X-ray induced cationic curing of epoxy-bonded composites
Research output: Contribution to journal › Article › Research › peer-review
Standard
In: European polymer journal, Vol. 91.2017, No. June, 2017, p. 31-45.
Research output: Contribution to journal › Article › Research › peer-review
Harvard
APA
Vancouver
Author
Bibtex - Download
}
RIS (suitable for import to EndNote) - Download
TY - JOUR
T1 - X-ray induced cationic curing of epoxy-bonded composites
AU - Puchleitner, Rainer
AU - Rieß, Gisbert
AU - Kern, Wolfgang
PY - 2017
Y1 - 2017
N2 - The present work investigates the feasibility of an X-ray based approach towards the curing of high temperature resistant epoxy-bonded ceramic composites with large wall diameters. In contrast to other irradiation methods such as UV and e-beam, X-rays can penetrate deeply into solid materials. The calculated and measured penetration depth of X-rays in state of the art ceramic materials showed that this method is suitable to cure composites with a wall thickness up to 20 cm. To produce composites with sufficient mechanical properties, resin formulations based on epoxy novolacs and photolabile initiators (photoacid generators) were developed. The cationic curing behavior of these systems was investigated under UV illumination as well as under X-ray irradiation. It is demonstrated that X-ray processing of high temperature resistant ceramics provides a novel and viable method to cure high density composites. Compared to conventional thermal curing, the X-ray based process offers the benefit of lower overall energy consumption and higher curing speed, thus enabling a significantly faster throughput in the industrial production.
AB - The present work investigates the feasibility of an X-ray based approach towards the curing of high temperature resistant epoxy-bonded ceramic composites with large wall diameters. In contrast to other irradiation methods such as UV and e-beam, X-rays can penetrate deeply into solid materials. The calculated and measured penetration depth of X-rays in state of the art ceramic materials showed that this method is suitable to cure composites with a wall thickness up to 20 cm. To produce composites with sufficient mechanical properties, resin formulations based on epoxy novolacs and photolabile initiators (photoacid generators) were developed. The cationic curing behavior of these systems was investigated under UV illumination as well as under X-ray irradiation. It is demonstrated that X-ray processing of high temperature resistant ceramics provides a novel and viable method to cure high density composites. Compared to conventional thermal curing, the X-ray based process offers the benefit of lower overall energy consumption and higher curing speed, thus enabling a significantly faster throughput in the industrial production.
KW - X-ray
U2 - 10.1016/j.eurpolymj.2017.03.036
DO - 10.1016/j.eurpolymj.2017.03.036
M3 - Article
VL - 91.2017
SP - 31
EP - 45
JO - European polymer journal
JF - European polymer journal
SN - 0014-3057
IS - June
ER -