Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys

Research output: Contribution to journalArticleResearchpeer-review

Standard

Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys. / Zamani, Mohammad Reza; Mirzadeh, Hamed; Malekan, Mehdi et al.
In: Journal of alloys and compounds, Vol. 957.2023, No. 25 September, 170443, 05.05.2023.

Research output: Contribution to journalArticleResearchpeer-review

APA

Zamani, M. R., Mirzadeh, H., Malekan, M., Weißensteiner, I., & Roostaei, M. (2023). Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys. Journal of alloys and compounds, 957.2023(25 September), Article 170443. Advance online publication. https://doi.org/10.1016/j.jallcom.2023.170443

Vancouver

Zamani MR, Mirzadeh H, Malekan M, Weißensteiner I, Roostaei M. Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys. Journal of alloys and compounds. 2023 May 5;957.2023(25 September):170443. Epub 2023 May 5. doi: 10.1016/j.jallcom.2023.170443

Author

Zamani, Mohammad Reza ; Mirzadeh, Hamed ; Malekan, Mehdi et al. / Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys. In: Journal of alloys and compounds. 2023 ; Vol. 957.2023, No. 25 September.

Bibtex - Download

@article{9726649279ac4335ab8154eb154ef722,
title = "Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys",
abstract = "The strengthening effects introduced by the addition of 2 at% titanium, vanadium, and niobium, as the well-known micro-alloying elements, to the model CrMnFeCoNi high-entropy alloy (HEA) were studied in the present work. Accordingly, the microstructure, mechanical properties, and strengthening mechanisms of the as-cast CrMnFeCoNi, (CrMnFeCoNi)98Ti2, (CrMnFeCoNi)98V2, and (CrMnFeCoNi)98Nb2 HEAs were investigated by electron-backscattered diffraction (EBSD), tensile testing, differential scanning calorimetry (DSC) thermal analysis, and theoretical calculations and measurements. Depending on the nature of the added elements and their segregation tendency during solidification, different degrees of microstructural refinement were observed in the as-cast ingots. The segregation tendency of Ti was found to be more pronounced compared to that of V (as predicted by the Scheil-Gulliver model), leading to a more refined secondary dendrite arm spacing (SDAS) and grains (resulting from the growth restriction factor and constitutional undercooling). Moreover, Nb addition led to the formation of the (Cr,Fe,Ni)2(Nb) Laves phase at the last stages via the eutectic solidification. The effect of the Laves intermetallic compound (type C14) and twinning-induced plasticity (TWIP) effect on the strength-ductility synergy was discussed. Moreover, a detailed modeling of the strengthening mechanisms revealed that the grain boundary strengthening (represented by the Hall-Petch relationship) and solid solution hardening (due to the lattice distortion) were the primary contributors to the increase in yield strength of V- and Ti-containing HEAs. On the other hand, the formation of the Laves phase, besides solid solution and grain boundary strengthening mechanisms, could lead to a considerable increase in the yield strength of the Nb-containing sample; although it would deteriorate the ductility of the alloy, as also discussed based on its brittle fracture surface appearance and the presence of micro-cracks. Accordingly, the present study is applicable to the design of modified Cantor-based HEAs.",
keywords = "Grain refinement, High-entropy alloys, Mechanical properties, Solidification behavior, Strengthening mechanisms",
author = "Zamani, {Mohammad Reza} and Hamed Mirzadeh and Mehdi Malekan and Irmgard Wei{\ss}ensteiner and Milad Roostaei",
note = "Publisher Copyright: {\textcopyright} 2023 Elsevier B.V.",
year = "2023",
month = may,
day = "5",
doi = "10.1016/j.jallcom.2023.170443",
language = "English",
volume = "957.2023",
journal = "Journal of alloys and compounds",
issn = "0925-8388",
publisher = "Elsevier",
number = "25 September",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys

AU - Zamani, Mohammad Reza

AU - Mirzadeh, Hamed

AU - Malekan, Mehdi

AU - Weißensteiner, Irmgard

AU - Roostaei, Milad

N1 - Publisher Copyright: © 2023 Elsevier B.V.

PY - 2023/5/5

Y1 - 2023/5/5

N2 - The strengthening effects introduced by the addition of 2 at% titanium, vanadium, and niobium, as the well-known micro-alloying elements, to the model CrMnFeCoNi high-entropy alloy (HEA) were studied in the present work. Accordingly, the microstructure, mechanical properties, and strengthening mechanisms of the as-cast CrMnFeCoNi, (CrMnFeCoNi)98Ti2, (CrMnFeCoNi)98V2, and (CrMnFeCoNi)98Nb2 HEAs were investigated by electron-backscattered diffraction (EBSD), tensile testing, differential scanning calorimetry (DSC) thermal analysis, and theoretical calculations and measurements. Depending on the nature of the added elements and their segregation tendency during solidification, different degrees of microstructural refinement were observed in the as-cast ingots. The segregation tendency of Ti was found to be more pronounced compared to that of V (as predicted by the Scheil-Gulliver model), leading to a more refined secondary dendrite arm spacing (SDAS) and grains (resulting from the growth restriction factor and constitutional undercooling). Moreover, Nb addition led to the formation of the (Cr,Fe,Ni)2(Nb) Laves phase at the last stages via the eutectic solidification. The effect of the Laves intermetallic compound (type C14) and twinning-induced plasticity (TWIP) effect on the strength-ductility synergy was discussed. Moreover, a detailed modeling of the strengthening mechanisms revealed that the grain boundary strengthening (represented by the Hall-Petch relationship) and solid solution hardening (due to the lattice distortion) were the primary contributors to the increase in yield strength of V- and Ti-containing HEAs. On the other hand, the formation of the Laves phase, besides solid solution and grain boundary strengthening mechanisms, could lead to a considerable increase in the yield strength of the Nb-containing sample; although it would deteriorate the ductility of the alloy, as also discussed based on its brittle fracture surface appearance and the presence of micro-cracks. Accordingly, the present study is applicable to the design of modified Cantor-based HEAs.

AB - The strengthening effects introduced by the addition of 2 at% titanium, vanadium, and niobium, as the well-known micro-alloying elements, to the model CrMnFeCoNi high-entropy alloy (HEA) were studied in the present work. Accordingly, the microstructure, mechanical properties, and strengthening mechanisms of the as-cast CrMnFeCoNi, (CrMnFeCoNi)98Ti2, (CrMnFeCoNi)98V2, and (CrMnFeCoNi)98Nb2 HEAs were investigated by electron-backscattered diffraction (EBSD), tensile testing, differential scanning calorimetry (DSC) thermal analysis, and theoretical calculations and measurements. Depending on the nature of the added elements and their segregation tendency during solidification, different degrees of microstructural refinement were observed in the as-cast ingots. The segregation tendency of Ti was found to be more pronounced compared to that of V (as predicted by the Scheil-Gulliver model), leading to a more refined secondary dendrite arm spacing (SDAS) and grains (resulting from the growth restriction factor and constitutional undercooling). Moreover, Nb addition led to the formation of the (Cr,Fe,Ni)2(Nb) Laves phase at the last stages via the eutectic solidification. The effect of the Laves intermetallic compound (type C14) and twinning-induced plasticity (TWIP) effect on the strength-ductility synergy was discussed. Moreover, a detailed modeling of the strengthening mechanisms revealed that the grain boundary strengthening (represented by the Hall-Petch relationship) and solid solution hardening (due to the lattice distortion) were the primary contributors to the increase in yield strength of V- and Ti-containing HEAs. On the other hand, the formation of the Laves phase, besides solid solution and grain boundary strengthening mechanisms, could lead to a considerable increase in the yield strength of the Nb-containing sample; although it would deteriorate the ductility of the alloy, as also discussed based on its brittle fracture surface appearance and the presence of micro-cracks. Accordingly, the present study is applicable to the design of modified Cantor-based HEAs.

KW - Grain refinement

KW - High-entropy alloys

KW - Mechanical properties

KW - Solidification behavior

KW - Strengthening mechanisms

UR - http://www.scopus.com/inward/record.url?scp=85156195151&partnerID=8YFLogxK

U2 - 10.1016/j.jallcom.2023.170443

DO - 10.1016/j.jallcom.2023.170443

M3 - Article

AN - SCOPUS:85156195151

VL - 957.2023

JO - Journal of alloys and compounds

JF - Journal of alloys and compounds

SN - 0925-8388

IS - 25 September

M1 - 170443

ER -