., Rettl, M., Pletz, M. & Schuecker, C., 13 Oct 2021, In: SoftwareX. 16.2021, December, 6 p., 100832.Research output: Contribution to journal › Article › Research › peer-review
- Published
Development of 3D-printed (FFF) devices to fight COVID-19 transmission
Pais, A. I., Castro Pires, V., Ferreira, C., Silva, V., Alves, J. L., Bastos, J. A. & Belinha, J., 19 Oct 2021, CRC Press.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- 2022
- Published
Dynamic Mechanical Response in Epoxy Nanocomposites Incorporating Various Nano-Silica Architectures
Chaudhary, S., Vryonis, O., Vaughan, A. S., Andritsch, T. & Feuchter, M., 2022, ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings. Institute of Electrical and Electronics Engineers, p. 86-89 4 p. (ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Prediction of the failure behaviour in steel cable reinforced rubber components using the Finite Element Method
Frankl, S. M., 2022Research output: Thesis › Doctoral Thesis
- Published
Tactile friction of UV-curable coatings and its relation to surface hardness
Ules, T., Grießer, M., Schlögl, S. & Gruber, D. P., 2022.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Modeling Stiffness Degradation of Fiber-Reinforced Polymers Based on Crack Densities Observed in Off-Axis Plies
Drvoderic, M., Pletz, M. & Schuecker, C., Jan 2022, In: Journal of composites science. 6.2022, 1, 15 p., 6010010.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Assessing Failure in Steel Cable-Reinforced Rubber Belts Using Multi-Scale FEM Modelling
Frankl, S. M., Pletz, M., Wondracek, A. & Schuecker, C., 20 Jan 2022, (E-pub ahead of print) In: Journal of composites science. 6.2022, 2, 13 p., 34.Research output: Contribution to journal › Article › Research › peer-review
- Published
Improved concept for iterative crack propagation using configurational forces for targeted angle correction
Frankl, S. M., Pletz, M. & Schuecker, C., 1 May 2022, In: Engineering Fracture Mechanics. 266.2022, 1 May, 15 p., 108403.Research output: Contribution to journal › Article › Research › peer-review
- Published
Combined Crack Initiation and Crack Growth Model for Multi-Layer Polymer Materials
Pletz, M. & Arbeiter, F. J., 3 May 2022, In: Materials. 15.2022, 9, 13 p., 3273.Research output: Contribution to journal › Article › Research › peer-review
- Published
Matrix–fiber interfacial debonding in soft composite materials: Cyclically behavior modeling and microstructural evolution
Mansouri, M. R., Fuchs, P. F., Baghani, M. & Schuecker, C., 15 May 2022, In: Composites Part B: Engineering. 237.2022, 15 May, 12 p., 109853.Research output: Contribution to journal › Article › Research › peer-review
