Chair of Casting Research (330)

Organisational unit: Chair

51 - 100 out of 434Page size: 50

Research output

  1. 2021
  2. Published

    Sand Casting of Metallic Parts and Structures

    LI, J., 1 Sept 2021, Encyclopedia of Materials: Metals and Alloys. Elsevier, p. 37-53 17 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  3. Published

    Modelling melting and grain destruction phenomena during globular equiaxed solidification

    Zhang, H., Wu, M., Schumacher, P., Gomes Rodrigues, C., Ludwig, A. & Kharicha, A., Sept 2021, In: Applied Mathematical Modelling. 97.2021, September, p. 821-838 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Unusual relationship between impact toughness and grain size in a high-manganese steel

    Xie, P., Shen, S., Wu, C., LI, J. & Chen, J., 13 Apr 2021, (E-pub ahead of print) In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 89.2021, 30 October, p. 122-132 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Composition-dependent dynamic precipitation and grain refinement in Al-Si system under high-pressure torsion

    Jin, S., Luo, Z., An, X., Liao, X., LI, J. & Sha, G., 30 Mar 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 68, p. 199-208 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    The nucleation sequence of α-Al on TiB2 particles in Al-Cu alloys

    LI, J., Hage, F. S., Ramasse, Q. M. & Schumacher, P., 15 Jan 2021, In: Acta materialia. 206.2021, March, 9 p., 116652.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Der Korrosion auf der Spur

    Panzirsch, B., Schröttner, H. & Schumacher, P., 2021, In: Metall. p. 22-23

    Research output: Contribution to journal › Article › Research

  8. Published

    Digitalisierung in der Gießereitechnik, Teil 1: Herausforderungen und Chancen

    Bührig-Polaczek, A., Rudack, M., Salentin, F. G., Sandt, M., Hartmann, D., Brait, M., Koppensteiner, E., Schindelbacher, G. & Schumacher, P., 2021, In: Giesserei. 108.2021, 6, p. 47-53 7 p.

    Research output: Contribution to journal › Article › Research

  9. Published

    Einfluss von Tantal auf die Kornfeinung einer Al10SiMg Legierung

    Pammer, M., LI, J. & Schumacher, P., 2021, In: Gießerei-Rundschau. 68.2021, 2, p. 15-20 6 p.

    Research output: Contribution to journal › Article › Research

  10. Published

    Gezielte Beeinflussung der lokalen Eigenschaften von Sphäroguss unter Verwendung von 3D-gedruckten Kernen

    Brait, M., Koppensteiner, E., Schindelbacher, G. & Schumacher, P., 2021, In: Gießerei-Rundschau. 68.2021, 1, p. 12-25 14 p.

    Research output: Contribution to journal › Article › Research

  11. Published

    Montanuniversität Leoben - Lehrstuhl für Gießereikunde

    Schumacher, P., 2021, In: Jahresmagazin Ingenieurwissenschaften im Fokus: akaGuss – Gießereitechnik. 2021, p. 76-84 9 p.

    Research output: Contribution to journal › Article › Research

  12. 2020
  13. Published

    Microstructure evolution and fracture behavior of Mg-9.5Gd-0.9Zn-0.5Zr alloy subjected to different heat treatments

    Xiao, L., Yang, G., Ma, J., Qin, H., LI, J. & Jie, W., Oct 2020, In: Materials characterization. 168, 110516.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Development of an aluminum compound casting process - Experiments and numerical simulations

    Heugenhauser, S., Kaschnitz, E. & Schumacher, P., May 2020, In: Journal of materials processing technology. 279, 116578.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Corrosion behavior of as-cast Mg-5Sn based alloys with In additions in 3.5 wt% NaCl solution.

    Wang, X. J., Chen, Z. N., Ren, J., Kang, H. J., Guo, E. Y., LI, J. & Wang, T. M., Mar 2020, In: Corrosion science. 164.2020, March, p. 108318 11 p., 108318.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Microstructures, mechanical properties and deformation of near-rapidly solidified low-density Fe-20Mn-9Al-1.2C-xCr steels

    Zhang, J., Hu, C., Zhang, Y., LI, J., Song, C. & Zhai, Q., 15 Jan 2020, In: Materials and Design. 186.2020, 15 January, 13 p., 108307.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification

    Liu, Z.-T., Wang, B.-Y., Wang, C., Zha, M., Liu, G.-J., Yang, Z.-Z., Wang, J.-G., LI, J. & Wang, H.-Y., 2020, In: Journal of Materials Science and Technology. 41.2020, 15 March, p. 178-186 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2019
  19. Published

    Mohr-Coulomb failure criterion from unidirectional mechanical testing of sand cores after thermal exposure

    Stauder, B., Berbic, M. & Schumacher, P., Dec 2019, In: Journal of materials processing technology. 274.2019, December, 8 p., 116274.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution during Rolling of Directionally Solidified Ag-Cu Eutectic Alloy

    LI, J., Li, J., Renk, O., Pippan, R. & Ghosh, P., 31 Oct 2019, (E-pub ahead of print) In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, 1, p. 368-379 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Internal Fractures After Blasting Confined Rock and Mortar Cylinders.

    Kukolj, I., Oberdorfer, B. & Ouchterlony, F., 23 Sept 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164, p. 422–430

    Research output: Contribution to journal › Article › Research

  22. Published

    Aspects of grain refinement of copper alloys

    Cziegler, A. & Schumacher, P., 20 Sept 2019.

    Research output: Contribution to conference › Abstract › peer-review

  23. Published

    Precipitation microstructure in Al-Si-Mg-Mn alloy with Zr additions

    Vončina, M., Medved, J., Kores, S., Xie, P., Schumacher, P. & LI, J., Sept 2019, In: Materials characterization. 155.2019, September, 8 p., 109820.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Understanding formation of Mg-depletion zones in Al-Mg alloys under high pressure torsion

    Xue, J., Jin, S., An, X., Liao, X., Li, J. & Sha, G., 1 May 2019, In: Journal of Materials Science and Technology. 35.2019, 5, p. 858-864 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Grain Refinement of Al4CuTi Based Alloy with Zr, Sc, Er, and TiB2

    LI, J., Ahmad, S. & Schumacher, P., 19 Feb 2019, Light Metals 2019. Springer International Publishing, p. 1423-1429 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Microstructure and magnetic property of LaFe11.6Si1.4 magnetocaloric alloys by a novel short time heat treatment

    Yang, L., Zhou, Z., Feng, S., Li, J., Liu, J., Li, J., Hu, Q. & Li, J., 1 Feb 2019, In: Intermetallics. 105.2019, February, p. 1-5 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy

    Xiao, L., Yang, G., Chen, J., Luo, S. F., Li, J. & Jie, W., 28 Jan 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, p. 277-289 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Aspekte extremer Kornfeinung beim Leichtmetallguss

    Schumacher, P., LI, J. & Cziegler, A., 2019, In: Gießerei-Rundschau. 2019, 4, p. 32

    Research output: Contribution to journal › Article › Research

  29. Published

    Charakterisierung und Konditionierung von warmfesten Werkstoffen für den Einsatz in hochaggressiven Medien

    Mair, L., 2019

    Research output: Thesis › Master's Thesis

  30. Published

    Determining Casting Defects in Thixomolding Mg Casting Part by Computed Tomography

    LI, J., Oberdorfer, B. & Schumacher, P., 2019, Shape Casting 2019: 7th International Symposium Celebrating Prof. John Campbell's 80th Birthday. Springer International Publishing, p. 99-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Eutectic modification by ternary compound cluster formation in Al-Si alloys

    Barrirero, J., Pauly, C., Engstler, M., Ghanbaja, J., Ghafoor, N., LI, J., Schumacher, P., Odén, M. & Mücklich, F., 2019, In: Scientific reports. 2019, 9, 5506.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Revealing grain refinement mechanisms in copper alloys

    Cziegler, A., 2019

    Research output: Thesis › Doctoral Thesis

  33. Published

    Solute clustering and precipitation in an Al-Cu-Mg-Ag-Si model alloy

    LI, J., An, Z., Hage, F. S., Wang, H. Y., Xie, P., Jin, S., Ramasse, Q. M. & Sha, G., 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 760.2019, 8 July, p. 366-376 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Untersuchung des Einflusses von Übergangsmetallen auf die mechanischen Eigenschaften von Al-Si-Legierungen für Zylinderkopf-Anwendungen

    Susloparov, A., 2019

    Research output: Thesis › Master's Thesis

  35. Published

    Untersuchungen zur gezielten Beeinflussung der lokalen Eigenschaften von Eisengusswerkstoffen mittels 3D-gedruckter Kerne

    Brait, M., 2019

    Research output: Thesis › Master's Thesis

  36. 2018
  37. Published

    Specific fracture energy and de-agglomeration rate of silicate-bonded foundry sand cores

    Stauder, B., Gruber, D. & Schumacher, P., 11 Oct 2018, In: Production Engineering : research and development. 2018, 12(6), p. 807-816 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Neue Aspekte bei der Herstellung von Leichtmetallguss: Kornfeinung von Al-Cu Legierungen

    Schumacher, P., LI, J., Oberdorfer, B. & Hofer, F., Oct 2018, In: Gießerei-Rundschau. 65, 04/2018, p. 6-11

    Research output: Contribution to journal › Article › Research

  39. Published

    Potenziale und Limitierungen von Si-mischkristallverfestigten GJS-Sorten

    Gassner, G., Koppensteiner, E., Glavanovic, L., Schindelbacher, G. & Schumacher, P., Oct 2018, In: Gießerei-Rundschau. 65, 04/2018, p. 12-21

    Research output: Contribution to journal › Article › Research

  40. Published

    Effect of trace elements on microstructure and material properties of an aluminium alloy

    Pabel, T., Petkov, T., Schröttner, H., Albu, M., Rossmann-Perner, A., Schumacher, P. & LI, J., Sept 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. E-pub ahead of print

    Archaeological Arsenical Bronzes and Equilibrium in the As-Cu System

    Mödlinger, M., Cziegler, A., Macció, D., Schnideritsch, H. & Sabatini, B., 10 Jul 2018, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2018, 49/5, p. 2505-2513 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Solidification behaviour of Al-Si based alloys with controlled additions of Eu and P

    LI, J., Ludwig, T., Oberdorfer, B. & Schumacher, P., 3 Jun 2018, In: International journal of cast metals research. 2018, 31/6, p. 319-331

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Microstructure and Tensile Properties of AZ61 Alloy Sheets Processed by High-Ratio Extrusion with Subsequent Direct Aging Treatment

    Zhang, C.-C., Wang, H.-Y., Zha, M., Wang, C., Li, J.-H., Yang, Z.-Z. & Jiang, Q.-C., 26 May 2018, In: Materials. 11.2018, 6, 11 p., 895.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Effect of Molybdenum and Zirconium on Aluminium Casting Alloys

    Voncina, M., Medved, J., Kores, S., Xie, P., Cziegler, A. & Schumacher, P., Apr 2018, In: Livarski vestnik. 2018, 65/1, p. 36-48

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Ultraschallbehandlung von Aluminiumschmelzen: Untersuchung des Effekts einer künstlichen Aufgasung nach einer US-Behandlung

    Cziegler, A., Pabel, T., Habe, D. & Schumacher, P., 29 Mar 2018, In: Giesserei. 04, p. 74-79

    Research output: Contribution to journal › Article › Research › peer-review

  46. E-pub ahead of print

    Microstructure and mechanical properties of foundry Al-Si-Cu-Hf alloy

    Xing, Y., Jia, Z., LI, J., Ding, L., Huang, H. & Liu, Q., 7 Mar 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 722.2018, 11 April, p. 197-205 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    De-agglomeration rate of silicate bonded sand cores during core removal

    Stauder, B., Harmuth, H. & Schumacher, P., Feb 2018, In: Journal of materials processing technology. 252 (2018), 252, p. 652-658 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Montanuniversität Leoben - Kompetenz durch Kooperation

    Schumacher, P., Feb 2018, In: Gießerei-Rundschau. 2018, 65/2, p. 10-16

    Research output: Contribution to journal › Article › Research

  49. Published

    Vorwort

    Schumacher, P., Feb 2018, In: Gießerei-Rundschau. p. 1

    Research output: Contribution to journal › Article › Research

  50. Published

    Co-precipitation on the basal and prismatic planes in Mg–Gd–Ag–Zr alloy subjected to over-ageing

    Li, J., Hage, F. S., Gholinia, A., Xie, P., Zhang, Y., Wu, Y., Peng, L., Haigh, S. J., Ramasse, Q. M. & Schumacher, P., 1 Jan 2018, Magnesium Technology 2018. Springer International Publishing, p. 379-383 5 p. (Minerals, Metals and Materials Series; vol. Part F7).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties

    Schuh, B., Völker, B., Todt, J., Schell, N., Perrière, L., Li, J., Couzinié, J. P. & Hohenwarter, A., 1 Jan 2018, In: Acta materialia. 142.2018, 1 January, p. 201-212 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Determining casting defects in near-net shape casting aluminium parts by computed tomography

    LI, J., Oberdorfer, B., Habe, D. & Schumacher, P., 2018, In: Frontiers of Mechanical Engineering. 13, 1, p. 48-52 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Effect of trace elements on microstructure and material properties of an aluminium alloy

    Pabel, T., Petkov, T., Schröttner, H., Albu, M., Rossmann-Perner, A., Schumacher, P. & LI, J., 2018, Proceedings of 73rd World Foundry Congress "Creative Foundry". p. 69-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Effects of trace elements on microstructure and material properties of an aluminium alloy

    Pabel, T., Petkov, T., Schröttner, H., Albu, M., Rossmann-Perner, A. & Schumacher, P., 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 5 6 7 8 9 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 3301