Estimates of Individual Fracture Compliances Along Boreholes From Full-Waveform Sonic Log Data

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Estimates of Individual Fracture Compliances Along Boreholes From Full-Waveform Sonic Log Data. / Barbosa, Nicolas D.; Greenwood, Andrew; Caspari, Eva et al.
in: Journal of geophysical research, Jahrgang 126.2021, Nr. 5, e2021JB022015, 27.04.2021.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Barbosa ND, Greenwood A, Caspari E, Dutler N, Hollinger K. Estimates of Individual Fracture Compliances Along Boreholes From Full-Waveform Sonic Log Data. Journal of geophysical research. 2021 Apr 27;126.2021(5):e2021JB022015. doi: https://doi.org/10.1029/2021JB022015

Bibtex - Download

@article{c7ce650d177245f288a112fe8baf7307,
title = "Estimates of Individual Fracture Compliances Along Boreholes From Full-Waveform Sonic Log Data",
abstract = "An important seismic attenuation mechanism in fractured environments is related to energy conversion into reflected and transmitted waves at fracture interfaces. Using full-waveform sonic (FWS) log data, we show that it is possible to quantify transmission losses across a set of fractures from time delays and amplitude differences of the critically refracted P-wave as compared to intact sections along the borehole. In the presence of fractures, the transmission coefficient associated with a given fracture is obtained by combining information on transmission losses from multiple receivers and source positions into a linear system of equations for all fractures intersecting the borehole. Fracture compliance is computed from the inferred transmission coefficient based on a linear slip model. For validation, we use synthetic FWS log data obtained from numerical simulations of wave propagation in a water-filled borehole surrounded by low-permeability rocks with discrete fractures. The methodology is then applied to field data acquired along boreholes penetrating multiple fractures in a granodioritic host rock. We show that our estimations of mechanical compliance are consistent with previously reported values, which were estimated for individual fractures intersecting one of the boreholes with a related method valid only for isolated single fractures. Comparison between our estimates of fracture compliance and transmissivity profiles from previous hydraulic characterizations of the fractures suggests that the proposed method may also allow to locate the most permeable fractures along a borehole, which, in turn, opens the perspective of enhancing the design and effectiveness of subsequent hydraulic testing and fracturing experiments.",
author = "Barbosa, {Nicolas D.} and Andrew Greenwood and Eva Caspari and Nathan Dutler and Klaus Hollinger",
note = "Publisher Copyright: {\textcopyright} 2021. American Geophysical Union. All Rights Reserved.",
year = "2021",
month = apr,
day = "27",
doi = "https://doi.org/10.1029/2021JB022015",
language = "English",
volume = "126.2021",
journal = "Journal of geophysical research",
issn = "2169-9313",
publisher = "American Geophysical Union",
number = "5",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Estimates of Individual Fracture Compliances Along Boreholes From Full-Waveform Sonic Log Data

AU - Barbosa, Nicolas D.

AU - Greenwood, Andrew

AU - Caspari, Eva

AU - Dutler, Nathan

AU - Hollinger, Klaus

N1 - Publisher Copyright: © 2021. American Geophysical Union. All Rights Reserved.

PY - 2021/4/27

Y1 - 2021/4/27

N2 - An important seismic attenuation mechanism in fractured environments is related to energy conversion into reflected and transmitted waves at fracture interfaces. Using full-waveform sonic (FWS) log data, we show that it is possible to quantify transmission losses across a set of fractures from time delays and amplitude differences of the critically refracted P-wave as compared to intact sections along the borehole. In the presence of fractures, the transmission coefficient associated with a given fracture is obtained by combining information on transmission losses from multiple receivers and source positions into a linear system of equations for all fractures intersecting the borehole. Fracture compliance is computed from the inferred transmission coefficient based on a linear slip model. For validation, we use synthetic FWS log data obtained from numerical simulations of wave propagation in a water-filled borehole surrounded by low-permeability rocks with discrete fractures. The methodology is then applied to field data acquired along boreholes penetrating multiple fractures in a granodioritic host rock. We show that our estimations of mechanical compliance are consistent with previously reported values, which were estimated for individual fractures intersecting one of the boreholes with a related method valid only for isolated single fractures. Comparison between our estimates of fracture compliance and transmissivity profiles from previous hydraulic characterizations of the fractures suggests that the proposed method may also allow to locate the most permeable fractures along a borehole, which, in turn, opens the perspective of enhancing the design and effectiveness of subsequent hydraulic testing and fracturing experiments.

AB - An important seismic attenuation mechanism in fractured environments is related to energy conversion into reflected and transmitted waves at fracture interfaces. Using full-waveform sonic (FWS) log data, we show that it is possible to quantify transmission losses across a set of fractures from time delays and amplitude differences of the critically refracted P-wave as compared to intact sections along the borehole. In the presence of fractures, the transmission coefficient associated with a given fracture is obtained by combining information on transmission losses from multiple receivers and source positions into a linear system of equations for all fractures intersecting the borehole. Fracture compliance is computed from the inferred transmission coefficient based on a linear slip model. For validation, we use synthetic FWS log data obtained from numerical simulations of wave propagation in a water-filled borehole surrounded by low-permeability rocks with discrete fractures. The methodology is then applied to field data acquired along boreholes penetrating multiple fractures in a granodioritic host rock. We show that our estimations of mechanical compliance are consistent with previously reported values, which were estimated for individual fractures intersecting one of the boreholes with a related method valid only for isolated single fractures. Comparison between our estimates of fracture compliance and transmissivity profiles from previous hydraulic characterizations of the fractures suggests that the proposed method may also allow to locate the most permeable fractures along a borehole, which, in turn, opens the perspective of enhancing the design and effectiveness of subsequent hydraulic testing and fracturing experiments.

UR - http://www.scopus.com/inward/record.url?scp=85106916957&partnerID=8YFLogxK

U2 - https://doi.org/10.1029/2021JB022015

DO - https://doi.org/10.1029/2021JB022015

M3 - Article

VL - 126.2021

JO - Journal of geophysical research

JF - Journal of geophysical research

SN - 2169-9313

IS - 5

M1 - e2021JB022015

ER -