Advanced engineering materials, ‎1527-2648

Journal

ISSNs1527-2648, 1438-1656
Additional searchable ISSN (electronic)1527-2648
1 - 50 out of 130Page size: 50

Research output

  1. 2024
  2. Published

    Unveiling the Effect of Grain Size on Biodegradation of Magnesium

    Medeiros, M. P., Lopes, D. R., Carvalho, A. P., Hohenwarter, A., Kawasaki, M., Cupertino-Malheiros, L. & Figueiredo, R. B., 4 Oct 2024, In: Advanced Engineering Materials. 26.2024, 22, 9 p., 2401605.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Editorial for the Special Issue on the Occasion of Reinhard Pippan's 70th Birthday: Celebrating a Legacy of Innovation and Excellence in Material Science

    Kiener, D. & Hohenwarter, A., Oct 2024, In: Advanced Engineering Materials. 26.2024, 19, 4 p., 2401772.

    Research output: Contribution to journal › Editorial › peer-review

  4. Published

    Fracture Toughness Investigations of an Ion-Irradiated Nanocrystalline TiZrNbHfTa Refractory High-Entropy Alloy

    Moschetti, M., Hohenwarter, A., Alfreider, M., Couzinié, J.-P., Wei, T., Davis, J., Xu, A., Bhattacharyya, D., Kruzic, J. J. & Gludovatz, B., Oct 2024, In: Advanced Engineering Materials. 26.2024, 19, 9 p., 2400541.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Investigation of Phase Transformations and Ordering Mechanisms in a Pd–Cu–Ag–Ru Alloy

    Lumper, L., Fecher, J., Stark, A. & Maier-Kiener, V., Oct 2024, In: Advanced engineering materials. 26.2024, 19, 10 p., 2400255.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Achieving Superior Strength-ductility-conductivity Combination in TiB2p 6201 Composites via Particle Rotation and Sub-grain Refinement

    Zhao, K., Li, X., Liu, X., Shi, S., Guo, E., Kang, H., Hao, Z., LI, J., Zhang, Y., Chen, Z. & Wang, T., Jul 2024, In: Advanced engineering materials. 26.2024, 13, 13 p., 2400531.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Limitations of Hydrogen Detection After 150 Years of Research on Hydrogen Embrittlement

    Tunes, M. A., Uggowitzer, P., Dumitraschkewitz, P., Willenshofer, P., Samberger, S., da Silva, F., Schön, C. G., Kremmer, T., Antrekowitsch, H., Djukic, M. & Pogatscher, S., 25 Jun 2024, (E-pub ahead of print) In: Advanced Engineering Materials. 26.2024, 19, 18 p., 2400776.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    High-Throughput First-Principles Calculations and Machine Learning of Grain Boundary Segregation in Metals

    Scheiber, D., Razumovskiy, V. I., Peil, O. E. & Romaner, L., 21 Jun 2024, In: Advanced engineering materials. 26.2024, 19, 18 p., 2400269.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Saturation of grain fragmentation upon severe plastic Deformation: Fact or fiction?

    Renk, O., Hohenwarter, A., Edalati, K. & Kapp, M. W., 14 Jun 2024, In: Advanced engineering materials. 26.2024, 19, 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Exploring Refinement Characteristics in FeTi–Cux Composites: A Study of Localization and Abrasion Constraints

    Schweiger, L., Spieckermann, F., Buchebner, N., Keckes, J. F., Kiener, D. & Eckert, J., 8 Jun 2024, In: Advanced Engineering Materials. 26.2024, 19, 12 p., 2400593.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Metallographic Etching of Al–Mg–Zn–(Cu) Crossover Alloys

    Samberger, S., Kremmer, T., Stemper, L., Tourey, S., Uggowitzer, P. & Pogatscher, S., 25 Apr 2024, In: Advanced engineering materials. 26.2024, 19, 7 p., 2400576.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Dual-Wavelength Vat Photopolymerization 3D Printing with Hybrid Acrylate-Epoxy Resins: Influence of Resin Composition on Microstructure and Mechanical Properties

    Cazin, I., Plevová, K., Alabiso, W., Vidović, E. & Schlögl, S., Apr 2024, In: Advanced Engineering Materials. 26.2024, 8, 12 p., 2301699.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Optimizing Size and Number Density of Al3Zr Dispersoids in Al–Zn–Mg–Cu Alloys

    Honaramooz, M. T., Morak, R. & Paris, O., 16 Mar 2024, In: Advanced Engineering Materials. 26.2024, 19, 7 p., 2400353.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Evaluating High-Pressure Torsion Scale-Up

    Reis, L. M., Hohenwarter, A., Kawasaki, M. & Figueiredo, R. B., 22 Feb 2024, In: Advanced Engineering Materials. 26.2024, 19, 11 p., 2400175.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Interface engineering at the nanoscale: Synthesis of low-energy boundaries

    Kapp, M., Eckert, J. & Renk, O., 2024, In: Advanced engineering materials. 26.2024, 19, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2023
  17. Published

    Metal–Matrix Composites from High-Pressure Torsion with Functionalized Material Behavior

    Lemkova, V., Todt, J., Motz, C. & Schaefer, F., Oct 2023, In: Advanced Engineering Materials. 25.2023, 20, 12 p., 2201565.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Accepted/In press

    The Influence of Phase Formation on Irradiation Tolerance in a Nanocrystalline TiZrNbHfTa Refractory High-Entropy Alloy

    Moschetti, M., Xu, A., Hohenwarter, A., Wei, T., Davis, J., Short, K., Thorogood, G. J., Kong, C., Couzinié, J.-P., Bhattacharyya, D., Kruzic, J. J. & Gludovatz, B. P., 9 Aug 2023, (Accepted/In press) In: Advanced Engineering Materials. 26.2024, 4, 11 p., 2300863.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Alloying elements in intermetallic γ-TiAl based alloys – A review on their influence on phase equilibria and phase transformations

    Musi, M., Graf, G., Clemens, H. & Spörk-Erdely, P., 9 Jul 2023, (E-pub ahead of print) In: Advanced engineering materials. 26.2024, 4, 26 p., 2300610.

    Research output: Contribution to journal › Review article › peer-review

  20. Published

    In Situ Observations of the Microstructural Evolution during Heat Treatment of a PH 13-8 Mo Maraging Steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Gruber, C., Stockinger, M. & Schnitzer, R., Jun 2023, In: Advanced engineering materials. 25.2023, 12, 12 p., 2300410.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing

    Jelinek, A., Žák, S., Alfreider, M. & Kiener, D., 3 Apr 2023, In: Advanced engineering materials. 25.2023, 7, 10 p., 2200288.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    Optimization of the Two- and Three-DimensionalCharacterization of Rare Earth-Traced Deoxidation Products

    Thiele, K., Musi, R., Ramesh Babu, S. & Michelic, S. K., 15 Feb 2023, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 11, 12 p., 2201748.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Novel Approach for Assessing Cyclic Thermomechanical Behavior of Multilayered Structures

    Seligmann, B., Alfreider, M., Wurmshuber, M. & Kiener, D., Feb 2023, In: Advanced engineering materials. 25.2023, 3, 10 p., 2201209.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Influence of Processing Route on the Fracture Resistance of Equal Channel Angular Pressing Deformed Iron

    Hohenwarter, A. & Pippan, R., Jan 2023, In: Advanced engineering materials. 25.2023, 1, 9 p., 2201011.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Electromechanical Behavior of Al/Al2O3 Multilayers on Flexible Substrates: Insights from In Situ Film Stress and Resistance Measurements

    Putz, B., Edwards, T. E. J., Huszar, E., Gruber, P. A., Gradwohl, K.-P., Kreiml, P., Többens, D. & Michler, J., 2023, In: Advanced engineering materials. 24.2022, 15 p., 2200951.

    Research output: Contribution to journal › Article › Research › peer-review

  26. 2022
  27. E-pub ahead of print

    On the Temperature-Induced Equilibration of Phase Distribution and Microstructure in a Gas-Atomized Titanium Aluminide Powder

    Musi, M., Clemens, H., Stark, A. & Spörk-Erdely, P., 26 Nov 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 6, 6 p., 2201242.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    3D Printing of Dual-Cure Networks Based on (Meth)acrylate/Bispropargyl Ether Building Blocks

    Sommer, K., Rieger, P., Müller, S. M., Schwarz, R., Trimmel, G., Feuchter, M. & Grießer, T., 29 Sept 2022, (E-pub ahead of print) In: Advanced engineering materials. 2022, 7 p., 2200901.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Ab initio study of alloying Impact on the stability of cementite in transformation-Induced plasticity-assisted advanced steels

    Sakic, A., Hofer, C., Schnitzer, R. & Holec, D., 18 Sept 2022, In: Advanced engineering materials. 24.2022, 11, 10 p., 2200532.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    High-Entropy Alloy-Induced Metallic Glass Transformation: Challenges Posed by in situ Alloying via Additive Manufacturing

    Hadibeik Neishaboori, S., Spieckermann, F., Nosko, M., Khodabakhshi, F., Heydarzadeh Sohi, M. & Eckert, J., 18 Aug 2022, (E-pub ahead of print) In: Advanced engineering materials. 24.2022, 2200764.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laserbeam Powder Bed Fused S316L Steel

    Bodner, S., Hlushko, K., Kutleša, K., Todt, J., Renk, O., Meindlhumer, M., Resch, F., Nielsen, M.-A., Keckes, J. & Eckert, J., 2 Aug 2022, In: Advanced engineering materials. 2022, 25 p., 2200524.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Novel Additive Manufacturing Materials for Waste Heat Deduction

    Schuschnigg, S., Hufnagl, M., Holzer, C., Eder, F., Kroke, E., Schallmeiner, S., Regula, C., Hamedi, Y., Grosche, C., Morganti, E. & Seidler, K., 29 Jul 2022, In: Advanced engineering materials. 2022, 10 p., 22006714.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    3D Printing of Soft Magnetoactive Devices with Thiol-Click Photopolymer Composites

    Rossegger, E., Höller, R., Hrbinič, K., Sangermano, M., Griesser, T. & Schlögl, S., 26 Jul 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2022, 7, 9 p., 2200749.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Determination of Cyclic Load Limits for Plasma-Sprayed Copper Tracks on Material Extrusion-Based Printed Surfaces

    Stiller, T., Hausberger, A., Berer, M., Schwan, A. M., Hinterer, A., Spalt, S., Pinter, G. G. & Lackner, J. M., 19 Jul 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 7, 12 p., 2200567.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Parameter Optimization of the ARBURG Plastic Freeforming Process by Means of a Design of Experiments Approach

    Hentschel, L., Petersmann, S., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U., Arbeiter, F. & Holzer, C., 31 May 2022, In: Advanced engineering materials. 24.2022, 11 p., 2200279.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    The Effects of Washing and Formaldehyde Sterilization on the Mechanical Performance of Poly(methyl Methacrylate) (PMMA) Parts Produced by Material Extrusion-Based Additive Manufacturing or Material Jetting

    Petersmann, S., Hentschel, L., Gonzalez-Gutierrez, J., Tödtling, M., Schäfer, U., Arbeiter, F. & Üçal, M., 13 May 2022, In: Advanced engineering materials. 24.2022, 2200225.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    Additive Manufacturing of CoCrFeMnNi High-Entropy Alloy/AISI 316L Stainless Steel Bimetallic Structures

    Sokkalingam, R., Chao, Z., Sivaprasad, K., Muthupandi, V., Jayaraj, J., Ramasamy, P., Eckert, J. & Prashanth, K. G., 27 Apr 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 7, 9 p., 2200341.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Multimaterial Extrusion-Based Additive Manufacturing of Compliant Crack Arrester: Influence of Interlayer Length, Thickness, and Applied Strain Rate

    Waly, C., Petersmann, S. & Arbeiter, F., 23 Feb 2022, In: Advanced engineering materials. 2022, 11 p., 2101703.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Stereolithographic 3D printing of ceramics: challenges and opportunities for structural integrity

    Lube, T., Staudacher, M., Hofer, A.-K., Schlacher, J. & Bermejo Moratinos, R., 2022, In: Advanced engineering materials. 2200520.

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2021
  41. Published

    On the Formation Mechanism of Banded Microstructures in Electron Beam Melted Ti–48Al–2Cr–2Nb and the Design of Heat Treatments as Remedial Action

    Wartbichler, R., Clemens, H., Mayer, S., Ghibaudo, C., Rizza, G., Galati, M., Iuliano, L., Biamino, S. & Ugues, D., Dec 2021, In: Advanced engineering materials. 23.2021, 12, 22 p., 2101199.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    In Situ Synchrotron X-Ray Diffraction during High-Pressure Torsion Deformation of Ni and NiTi

    Kerber, M. B., Spieckermann, F., Schuster, R., von Baeckmann, C., Fischer, T., Schell, N., Waitz, T. & Schafler, E., Nov 2021, In: Advanced engineering materials. 23, 11, 9 p., 2100159.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Electrons meet alloy development: A γ-TiAl-based alloy showcase

    Holec, D., Abdoshahi, N., Gehringer, D., Hatzenbichler, L., Sakic, A. & Clemens, H., 18 Sept 2021, In: Advanced engineering materials. 24.2022, 14 p., 2100977.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium

    Thompson, Y., Polzer, M., Gonzalez-Gutierrez, J., Kasian, O., Heckl, J. P., Dalbauer, V., Kukla, C. & Felfer, P., 12 Sept 2021, In: Advanced Engineering Materials. 23.2021, 12, 12 p., 2100380.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Influence of Gradient Residual Stress and Tip Shape on Stress Fields Inside Indented TiN Hard Coating

    Todt, J., Zalesak, J., Krywka, C. & Keckes, J., 11 Jul 2021, In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Additive Manufacturing of Aluminum-Based Metal Matrix Composites—A Review

    Tang, S., Ummethala, R., Suryanarayana, C., Eckert, J., Prashanth, K. G. & Wang, Z., Jul 2021, In: Advanced engineering materials. 23.2021, 7, 17 p., 2100053.

    Research output: Contribution to journal › Review article › peer-review

  47. E-pub ahead of print

    In Situ Investigation of the Rapid Solidification Behavior of Intermetallic γ-TiAl-Based Alloys Using High-Energy X-Ray Diffraction

    Graf, G., Rosigkeit, J., Krohmer, E., Staron, P., Krenn, R., Clemens, H. & Spörk-Erdely, P., 23 Jun 2021, (E-pub ahead of print) In: Advanced engineering materials. 23.2021, 11, 7 p., 2100557 .

    Research output: Contribution to journal › Article › Research › peer-review

  48. 2020
  49. Published

    Exploring structural changes, manufacturing, joining, and repair of intermetallic γ-TiAl-based alloys: Recent progress enabled by in situ synchrotron X-Ray techniques

    Spörk-Erdely, P., Staron, P., Liu, J., Kashaev, N., Stark, A., Hauschildt, K., Maawad, E., Mayer, S. & Clemens, H., 19 Dec 2020, In: Advanced engineering materials. 23.2020, 11, 32 p., 2000947.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Selective Laser Melting of a Near-alpha Ti6242S Alloy for High-Performance Automotive Parts

    Fleißner-Rieger, C., Pfeifer, T., Jörg, T., Kremmer, T., Brabetz, M., Clemens, H. & Mayer, S., 17 Dec 2020, In: Advanced engineering materials. 2021, p. 1-12 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. E-pub ahead of print

    Defects in a laser powder bed fused tool steel

    Platl, J., Leitner, H., Turk, C., Demir, A. G., Previtali, B. & Schnitzer, R., 13 Oct 2020, (E-pub ahead of print) In: Advanced engineering materials. 2020, 2000833, 11 p., 2000833 .

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Corrosion in Hank's Solution and Mechanical Strength of Ultrafine-Grained Pure Iron

    Batista, B. A., Soares, R. B., Lins, V. D. F. C., Figueiredo, R. B., Hohenwarter, A. & Matencio, T., 20 Mar 2020, In: Advanced engineering materials. 22.2020, 7, 8 p., 2000183.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Microstructure and Failure Characteristics of Nanostructured Molybdenum–Copper Composites

    Schwarz, K. T., Rosalie, J. M., Wurster, S., Pippan, R. & Hohenwarter, A., 1 Jan 2020, In: Advanced engineering materials. 22.2020, 1, 10 p., 1900474.

    Research output: Contribution to journal › Article › Research › peer-review

  54. 2019
  55. Published

    Electron beam melting of a β-solidifying intermetallic titanium aluminide alloy

    Wartbichler, R., Clemens, H. & Mayer, S., 1 Dec 2019, In: Advanced engineering materials. 21.2019, 12, 5 p., 1900800.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Nanostructured metallic materials and composites: Processes, properties and microstructures

    Bachmaier, A., Hohenwarter, A., Höppel, H. W. & Ivanisenko, J., Jan 2019, In: Advanced engineering materials. 21.2019, 1, 2 p., 1801073.

    Research output: Contribution to journal › Editorial › peer-review

Previous 1 2 3 Next
View graph of relations