Chair of Ceramics (320)

Organisational unit: Chair

1 - 50 out of 534Page size: 50

Research output

  1. 2025
  2. Published

    Application of coupled CFD-DEM modelling in erosion study of cohesive materials: A case study of rotating finger test

    Rahimilarki, M., Burhanuddin, B., Vollmann, S., Jin, S. & Harmuth, H., 23 Jan 2025, In: Results in Engineering. 25.2025, March, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Artificial neural network model for estimating mold flux melting temperature

    Mapelli, C., Mombelli, D., Dall'osto, G., Cho, J., Gruber, N., Marschall, I., Cornille, M., Alloni, M. & Carli, R., 15 Dec 2024, In: ISIJ international. 64.2014, 14, p. 2008-2019 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Erosion Behavior of Coarse-Grained Alumina in Corrosive Melts: Experimental and Computational Studies with CAS and CASM Slags

    Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., 19 Nov 2024.

    Research output: Contribution to conference › Paper › peer-review

  6. Published

    Fracture process zone modelling of a magnesia spinel refractory using phase field fracture model

    Ali, Z., Jin, S. & Gruber, D., 15 Nov 2024, In: Finite elements in analysis and design. 242.2024, December, 12 p., 104279.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Utilization of recovered refractory material as slag additive and experimental determination of liquid slag properties

    Moll, S., Marschall, I., Schlemmer, N., Halwax, A., Kek, F. W., Weiß, C. & Eisbacher-Lubensky, J., 30 Oct 2024.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Design of a new ceramic castable for investment casting of turbine blades

    Smedes, M., Gruber, D. & Zhang, W., 15 Oct 2024.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Creep strain recovery of a refractory castable under loading/unloading conditions

    Gruber, D., Akbari, B. & Harmuth, H., 18 Sept 2024, Proceedings of International Colloquium on Refractories: ICR 2024.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Microstructural changes in high alumina refractory due to hydrogen exposure

    Bohorquez Moreno, C. & Gruber, D., 18 Sept 2024, Proceedings of International Colloquium on Refractories: ICR 2024.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Coupled CFD-DEM Simulation of Flow-Induced Erosion in Cohesive Materials

    Vollmann, S., Rahimilarki, M. & Jin, S., Sept 2024.

    Research output: Contribution to conference › Abstract › peer-review

  12. Published

    Flow-induced erosion modelling of cohesive material with coupled CFD-DEM approach

    Rahimilarki, M., Vollmann, S. & Jin, S., 27 Aug 2024, In: Minerals engineering. 217.024, October, 15 p., 108947.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Finite Element modelling of refractories fracture process zone with gradient enhanced damage models

    Ali, Z. & Gruber, D., 26 Aug 2024.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Experimental, analytical, and numerical quantification of the Marangoni effect in static refractory finger test

    Vollmann, S., Guarco, J. & Burhanuddin, B., 28 Jun 2024, In: Ceramics International : CI. 50.2024, 18, Part B, p. 33953-33967 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Effect of Slag Basicity on Alumina Dissolution and Diffusivity: A High-temperature Confocal Laser Scanning Microscopy Study

    Burhanuddin, B. & Harmuth, H., 15 Jun 2024, In: China's refractories. 33.2024, 2, p. 27-34 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Brittleness reduction of low-carbon Al2O3-C refractories with in-situ formation MgAl2O4/CNTs layer between aggregate and matrix

    Luo, J., Jin, S., Chong, X., Ding, D. & Xiao, G., Apr 2024, In: Journal of the European Ceramic Society. 44.2024, 4, p. 2620-2629 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Determination of the influence of particle spatial distribution and interface heterogeneity on tensile fracture of ordinary refractory ceramics by applying discrete element modelling

    Du, W., Jin, S. & Gruber, D., 21 Mar 2024, In: Computational particle mechanics. 11.2024, 5, p. 1887-1901 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Finite element modelling of refractories fracture process zone with gradient enhanced damage models

    Ali, Z., Jin, S. & Gruber, D., 21 Mar 2024, In: Finite elements in analysis and design. 234.2024, July, 15 p., 104151.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Steel Ladle Slag Zone Lining Optimization Considering Irreversible Material Behavior

    Klopf, M., Hou, A., Jin, S. & Gruber, D., 13 Mar 2024, In: Steel research international. 95.2024, 7, 10 p., 2300557.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Determining the critical Reynolds number for suppressing Marangoni convection of alumina in silicate melt

    Burhanuddin, B., Harmuth, H. & Vollmann, S., 29 Feb 2024, (E-pub ahead of print) In: Ceramics International : CI. 50.2024, 11 Part A, p. 18323-18328 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    A Modified Rotating-Finger Test Aiming to Quantify Refractory Wear Based on Fundamental Equations Governing Refractory Dissolution and Erosion

    Burhanuddin, B. & Harmuth, H., 6 Feb 2024, Advances in Pyrometallurgy: Furnace Containment. Springer, p. 119-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Creep and creep strain recovery of a spinel forming refractory castable - measurement and simulation

    Akbari, B., 2024

    Research output: Thesis › Doctoral Thesis

  23. Published

    Dynamic wetting phenomena of CaO-SiO2-Al2O3-Li2O slag on magnesia

    Ijaz, M. U., 2024

    Research output: Thesis › Master's Thesis

  24. Published

    Effect of liquefaction controlling components in carbon-free mould powder for the continuous casting of ultra-low carbon steels

    Gruber, N., 2024, MOLTEN 2024 Conference Proceedings: 12th International Conference on Molten Slags, Fluxes and Salts. Hayes, P. & Jak, E. (eds.). Carlton Victoria, Australia, Vol. 3/2024. p. 979-996 18 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Ein mineralisches Bindemittel auf Basis Olivin

    Lackner, L., 2024

    Research output: Thesis › Master's Thesis

  26. Published

    Thermomechanische Charakterisierung eines feuerfesten Alumina Carbon Materials

    Bleidt, M., 2024

    Research output: Thesis › Master's Thesis

  27. 2023
  28. Published

    Large mechanical properties enhancement in ceramics through vacancy-mediated unit cell disturbance

    Chen, Z., Huang, Y., Koutná, N., Gao, Z., Sangiovanni, D., Fellner, S., Haberfehlner, G., Jin, S., Mayrhofer, P. H., Kothleitner, G. & Zhang, Z., 16 Dec 2023, In: Nature Communications. 14.2023, 1, 11 p., 8387.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Untersuchung der Performance eines fluorfreien Gießpulvers auf einer Pilotanlage

    Riedler, S., Gruber, N., Marschall, I., Ilie, V.-S. & Klösch, G., 27 Oct 2023, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 11, p. pages 515–520 6 p.

    Research output: Contribution to journal › Article › Research

  30. Published

    Einfluss von Kohlenstoff auf das Aufschmelzverhalten eines Gießpulvers bei hohen Heizraten

    Gruber, N., 25 Oct 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 10, p. 521–526 6 p.

    Research output: Contribution to journal › Article › Research

  31. Published

    Analyzing crack deflection behavior of refractories by digital image correlation

    Fruhstorfer, J., Gruber, D. & Harmuth, H., 12 Sept 2023, In: AIP Conference Proceedings. 2894, 1, 020002.

    Research output: Contribution to journal › Conference article › peer-review

  32. Published

    Liquefaction Controlling Components and Their Effect on Carbon-Free Mold Powders

    Gruber, N., 30 Aug 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, December, p. pages 3092–3100 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Dissolution of Magnesia in Silicate Melts and Diffusivity Determination from CLSM Studies

    Burhanuddin, B. & Harmuth, H., 21 Jul 2023, In: Applied Sciences : open access journal. 13.2023, 14, p. 8458 8 p., 8458.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Morphology characterization for refractory aggregates

    Wu, M. & Jin, S., 14 Jul 2023, (E-pub ahead of print) In: Open ceramics. 15.2023, September, 7 p., 100408.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Calculation of mass transfer for rotating finger test equipment

    Burhanuddin, B., Harmuth, H. & Guarco, J., 4 Jul 2023.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Evaluation of Slag Foaming Behavior Using Renewable Carbon Sources in Electric Arc Furnace-Based Steel Production

    Kieush, L., Schenk, J., Koveria, A., Hrubiak, A., Hopfinger, H. & Zheng, H., 12 Jun 2023, In: Energies. 16.2023, 12, 25 p., 4673.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    Nanoscale toughening of low carbon Al2O3-C refractories by means of SiCnw/Al2O3 composite reinforcement

    Chong, X., Luo, J., Ding, D., Jin, S. & Xiao, G., 9 Jun 2023, (E-pub ahead of print) In: Journal of the American Ceramic Society. 106.2023, 11, p. 6891-6910 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    A methodology for performing and evaluating miniaturized wedge splitting tests accompanied by digital image correlation

    Fruhstorfer, J. & Gruber, D., 30 May 2023, (E-pub ahead of print) In: Engineering Fracture Mechanics. 288.2023, 4 August, 15 p., 109357.

    Research output: Contribution to journal › Article › Research › peer-review

  39. E-pub ahead of print

    Creep strain recovery of an in situ spinel-forming refractory castable under loading/unloading compressive creep conditions

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 17 May 2023, (E-pub ahead of print) In: Ceramics International. 49.2023, 15, p. 25225-25231 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    Determination of cohesion and friction angle of a MgO-C refractory at room and elevated temperatures

    Klopf, M. & Gruber, D., 9 May 2023, (E-pub ahead of print) In: Open ceramics. 14.2023, June, 6 p., 100369.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    Anisotropy of fracture mechanical properties of carbon-containing refractories and its impact on cracking in a steel ladle lining

    Gruber, D., Schachner, S. & Harmuth, H., 2 May 2023, (E-pub ahead of print) In: Open ceramics. 14.2023, June, 5 p., 100363.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Utilization of Renewable Carbon in Electric Arc Furnace-Based Steel Production: Comparative Evaluation of Properties of Conventional and Non-Conventional Carbon-Bearing Sources

    Kieush, L., Schenk, J., Koveria, A., Rantitsch, G., Hrubiak, A. & Hopfinger, H., 6 Apr 2023, In: Metals. 13.2023, 4, 16 p., 722.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Auswirkung der Reduktion des SiC-Gehalts eines Gießpulvers auf dessen Aufschmelzverhalten

    Lintner, K., 2023

    Research output: Thesis › Master's Thesis

  44. Published

    Implementierung einer klinkerärmeren Zementsorte CEM II/B-M 42,5N mit getrennter Mahlung von Kalkstein

    Erlacher, T., 2023

    Research output: Thesis › Master's Thesis

  45. Published

    Optimization of Operation Conditions for Refractory Corrosion Tests in a High Frequency Induction Furnace

    Wagner, M., 2023

    Research output: Thesis › Master's Thesis

  46. Published

    Preparation of Al2O3-SiO2-SiC Castable for KR Stirring Head and Multiphase Flow Numerical Simulation of Desulfurization Process

    Li, Z., 2023

    Research output: Thesis › Master's Thesis

  47. Published

    Simulation and Post-mortem Studies: The Holistic Approach for Optimized and Engineered Lining Concepts

    Gregurek, D., Unterreiter, G., Lind, C. & Spanring, A., 2023, The Minerals, Metals & Materials Series.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  48. Published

    Synthesis of Yttrium Ferrite Near Infrared Reflective Materials

    Li, Y., 2023

    Research output: Thesis › Master's Thesis

  49. Published

    Untersuchung zur Klärung der Struktur von nichtmetallischen Einschlüssen im Stahl

    Theussl, O., 2023

    Research output: Thesis › Master's Thesis

  50. 2022
  51. Published

    Quantification of Magnesia Dissolution in Silicate Melts and Diffusivity Determination Using Rotating Finger Test

    Burhanuddin, B., Harmuth, H. & Vollmann, S., 13 Dec 2022, In: Applied Sciences : open access journal. 12.2022, 24, 13 p., 12791.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Effect of carbon on the melting behavior of a mold powder under high heating rates

    Gruber, N., Dec 2022.

    Research output: Contribution to conference › Presentation › Research

  53. Published

    Method for inverse calculation of erosion parameters in slag-refractory systems

    Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., Dec 2022, In: Materials Today Communications. 33.2022, December, 10 p., 104736.

    Research output: Contribution to journal › Article › Research › peer-review

  54. E-pub ahead of print

    Thermal expansion and Young's modulus evolution of fused silica and crystalline silica-containing materials

    Yin, Y., Jin, S., Zhu, Q., Dai, Y., Li, Y. & Xia, Z., 30 Nov 2022, (E-pub ahead of print) In: International journal of applied ceramic technology. 20.2023, 3, p. 1875-1886 12 p.

    Research output: Contribution to journal › Comment/debate › peer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next
View graph of relations

Contact information

Peter-Tunner-Straße 5, 8700 Leoben
  • Main phone number: +43 3842 402 3201