Materials and Design, ‎0264-1275

Journal

ISSNs0264-1275, 0261-3069
Additional searchable ISSN (electronic)1873-4197
21 - 40 out of 104Page size: 20

Research output

  1. 2023
  2. Published

    Precious metal amorphous AgAuSi: Alloy design by swapping gold for silver

    Weniger, L.-M., Gammer, C., Niewczas, M., Cordill, M. J., Spieckermann, F., Djemia, P., Faurie, D., Li, C.-H., Lassnig, A., Terziyska, V., Mitterer, C., Eckert, J. & Glushko, O., 17 Jun 2023, In: Materials and Design. 232.2023, August, 11 p., 112099.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    In situ fragmentation of Al/Al2O3 multilayers on flexible substrates in biaxial tension

    Putz, B., Edwards, T. E. J., Huszar, E., Pethö, L., Kreiml, P., Cordill, M. J., Thiaudière, D., Chiroli, S., Faurie, D., Renault, P.-O. & Michler, J., 12 Jun 2023, In: Materials and Design. 232.2023, August, 15 p., 112081.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Evaluation of combinatorial algorithms for optimizing highly nonlinear structural problems

    Rettl, M., Pletz, M. & Schuecker, C., 28 Apr 2023, (E-pub ahead of print) In: Materials and Design. 230.2023, June, 15 p., 111958.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Inverse parameter determination for metal foils in multifunctional composites

    Trost, C. O. W., Krobath, M., Žák, S., Hammer, R., Krivec, T., Gänser, H.-P., Trost, T. W., Hohenwarter, A. & Cordill, M. J., 9 Feb 2023, (E-pub ahead of print) In: Materials and Design. 227.2023, March, 13 p., 111711.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2022
  7. E-pub ahead of print

    An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®

    Schimbäck, D., Mair, P., Kaserer, L., Perfler, L., Palm, F., Leichtfried, G. & Pogatscher, S., 22 Nov 2022, (E-pub ahead of print) In: Materials and Design. 224.2022, December, 11 p., 111410.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Design of oxygen-doped TiZrHfNbTa refractory high entropy alloys with enhanced strength and ductility

    Iroc, L. K., Tukac, O. U., Tanrisevdi, B. B., El-Atwani, O., Tunes, M., Kalay, Y. E. & Aydogan, E., Nov 2022, In: Materials and Design. 223.2022, November, 12 p., 111239.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Interface mediated deformation and fracture of an elastic–plastic bimaterial system resolved by in situ transmission scanning electron microscopy

    Alfreider, M., Balbus, G., Wang, F., Zechner, J., Gianola, D. S. & Kiener, D., 14 Sept 2022, (E-pub ahead of print) In: Materials and Design. 223.2022, November, 17 p., 111136.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    New-generation biocompatible Ti-based metallic glass ribbons for flexible implants

    Yüce, E., Zarazúa-Villalobos, L., Ter-Ovanessian, B., Sharifikolouei, E., Najmi, Z., Spieckermann, F., Eckert, J. & Sarac, B., 13 Sept 2022, In: Materials and Design. 223.2022, November, 13 p., 111139.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    In situ micromechanical analysis of a nano-crystalline W-Cu composite

    Burtscher, M., Alfreider, M., Kainz, C., Schmuck, K. S. & Kiener, D., Aug 2022, In: Materials and Design. 220.2022, August, 9 p., 110848.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Residual stress distribution of a locally and inductively quenched and tempered 50CrMo4 steel analysed by synchrotron transmission techniques

    Jászfi, V., Prevedel, P., Raninger, P., Todt, J., Mevec, D., Godai, Y., Maawad, E. & Ebner, R., 16 Jul 2022, (E-pub ahead of print) In: Materials & design. 221.2022, September, 9 p., 110936.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Influence of layer architecture on fracture toughness and specimen stiffness in polymer multilayer composites

    Wiener, J., Arbeiter, F., Kolednik, O. & Pinter, G., Jul 2022, In: Materials and Design. 219.2022, July, 10 p., 110828.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Structural characterisation of Cu-Zr thin film combinatorial libraries with synchrotron radiation at the limit of crystallinity

    Putz, B., Milkovič, O., Mohanty, G., Ipach, R., Pethö, L., Milkovičová, J., Maeder, X., Edwards, T. E. J., Schweizer, P., Coduri, M., Saksl, K. & Michler, J., Jun 2022, In: Materials and Design. 218.2022, June, 12 p., 110675.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Influence of grain aspect-ratio on the fracture properties of ultrafine-grained tantalum

    Hohenwarter, A., Rockenschaub, M. & Renk, O., Apr 2022, In: Materials and Design. 216.2022, April, 11 p., 110545.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy

    Zhang, Z., Ketov, S. V., Fellner, S., Sheng, H., Mitterer, C., Song, K. K., Gammer, C. & Eckert, J., 10 Mar 2022, In: Materials and Design. 216.2022, April, 8 p., 110530.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Effect of crystal orientation on the hardness and strength of piezoelectric LiNbO3 substrates for microelectronic applications

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 2022, In: Materials and Design. 213, 110306.

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2021
  19. Published

    How electron beam melting tailors the Al-sensitive microstructure and mechanical response of a novel process-adapted y-TiAl based alloy

    Wimler, D., Käsznar, K., Musi, M., Breuning, C., Markl, M., Keckes, J., Clemens, H., Körner, C. & Mayer, S., 15 Dec 2021, In: Materials and Design. 212.2021, 15 December, 13 p., 110187.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Porosity and thickness effect of Pd–Cu–Si metallic glasses on electrocatalytic hydrogen production and storage

    Sarac, B., Karazehir, T., Yüce, E., Mühlbacher, M., Sarac, A. S. & Eckert, J., 7 Sept 2021, In: Materials and Design. 210.2021, 15 November, 9 p., 110099.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Correlating point defects with mechanical properties in nanocrystalline TiN thin films

    Zhang, Z., Ghasemi, A., Koutná, N., Xu, Z., Grünstäudl, T., Song, K., Holec, D., He, Y., Mayrhofer, P. H. & Bartosik, M., Sept 2021, In: Materials and Design. 207.2021, September, p. 1-10 109844.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Direct observation of nanocrystal-induced enhancement of tensile ductility in a metallic glass composite

    Gammer, C., Rentenberger, C., Beitelschmidt, D., Minor, A. M. & Eckert, J., 9 Jul 2021, In: Materials and Design. 209.2021, 1 November, 6 p., 109970.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Observations of crystal strains in filler and QI particles through TEM examination – Effect of processing and grain size

    Arregui-Mena, J. D., Worth, R. N., Tunes, M. & Edmondson, P. D., Jun 2021, In: Materials and Design. 204.2021, June, 7 p., 109673.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations