Overview on aluminium alloys as sinks for end-of-life vehicle scrap

Pogatscher, S. & Samberger, S., 1 Okt. 2024, in: IOP Conference Series: Materials Science and Engineering. 2024, 1315, 15 S., 012008.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Annealing effects on Al/polyimide adhesion in flexible optical solar reflectors

Cordill, M. J., Kreiml, P., Lassnig, A., Gebhart, D., Žák, S., Mitterer, C., Grießer, T. & Milassin, G., 2023, in: IOP Conference Series: Materials Science and Engineering. 2023, 1287, 9 S., 012006.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Eu and P additions with Ta grain refiner on the solidification microstructure of Al-7Si-0.3Mg alloys

Spacil, I., Schumacher, P. & LI, J., 2023, in: IOP Conference Series: Materials Science and Engineering. 2023, 1274, 6 S., 012006.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Observation of pertitectic couple growth for a hyper-peritectic alloy under microgravity conditions

Ludwig, A. & Mogeritsch, J. P., 2023, in: IOP Conference Series: Materials Science and Engineering.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

On modelling conjugated heat transfer in the thin slab CC mold and solid shell formation under the applied EMBr

Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., 2023, in: IOP Conference Series: Materials Science and Engineering. 2023, 1274, 7 S., 012023.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Potential etutectic accumulation in single crytal turbine blade due to geometry effect: a numerical study

Zhang, H., Ma, D., Ludwig, A., Kharicha, A. & Wu, M., 2023, in: IOP Conference Series: Materials Science and Engineering.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

FEM Simulation Procedure for Distortion and Residual Stress Analysis of Wire Arc Additive Manufacturing

Nursyahirah Binti Ahmad , S., Manurung, Y., Mat, M. F., Minggu, Z., Jaffar, A., Prüller, S. & Leitner, M., 22 Juni 2020, in: IOP Conference Series: Materials Science and Engineering. 2020, 834, 11 S., 012083.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Grain Growth Prediction of Bead-on-Plate with Filler Wire SS316L using FEM

Faiz Mat, M., Manurung, Y. H. P., Muhammad, N., Ditler, A., Syakir Abd Ghani, M. & Leitner, M., 22 Juni 2020, in: IOP Conference Series: Materials Science and Engineering. 2020, 834, 012009.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Prediction of Crack Propagation Rate and Stress Intensity Factor of Fatigue and Welded Specimen with a Two-Dimensional Finite Element Method

Olanrewaju Busari, Y., Ariri , A., Manurung, Y., Sebayang, D., Leitner, M., Zaini, W. S. B. W., Kamilzukairi, M. A. B. M. & E. Celik, E., 22 Juni 2020, in: IOP Conference Series: Materials Science and Engineering. 2020, 834, 14 S., 012008.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modeling mixed columnar-equiaxed solidification of Sn-10wt%Pb alloy under forced convection driven by travelling magnetic stirring

Zhang, Z., Wu, M., Zhang, H., Karimi-Sibaki, E., Ludwig, A. & Kharicha, A., 12 Juni 2020, in: IOP Conference Series: Materials Science and Engineering. 861, 1, 012024.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Efficient model for the prediction of dendritic grain growth using the lattice Boltzmann method coupled with a cellular automaton algorithm

Jäger, S. & Ludwig, A., 17 Juni 2019, in: IOP Conference Series: Materials Science and Engineering. 529, 1, 012028.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

On modelling viscoplastic behavior of the solidifying shell in the funnel-type continuous casting mold

Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watziger, J. & Rodrigues, C. M. G., 17 Juni 2019, in: IOP Conference Series: Materials Science and Engineering. 529, 1, 012081.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

On the Modelling of Macrosegregation during Twin-Roll Casting

Rodrigues, C. G., Ludwig, A., Kharicha, A., Wu, M. & Vakhrushev, A., 17 Juni 2019, in: IOP Conference Series: Materials Science and Engineering. 2019, 529, 8 S., 012041.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Preface : 5th International Conference on Advances in Solidification Processes (ICASP5) 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR5) June 17-21, 2019 The Pitter Event Center, Salzburg, Austria

Gandin, C. A. & Wu, M., 17 Juni 2019, in: IOP Conference Series: Materials Science and Engineering. 529.2019, 1, 1 S., 011001.

Publikationen: Beitrag in Fachzeitschrift › Leitartikel › (peer-reviewed)

Evaluation of AHSS concepts with a focus on the product properties and appropriate casting characteristics of Arvedi ESP thin slab casters

Bernhard, C., Linzer, B., Presoly, P., Watzinger, I. & Watzinger, J., 2019, in: IOP Conference Series: Materials Science and Engineering. 529.2019, 012071, S. 1-10 10 S., 012071.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture toughness of Silicon Nitride Measured by the Surface Crack in Flexure (SCF) Test Method

Nindhia, T. G. T. & Lube, T., 2019, in: IOP Conference Series: Materials Science and Engineering. 622, 012001.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Transfer › (peer-reviewed)

Fracture Toughness (KIC) of Lithography Based Manufactured Alumina Ceramic

Nindhia, T. G. T., Schlacher, J. C. & Lube, T., 2018, in: IOP Conference Series: Materials Science and Engineering. 012022.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Strength and ductility of heavily deformed pearlitic microstructures

Hohenwarter, A., Kapp, M., Völker, B., Renk, O. & Pippan, R., 1 Aug. 2017, in: IOP Conference Series: Materials Science and Engineering. 219.2017, 1, 10 S., 012003.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and texture evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy

Skrotzki, W., Pukenas, A., Joni, B., Odor, E., Ungar, T., Hohenwarter, A., Pippan, R. & George, E. P., 8 Mai 2017, in: IOP Conference Series: Materials Science and Engineering. 2017, 194, 012028.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Quantum-mechanical study of tensorial elastic and high-temperature thermodynamic properties of grain boundary states in superalloy-phase Ni₃Al

Friák, M., Vsianska, M., Holec, D. & Šob, M., 2017, in: IOP Conference Series: Materials Science and Engineering. 219.2017, 11 S., 012019.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

An attempt to model electrode change during the ESR process

Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, 012006.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

A numerical study on electrochemical transport of ions in calcium fluoride slag

Karimi-Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, 012008.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Assessment of different turbulence models for the motion of non-metallic inclusion in induction crucible furnace

Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, 012026.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Experimental und numerical investigations on cooling efficiency of Air-Mist nozzles on steel during continuous casting

Arth, G., Taferner, M., Bernhard, C. & Michelic, S. C., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 9 S., 012033.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

Riedler, M., Michelic, S. K. & Bernhard, C., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 9 S., 012035.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

New developments on optimizing properties of high-Zn aluminium cast alloys

Krajewski, W. K., Buras, J., Krajewski, P. K., Greer, A. L., Schumacher, P. & Haberl, K., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, 012029.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

Presoly, P. & Bernhard, C., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, 012034.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Simulation of macrosegregation in a large vertical continuous casting of steel

Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, 012032.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Transient melting of an ESR electrode

Kharicha, A., Karimi-Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 10 Aug. 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, 012003.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Estimation of material parameters in nonlinear hardening plasticity models and strain life curves for CuAg alloy

Novak, J. S., Benasciutti, D., De Bona, F., Stanojević, A., De Luca, A. & Raffaglio, Y., 14 Apr. 2016, in: IOP Conference Series: Materials Science and Engineering. 119, 1, 012020.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

International Conference on Materials, Processing and Product Engineering 2015 (MPPE2015)

Eck, S., Ludwig, A. & Ebner, R., 14 Apr. 2016, in: IOP Conference Series: Materials Science and Engineering. 119.2016, 1, 2 S., 011001.

Publikationen: Beitrag in Fachzeitschrift › Leitartikel › (peer-reviewed)

Mechanical properties of low-alloy-steels with bainitic microstructures and varying carbon content

Weber, A., Klarner, J., Vogl, T., Schöngrundner, R., Sam, G. & Buchmayr, B., 14 Apr. 2016, in: IOP Conference Series: Materials Science and Engineering. 2016, 119/1, 012005.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Thermal stability of residual stresses in Ti-6Al-4V components

Stanojevic, A., Angerer, P. & Oberwinkler, B., 14 Apr. 2016, in: IOP Conference Series: Materials Science and Engineering. 119, 1, 012007.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Thermodynamic optimization of individual steel database by means of systematic DSC measurements according the CALPHAD approach

Presoly, P., Six, J. & Bernhard, C., 14 Apr. 2016, in: IOP Conference Series: Materials Science and Engineering. 119, 1, 012013.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Heterogeneous nucleation of entrained eutectic Si in high purity melt spun Al-Si alloys investigated by entrained droplet technique and DSC

Li, J. H., Albu, M., Ludwig, T. H., Hofer, F., Arnberg, L. & Schumacher, P., 31 März 2016, in: IOP Conference Series: Materials Science and Engineering. 117, 1, 012006.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Impurity effects on the solidification of primary Al₃(Sc,Zr) phase in Al alloys

Li, J. H. & Schumacher, P., 31 März 2016, in: IOP Conference Series: Materials Science and Engineering. 117, 1, 012020.

Publikationen: Beitrag in Fachzeitschrift › Konferenzartikel › (peer-reviewed)

Automatic optimization of localized heat treatment for Al-Si-Mg alloys

Ludwig, A. & Holzmann, T., 2016, in: IOP Conference Series: Materials Science and Engineering.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

Riedler, M., Michelic, S. & Bernhard, C., 2016, in: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 8 S., 012035.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Free-surface flow in horizontally rotating cylinder: experiment and simulation

Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2016, in: IOP Conference Series: Materials Science and Engineering. S. 1-7

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of forced convection on solidification and remelting in the developing mushy zone

Wu, M., Vakhrushev, A., Ludwig, A. & Kharicha, A., 2016, in: IOP Conference Series: Materials Science and Engineering.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In-situ observation of the behaviour of non-metallic inclusions at different interfaces in the system steel-slag-refractory

Michelic, S., Salgado, U. D. & Bernhard, C., 2016, in: IOP Conference Series: Materials Science and Engineering. 143, 1, S. 012010 1 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Investigation of metallurgical phenomena related to process and product development by means of High Temperature Confocal Scanning Laser Microscopy

Diéguez-Salgado, U., Michelic, S. & Bernhard, C., 2016, in: IOP Conference Series: Materials Science and Engineering. 119, 1, 1 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model

Schmidtchen, M., Rimnac, A., Warczok, P., Kozeschnnik, E., Bernhard, C., Bragin, S., Kawalla, R. & Linzer, B., 2016, in: IOP Conference Series: Materials Science and Engineering. 119, 1, S. 12001 1 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modelling Al-4wt.%Cu as-cast structure using equiaxed morphological parameters deduced from in-situ synchrotron X-ray radiography

Ahmadein, M., Wu, M., Reinhart, G. & Nguyen-Thi, H., 2016, in: IOP Conference Series: Materials Science and Engineering.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Numerical investigation of solidification and CET of the transparent alloy NPG-37.5 wt.% DC in microgravity “TRACE” experiment

Ahmadein, M., Wu, M., Sturz, L., Zimmermann, G. & Ludwig, A., 2016, in: IOP Conference Series: Materials Science and Engineering.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

SEM and FIB-SEM investigations on potential gas shales in the Dniepr-Donets Basin (Ukraine): Pore space evolution in organic matter during thermal maturation

Misch, D., Mendez Martin, F., Hawranek, G., Onuk, P., Groß, D. & Sachsenhofer, R., 2016, in: IOP Conference Series: Materials Science and Engineering. 109, doi:10.1088/1757-899X/109/1/012010

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Simulation of thermos-solutal convection induced macrosegregation in a Sn-10% Pb alloy benchmark during columnar solidification

Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, in: IOP Conference Series: Materials Science and Engineering.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A benchmark for the validation of solidification modelling algorithms

Kaschnitz, E., Heugenhauser, S. & Schumacher, P., 8 Juli 2015, in: IOP Conference Series: Materials Science and Engineering.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A scale adaptive dendritic envelope model of solidification at mesoscopic scales

Kharicha, A., Stefan-Kharicha, M., Ludwig, A. & Wu, M., 2015, in: IOP Conference Series: Materials Science and Engineering. 84.2015, 9 S., 012032.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Benchmark experiments and numerical modelling of the columnar-equiaxed dendritic growth in the transparent alloy Neopentylglycol-(d)Camphor

Sturz, L., Wu, M., Zimmermann, G., Ludwig, A. & Ahmadein, M., 2015, in: IOP Conference Series: Materials Science and Engineering. 2015, 84, 8 S., 012086.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)