Theoretical and experimental study of foam stability mechanism by nanoparticles: Interfacial, bulk and, porous media behavior
Research output: Contribution to journal › Article › Research › peer-review
Standard
In: Journal of molecular liquids, Vol. 304.2020, No. 15 April, 112739, 19.02.2020.
Research output: Contribution to journal › Article › Research › peer-review
Harvard
APA
Vancouver
Author
Bibtex - Download
}
RIS (suitable for import to EndNote) - Download
TY - JOUR
T1 - Theoretical and experimental study of foam stability mechanism by nanoparticles: Interfacial, bulk and, porous media behavior
AU - Suleymani, Muhammad
AU - Ghotbi, Cyrus
AU - Ashouri, Siavash
AU - Moghadisi, Jamshid
AU - Kharrat, Riyaz
PY - 2020/2/19
Y1 - 2020/2/19
N2 - Foam flooding has been applied as a promising method in enhanced oil recovery to obviate the challenges of gas flooding such as fingering, channeling and overriding. However, long-term foam stability is crucial for mobility control. In this work, the effective mechanisms on foam stability in the presence of CaCO3 nanoparticles were assessed both theoretically and experimentally. The static and dynamic behaviors of cationic surfactant (HTAB) foam in the presence of CaCO3 nanoparticles with different hydrophobicity were evaluated. The CaCO3 nanoparticles were treated with a series of long-chain fatty acids to generate a range of wettability. Afterward, the underlying mechanisms were revealed by conducting the supplementary experiments, including measurements of effective diffusion coefficient (Deff), Henry's constant (KH), interfacial tension (IFT), and zeta potential of nanoparticles. Further, efforts were made to analyze the interfacial interactions using xDLVO theory. By increasing of nanoparticles hydrophobicity, the continuous reduction of effective diffusion coefficient, solubility, and IFT was observed, which means higher foam stability. However, the adsorption of modified nanoparticles on the air-solution interface could reduce the total disjoining pressure between two parallel plates, supported by xDLVO prediction. This phenomenon has an adverse effect on the thin film stability. Therefore, there would be an optimum extent of nanoparticles surface modification to obtain the most stable foam stability, which was in agreement with the both bulk and porous media observations. The optimum condition was shifted to the nanoparticles modified with the lower chain fatty acids by increasing the concentration of fatty acid solutions. In this case, the negative effect of reduced disjoining pressure was more pronounced.
AB - Foam flooding has been applied as a promising method in enhanced oil recovery to obviate the challenges of gas flooding such as fingering, channeling and overriding. However, long-term foam stability is crucial for mobility control. In this work, the effective mechanisms on foam stability in the presence of CaCO3 nanoparticles were assessed both theoretically and experimentally. The static and dynamic behaviors of cationic surfactant (HTAB) foam in the presence of CaCO3 nanoparticles with different hydrophobicity were evaluated. The CaCO3 nanoparticles were treated with a series of long-chain fatty acids to generate a range of wettability. Afterward, the underlying mechanisms were revealed by conducting the supplementary experiments, including measurements of effective diffusion coefficient (Deff), Henry's constant (KH), interfacial tension (IFT), and zeta potential of nanoparticles. Further, efforts were made to analyze the interfacial interactions using xDLVO theory. By increasing of nanoparticles hydrophobicity, the continuous reduction of effective diffusion coefficient, solubility, and IFT was observed, which means higher foam stability. However, the adsorption of modified nanoparticles on the air-solution interface could reduce the total disjoining pressure between two parallel plates, supported by xDLVO prediction. This phenomenon has an adverse effect on the thin film stability. Therefore, there would be an optimum extent of nanoparticles surface modification to obtain the most stable foam stability, which was in agreement with the both bulk and porous media observations. The optimum condition was shifted to the nanoparticles modified with the lower chain fatty acids by increasing the concentration of fatty acid solutions. In this case, the negative effect of reduced disjoining pressure was more pronounced.
KW - Foam stability
KW - XDLVO theory
KW - Wettability alteration
KW - Mobility control
KW - Foam flooding
UR - http://www.scopus.com/inward/record.url?scp=85080035201&partnerID=8YFLogxK
U2 - https://doi.org/10.1016/j.molliq.2020.112739
DO - https://doi.org/10.1016/j.molliq.2020.112739
M3 - Article
VL - 304.2020
JO - Journal of molecular liquids
JF - Journal of molecular liquids
SN - 873-3166
IS - 15 April
M1 - 112739
ER -