Synthesis and Characterization of Calcium Substituted LaFeO3 as a Potential SOFC Cathode
Research output: Contribution to conference › Poster › Research
Standard
2015. Poster session presented at 16. Österreichische Chemietage, Innsbruck, Austria.
Research output: Contribution to conference › Poster › Research
Harvard
APA
Vancouver
Author
Bibtex - Download
}
RIS (suitable for import to EndNote) - Download
TY - CONF
T1 - Synthesis and Characterization of Calcium Substituted LaFeO3 as a Potential SOFC Cathode
AU - Berger, Christian
AU - Bucher, Edith
AU - Sitte, Werner
PY - 2015/9/21
Y1 - 2015/9/21
N2 - One of the major goals in the research field of solid oxide fuel cells (SOFCs) is the development of cost-effective component materials for intermediate operating temperatures (600-800°C) [1]. In this connection, mixed ionic-electronic conductors based on LaFeO3 have attracted keen interest. Compositions from the series La1-xMxFeO3 (M=Sr, Ca) demonstrated superior electrochemical properties as well as adjustable thermal expansion coefficients. For example La1-xCaxFeO3 (LCF) has been studied as potential SOFC cathode, catalyst for methane combustion and oxygen sensor [2-5]. In the present study, LCF powder was synthesized via a glycine-nitrate-process. The microstructure, thermal expansion coefficient, electrical conductivity and oxygen exchange properties were characterized. The calcined powder showed a broad bimodal particle size distribution due to the agglomeration of the smaller particles. After ball milling, a submicron monomodal particle size distribution was achieved. The fine powder was pressed and a sinter curve in ambient air was recorded. The thermal expansion coefficient of sintered LCF was measured in the p(O2)-range from 1 to 1×10-3 bar. The resulting values are in good agreement with those of Ce0.9Gd0.1O2 (CGO) [6] which is frequently applied as solid electrolyte material in SOFCs. The results indicate that LCF is a promising SOFC cathode material for application in the intermediate temperature range. ____ [1] S. C. Singhal, Solid State Ionics 2002, 152–153, 405-410. [2] A. Mai, et.al., Solid State Ionics 2005, 176, 1341-1350. [3] P. Ciambelli, et.al., Applied Catalysis B: Environmental 2001, 33, 193-203. [4] L. B. Kong, Y. S. Shen, Sensors and Actuators B: Chemical 1996, 30, 217-221. [5] M. H. Hung, M. V. M. Rao, D.S. Tsai, Materials Chemistry and Physics 2007, 101, 297-302. [6] S. J. Hong, A. V. Virkar, J. Am. Ceram. Soc. 1995, 78, 433-439.
AB - One of the major goals in the research field of solid oxide fuel cells (SOFCs) is the development of cost-effective component materials for intermediate operating temperatures (600-800°C) [1]. In this connection, mixed ionic-electronic conductors based on LaFeO3 have attracted keen interest. Compositions from the series La1-xMxFeO3 (M=Sr, Ca) demonstrated superior electrochemical properties as well as adjustable thermal expansion coefficients. For example La1-xCaxFeO3 (LCF) has been studied as potential SOFC cathode, catalyst for methane combustion and oxygen sensor [2-5]. In the present study, LCF powder was synthesized via a glycine-nitrate-process. The microstructure, thermal expansion coefficient, electrical conductivity and oxygen exchange properties were characterized. The calcined powder showed a broad bimodal particle size distribution due to the agglomeration of the smaller particles. After ball milling, a submicron monomodal particle size distribution was achieved. The fine powder was pressed and a sinter curve in ambient air was recorded. The thermal expansion coefficient of sintered LCF was measured in the p(O2)-range from 1 to 1×10-3 bar. The resulting values are in good agreement with those of Ce0.9Gd0.1O2 (CGO) [6] which is frequently applied as solid electrolyte material in SOFCs. The results indicate that LCF is a promising SOFC cathode material for application in the intermediate temperature range. ____ [1] S. C. Singhal, Solid State Ionics 2002, 152–153, 405-410. [2] A. Mai, et.al., Solid State Ionics 2005, 176, 1341-1350. [3] P. Ciambelli, et.al., Applied Catalysis B: Environmental 2001, 33, 193-203. [4] L. B. Kong, Y. S. Shen, Sensors and Actuators B: Chemical 1996, 30, 217-221. [5] M. H. Hung, M. V. M. Rao, D.S. Tsai, Materials Chemistry and Physics 2007, 101, 297-302. [6] S. J. Hong, A. V. Virkar, J. Am. Ceram. Soc. 1995, 78, 433-439.
M3 - Poster
T2 - 16. Österreichische Chemietage
Y2 - 21 September 2015 through 24 September 2015
ER -