Department Werkstoffwissenschaft

Organisation: Departments and Institute

Publikationen

  1. Veröffentlicht

    Neue scheidungshärtende Warmarbeitsstähle für temperaturwechselbeanspruchte Werkzeuge

    Erlach, S. D. & Clemens, H., 2005

    Publikationen: Buch/BerichtForschungsberichtTransfer(peer-reviewed)

  2. Veröffentlicht

    Isothermal aging kinetics of NiAl precipitates in a secondary hardening steel

    Erlach, S., Siller, I., Leitner, H. & Clemens, H., 2008, in: International journal of microstructure and materials properties (IJMMP). 3, S. 373-382

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  3. Veröffentlicht

    On the Precipitation Behavior of a Ni and Alloyed Martensitic Tool Steel

    Erlach, S., Danoix, F., Lemarchand, D., Leitner, H., Bischof, M. A., Siller, I. & Clemens, H., 2004, MS&T 2004 Conference Proceedings . S. 633-641

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  4. Veröffentlicht

    Isothermal Aging Kinetics of NiAl Precipitates in a Secondary Hardening Steel

    Erlach, S. D., Siller, I., Leitner, H. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, S. 725-732

    Publikationen: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

  5. Veröffentlicht

    Precipitation reactions during the early stages of aging in a Ni and Al alloyed martensitic medium carbon steel

    Erlach, S. D., Danoix, F., Leitner, H., Auger, P., Siller, I. & Clemens, H., 2007, in: Surface and interface analysis. 39, S. 213-220

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  6. Veröffentlicht

    Precipitation behaviour of Ni and Al alloyed hot-work tool steels and its effects on material properties

    Erlach, S. D., 2006

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenDissertation

  7. Veröffentlicht

    Small Angle X-Ray Scattering with Cobalt Radiation for Nanostructure Characterization of Fe-Based Specimen

    Erlacher, K., Görgl, R., Keckes, J., Jakob, H., Bruegemann, L., Doppler, P., Bermann, A., Leitner, H., Marsoner, S. & Fratzl, P., 2004, in: Materials Science Forum . 443-444, S. 155-158

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  8. Veröffentlicht

    Tribological performance of different material pairings of exhaust valve and valve seat under impact-sliding conditions

    Erlacher, G., 2021

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenMasterarbeit

  9. Veröffentlicht

    Thermal decomposition routes of CrN hard coatings synthesized by reactive arc evaporation and magnetron sputtering

    Ernst, W., Neidhardt, J., Willmann, H., Sartory, B., Mayrhofer, P. H. & Mitterer, C., 2008, in: Thin solid films. 517, S. 568-574

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  10. Veröffentlicht

    Thermal decomposition of CrN hard coatings

    Ernst, W., 2006, 81 S.

    Publikationen: Thesis / Studienabschlussarbeiten und HabilitationsschriftenDiplomarbeit