Structure and cryogenic mechanical properties of severely deformed nonequiatomic alloys of Fe–Mn–Co–Cr system
Research output: Contribution to journal › Article › Research › peer-review
Standard
In: Low temperature physics, Vol. 49.2023, No. 11, 01.11.2023, p. 1423-1434.
Research output: Contribution to journal › Article › Research › peer-review
Harvard
APA
Vancouver
Author
Bibtex - Download
}
RIS (suitable for import to EndNote) - Download
TY - JOUR
T1 - Structure and cryogenic mechanical properties of severely deformed nonequiatomic alloys of Fe–Mn–Co–Cr system
AU - Tabachnikova, E. D.
AU - Hryhorova, T. V.
AU - Smirnov, S. N.
AU - Kolodiy, I. V.
AU - Shapovalov, Yu O.
AU - Levenets, A. V.
AU - Shumilin, S. E.
AU - Kashuba, I. V.
AU - Tikhonovsky, M. A.
AU - Spieckermann, Florian
AU - Zehetbauer, Michael J.
AU - Schafler, E.
AU - Huang, Y. J.
AU - Langdon, Terence G.
N1 - Publisher Copyright: © E. D. Tabachnikova, T. V. Hryhorova, S. N. Smirnov, I. V. Kolodiy, Yu. O. Shapovalov, A. V. Levenets, S. E. Shumilin, I. V. Kashuba, M. A. Tikhonovsky, F. Spieckermann, M. J. Zehetbauer, E. Schafler, Y. Huang, and T. G. Langdon, 2023.
PY - 2023/11/1
Y1 - 2023/11/1
N2 - The work is devoted to a study of the structure and mechanical properties of two nonequiatomic medium-entropy nanocrystalline alloys, in which in a coarse state additional mechanisms act during plastic deformation — twinning (TWIP) in the Fe40Mn40Co10Cr10 alloy and phase transformations (TRIP) in the Fe50Mn30Co10Cr10 alloy. The nanocrystalline state in these alloys is achieved by high-pressure torsion (HPT) at 300 K and 77 K after different numbers of revolutions n = 0.25 and 5. In the nanostructural state in the TWIP Fe40Mn40Co10Cr10 and the TRIP Fe50Mn30Co10Cr10 alloys, a basically complete phase transition from the fcc lattice to hcp is observed, the content of which does not depend very strongly on the HPT temperature and deformation. For both alloys in the nanostructured state, there is a significant decrease in differences in the phase composition and microhardness Hv by comparison with the coarse-grained state. A decrease in the HPT temperature and an increase in HPT deformation for all the cases studied lead to an increase in the value of Hv. The Fe40Mn40Co10Cr10 TWIP alloy remains ductile under active compression deformation at 300 and 77 K, while there is no macroscopic plasticity in the Fe50Mn30Co10Cr10 TRIP alloy under similar conditions. For the Fe40Mn40Co10Cr10 TWIP the thermally-activated character of plastic deformation is retained during the transition from the coarse-grained to the nanostructured state.
AB - The work is devoted to a study of the structure and mechanical properties of two nonequiatomic medium-entropy nanocrystalline alloys, in which in a coarse state additional mechanisms act during plastic deformation — twinning (TWIP) in the Fe40Mn40Co10Cr10 alloy and phase transformations (TRIP) in the Fe50Mn30Co10Cr10 alloy. The nanocrystalline state in these alloys is achieved by high-pressure torsion (HPT) at 300 K and 77 K after different numbers of revolutions n = 0.25 and 5. In the nanostructural state in the TWIP Fe40Mn40Co10Cr10 and the TRIP Fe50Mn30Co10Cr10 alloys, a basically complete phase transition from the fcc lattice to hcp is observed, the content of which does not depend very strongly on the HPT temperature and deformation. For both alloys in the nanostructured state, there is a significant decrease in differences in the phase composition and microhardness Hv by comparison with the coarse-grained state. A decrease in the HPT temperature and an increase in HPT deformation for all the cases studied lead to an increase in the value of Hv. The Fe40Mn40Co10Cr10 TWIP alloy remains ductile under active compression deformation at 300 and 77 K, while there is no macroscopic plasticity in the Fe50Mn30Co10Cr10 TRIP alloy under similar conditions. For the Fe40Mn40Co10Cr10 TWIP the thermally-activated character of plastic deformation is retained during the transition from the coarse-grained to the nanostructured state.
KW - cryogenic temperatures
KW - high entropy alloys
KW - mechanical properties
KW - microstructure
UR - http://www.scopus.com/inward/record.url?scp=85176443085&partnerID=8YFLogxK
U2 - 10.1063/10.0021377
DO - 10.1063/10.0021377
M3 - Article
VL - 49.2023
SP - 1423
EP - 1434
JO - Low temperature physics
JF - Low temperature physics
SN - 1063-777X
IS - 11
ER -