Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, ‎1073-5615

Journal

ISSNs1073-5615, 1543-1916
Additional searchable ISSN (electronic)1543-1916
1 - 57 out of 57Page size: 100

Research output

  1. 2024
  2. Published

    Development of a Dross Build-Up Growth Process Model for Hot-Dip Galvanizing Considering Surface Reaction Kinetics

    Reiss, G., Eßl, W., Trasca, R. A., Mugrauer, C., Stefan-Kharicha, M., Kharicha, A., Gerold, E. & Goodwin, F., Feb 2024, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 55.2024, February, p. 53-63 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Assessment of URANS-Type Turbulent Flow Modelling of a Single Port Submerged Entry Nozzle (SEN) for Thin Slab Continuous Casting (TSC) Process

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., 2024, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 2024, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2023
  5. Published

    Liquefaction Controlling Components and Their Effect on Carbon-Free Mold Powders

    Gruber, N., 30 Aug 2023, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 54.2023, December, p. pages 3092–3100 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Solidification Principle in Large Vertical Steel Casting Under the EMS Effect

    Zhang, Z., Wu, M., Zhang, H., Hahn, S., Wimmer, F., Ludwig, A. & Kharicha, A., 19 May 2023, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 54.2023, August, p. 1078-1085 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Modeling the Residence Time of Metal Droplets in Slag During BOF Steelmaking

    Mitas, B., Visuri, V. V. & Schenk, J., 17 May 2023, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 54.2023, August, p. 1938–1953 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Cyclic Solid-Liquid Phase Transformations in the CaO – SiO 2 System—Experiments and Modelling

    Ogris, D., Kircher, V. & Gamsjäger, E., 19 Apr 2023, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 54.2023, June, p. 1555-1564 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Characterisation of Secondary Copper Smelting Slag With Transmission Electron Microscopy

    Kleeberg, C., Cattini, L., Kremmer, T. & Antrekowitsch, J., 11 Apr 2023, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 54B.2023, 3, p. 1593-1603 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Phase Transition of Magnetite Ore Fines During Oxidation Probed by In Situ High-Temperature X-Ray Diffraction

    Zheng, H., Daghagheleh, O., Ma, Y., Taferner, B., Schenk, J. & Kapelyushin, Y., 13 Mar 2023, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 54.2023, 3, p. 1195-1204 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Modeling Framework for the Simulation of an Electric Smelting Furnace Considering Freeze Lining Formation

    Gomes Rodrigues, C., Wu, M., Ishmurzin, A., Hackl, G., Voller, N., Ludwig, A. & Kharicha, A., 21 Feb 2023, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 54.2023, April, p. 880-894 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2022
  13. E-pub ahead of print

    Mathematical Modeling of the Ejected Droplet Size Distribution in the Vicinity of a Gas–Liquid Impingement Zone

    Mitas, B., Visuri, V. V. & Schenk, J., 16 Aug 2022, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 53.2022, October, p. 3083–3094 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Experimental Evaluation of MHD Modeling of EMS During Continuous Casting

    Zhang, H., Wu, M., Zhang, Z., Ludwig, A., Kharicha, A., Rónaföldi, A., Roósz, A., Veres, Z. & Svéda, M., Aug 2022, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 53.2022, 4, p. 2166-2181 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    Surface Morphology and Structural Evolution of Magnetite-Based Iron Ore Fines During the Oxidation

    Zheng, H., Schenk, J., Xu, R., Daghagheleh, O., Spreitzer, D., Wolfinger, T., Yang, D. & Kapelyushin, Y., 23 Mar 2022, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 53.2022, 3, p. 1644-1660 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2021
  17. Published

    Influence of a Prior Oxidation on the Reduction Behavior of Magnetite Iron Ore Ultra-Fines Using Hydrogen

    Wolfinger, T., Spreitzer, D., Zheng, H. & Schenk, J., 21 Dec 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Mathematical Modeling of the Early Stage of Clogging of the SEN During Continuous Casting of Ti-ULC Steel

    Barati, H., Wu, M., Michelic, S., Ilie, S., Kharicha, A., Ludwig, A. & Kang, Y. B., 20 Oct 2021, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52.2021, 6, p. 4167-4178 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    A Numerical Study on the Influence of an Axial Magnetic Field (AMF) on Vacuum Arc Remelting (VAR) Process

    Karimi Sibaki, E., Kharicha, A., Abdi, M., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., Oct 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 5, p. 3354-3362 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Evaluation of Dissolution Rate and Behavior of MgO Carriers for Primary and Secondary Metallurgical Slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Roessler, R., Oct 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 5, p. 2939-2950 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Generation of Reverse Meniscus Flow by Applying An Electromagnetic Brake

    Vakhrushev, A., Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Eckert, S., 6 Jul 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52.2021, 5, p. 3193-3207 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    An Assessment of Analytical Liquidus Equations for Fe-C-Si-Mn-Al-P-Alloyed Steels Using DSC/DTA Techniques

    Bernhard, M. C., Presoly, P., Bernhard, C., Hahn, S. & Ilie, S., 29 Jun 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52.2021, 5, p. 2821-2830 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Effect of Prior Oxidation on the Reduction Behavior of Magnetite-Based Iron Ore During Hydrogen-Induced Fluidized Bed Reduction

    Zheng, H., Spreitzer, D., Wolfinger, T., Schenk, J. & Xu, R., 1 Jun 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52.2021, 4, p. 1955-1971 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Modeling of the BOF Tapping Process: The Reactions in the Ladle

    You, D., Bernhard, C., Mayer, P., Fasching, J., Kloesch, G., Rössler, R. & Ammer, R., Jun 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52.2021, 3, p. 1854-1865 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. E-pub ahead of print

    Statistical Analysis of the Inclusions in Rare Earth-M (M = Ca and Ti) Treated Steel

    Xie, Y., Song, M., Wang, B., Zhu, H., Xue, Z., Mayerhofer, A., Michelic, S. K., Bernhard, C. & Schenk, J., 29 Apr 2021, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Thermodynamic Refractory Corrosion Model for Ferronickel Manufacturing

    Sagadin, C., Luidold, S., Wagner, C., Pichler, C., Kreuzer, D., Spanring, A., Antrekowitsch, H., Clarke, A. & Clarke, K., 24 Feb 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52.2021, 2, p. 1052-1060 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Carbothermic Reduction of Zinc Containing Industrial Wastes: A Kinetic Model

    Leuchtenmüller, M., Legerer, C., Brandner, U. & Antrekowitsch, J., Feb 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 1, p. 548-557 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. 2020
  29. Published

    Electric Current Distribution During Electromagnetic Braking in Continuous Casting

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2 Sept 2020, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 6, p. 2811-2828 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    A Numerical Investigation on the Electrochemical Behavior of CaO and Al2O3 in the ESR Slags

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 20 Feb 2020, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 3, p. 871-879 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Gibbs Energy Modeling of the Cu-S Liquid Phase: Completion of the Thermodynamic Calculation of the Cu-S System

    Waldner, P., 20 Feb 2020, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 2, p. 805-817 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Effect of CO2 and O2 Mixed Injection on the Decarburization and Manganese Retention in High-Mn Twinning-Induced Plasticity Steels

    Liu, H., Liu, J., Schenk, J., Penz, F. M., Sun, L., Zhang, R. & An, Z., 3 Feb 2020, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 2, p. 756-762 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2019
  34. E-pub ahead of print

    A Parametric Study of the Vacuum Arc Remelting (VAR) Process: Effects of Arc Radius, Side-Arcing, and Gas Cooling

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 29 Oct 2019, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 1, p. 222-235 p 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    A Kinetic Study Investigating the Carbothermic Recovery of Chromium from a Stainless-Steel Slag

    Leuchtenmüller, M., Antrekowitsch, J. & Steinlechner, S., 29 Jul 2019, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 5, p. 2221-2228 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Iron Ore Reduction by Hydrogen Using a Laboratory Scale Fluidized Bed Reactor: Kinetic Investigation—Experimental Setup and Method for Determination

    Spreitzer, D. & Schenk, J., 24 Jul 2019, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 5, p. 2471-2484 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    A Comprehensive Analysis of Macrosegregation Formation During Twin-Roll Casting

    Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 15 Jun 2019, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 3, p. 1334-1350 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Kinetics and Mechanisms of Dolime Dissolution in Steelmaking Slag

    Cheremisina, E., Schenk, J., Nocke, L., Paul, A. & Wimmer, G., 1 Jan 2019, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 3, p. 1269 - 1276 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Calculation Accuracy and Efficiency of a Transient Model for Submerged Entry Nozzle Clogging

    Barati, H., Wu, M., Ludwig, A. & Kharicha, A., 2019, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 3, p. 1429-1443 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2018
  41. Published

    Scale-Adaptive Simulation of Transient Two-Phase Flow in Continuous-Casting Mold

    Liu, Z., Vakhrushev, A., Wu, M., Kharicha, A., Ludwig, A. & Li, B., 30 Oct 2018, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 1, p. 543-554 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Fluid Force-Induced Detachment Criteria for Nonmetallic Inclusions Adhered to a Refractory/Molten Steel Interface

    Dieguez Salgado, U., Weiß, C., Michelic, S. K. & Bernhard, C., 1 Aug 2018, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 49, 4, p. 1632-1643 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. E-pub ahead of print

    Archaeological Arsenical Bronzes and Equilibrium in the As-Cu System

    Mödlinger, M., Cziegler, A., Macció, D., Schnideritsch, H. & Sabatini, B., 10 Jul 2018, (E-pub ahead of print) In: Metallurgical and Materials Transactions B, Process metallurgy and materials processing science. 2018, 49/5, p. 2505-2513 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Modified DHTT Equipment for Crystallization Studies of Mold Slags

    Kölbl, N., Harmuth, H. & Marschall, I., 9 Apr 2018, In: Metallurgical and Materials Transactions B, Process metallurgy and materials processing science. 2018, 49/4, p. 1898-1909 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Heat Transfer Coefficient at Cast-Mold Interface During Centrifugal Casting: Calculation of Air Gap

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M. & Karimi-Sibaki, E., 12 Mar 2018, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 49.2018, 3, p. 1421-1433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. 2017
  47. Published

    Gibbs Energy Modeling of Digenite and Adjacent Solid-State Phases

    Waldner, P., 27 May 2017, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48.2017, August, p. 2157-2166 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    On the Capability of Nonmetallic Inclusions to Act as Nuclei for Acicular Ferrite in Different Steel Grades

    Loder, D., Michelic, S. K., Mayerhofer, A. & Bernhard, C., 4 May 2017, In: Metallurgical and Materials Transactions B, Process metallurgy and materials processing science. 48.2017, 4, p. 1992-2006 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Thermodynamic and Experimental Investigations of High-Temperature Refractory Corrosion by Molten Slags

    Wagner, C., Wenzl, C., Gregurek, D., Kreuzer, D., Luidold, S. & Schnideritsch, H., 1 Feb 2017, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48.2017, February, p. 119-131 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. 2016
  51. Published

    Simulation of the Electric Signal During the Formation and Departure of Droplets in the Electroslag Remelting Process

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 25 Jan 2016, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 47.2016, 2, p. 1427-1434 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Simulation of the Electrical Signal During the Formation and Departure of Droplets in the Electro Slag Remelting Process

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2016, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

    Research output: Contribution to journal › Article › Research › peer-review

  53. 2015
  54. E-pub ahead of print

    A Dynamic Mesh-Based Approach to Model Melting and Shape of an ESR Electrode

    Karimi-Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 11 Jun 2015, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 46.2015, 5, p. 2049-2061 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. 2014
  56. Published

    Numerical Investigation of Shell Formation in Thin Slab Casting of Funnel-Type Mold

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 20 Feb 2014, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 45.2014, 3, p. 1024-1037 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Austenite Grain Growth and the Surface Quality of Continuously Cast Steel

    Dippenaar, R., Bernhard, C., Schider, S. & Wieser, G., 2014, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 45B, p. 409-418

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Modeling of Multiscale and Multiphase Phenomena in Materials Processing

    Ludwig, A., Kharicha, A. & Wu, M., 2014, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 45.2014, 1, p. 36-43 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. 2013
  60. Published

    Numerical investigation of shell formation in thin slab casting of funnel-type mould

    Vakhrushev, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G. & Nitzl, G., 2013, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

    Research output: Contribution to journal › Article › Research › peer-review

  61. 2011
  62. Published

    Measuring mechanical behavior of steel during solidification: Modeling the SSCC test

    Rowan, M., Thomas, B., Pierer, R. & Bernhard, C., 2011, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 42, 4, p. 837-851

    Research output: Contribution to journal › Article › Research › peer-review

  63. 2010
  64. Published

    Effect of Carbon Aggregates on the Properties of Carbon Refractories for a Blast Furnace

    Chen, X., Li, Y., Li, Y., Sang, S., Zhao, L., Li, S., Jin, S. & Ge, S., Apr 2010, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 41, 2, p. 420-429

    Research output: Contribution to journal › Article › Research › peer-review

  65. 2009
  66. Published

    Characterization of the Melt Quality and Impurity Content of an Lm25 Alloy

    Haberl, K., Schumacher, P., Geier, G. F. & Stauder, B., 2009, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 40B, p. 812-821

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    The validation of a multiphase model for the macrosegregations and primary structure of high grade steel ingots

    Tanzer, R., Schützenhöfer, W., Reiter, G., Fauland, H. P., Könözsy, L., Ishmurzin, A., Wu, M. & Ludwig, A., 2009, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 40, p. 305-311

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Validation of a Multiphase Model for the Macrosegregation and Primary Structure of High Grade Steel Ingots

    Ishmurzin, A., Tanzer, R., Schuetzenhoefer, W., Reiter, G., Fauland, H. P., Könözsy, L., Wu, M. & Ludwig, A., 2009, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 40, p. 305-311

    Research output: Contribution to journal › Article › Research › peer-review

  69. 2008
  70. Published

    A model for predicting the austenite grain size at the surface of continuously cast slabs

    Bernhard, C., Reiter, J. & Presslinger, H., 2008, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 39, p. 885-895

    Research output: Contribution to journal › Article › Research › peer-review

  71. 2006
  72. Published

    Iron ore reduction in a continuously operated multistage lab-scale fluidized bed reactor—Mathematical modeling and experimental results

    Thurnhofer, A., Schuster, S., Löffler, G., Habermann, A., Winter, F., Hofbauer, H., Schenk, J. & Zirngast, J., 2006, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 37.2006, August, p. 655-673 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. 2004
  74. Published

    Critical Thermodynamic Assessment and Modeling of the Fe-Ni-S System

    Waldner, P. & Pelton, A. D., 2004, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 35B, p. 897-907

    Research output: Contribution to journal › Article › Research › peer-review

  75. 2003
  76. Published

    Macro- and Microscopic Coupled Numerical Simulation of Microsegregation during Diffusion Controlled Solidification of Multi-Component Alloys

    Ludwig, A., Sahm, P. & Pustal, B., 2003, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. p. 411-419

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations