Single-step fabrication and work function engineering of Langmuir-Blodgett assembled few-layer graphene films with Li and Au salts

Research output: Contribution to journalArticleResearchpeer-review

Standard

Single-step fabrication and work function engineering of Langmuir-Blodgett assembled few-layer graphene films with Li and Au salts. / Milošević, Ivana R.; Vasić, Borislav; Matković, Aleksandar et al.
In: Scientific reports (e-only), Vol. 10.2020, No. 1, 8476, 21.05.2020.

Research output: Contribution to journalArticleResearchpeer-review

Vancouver

Bibtex - Download

@article{7492828e56be4bd29b3857c3066b5171,
title = "Single-step fabrication and work function engineering of Langmuir-Blodgett assembled few-layer graphene films with Li and Au salts",
abstract = "To implement large-area solution-processed graphene films in low-cost transparent conductor applications, it is necessary to have the control over the work function (WF) of the film. In this study we demonstrate a straightforward single-step chemical approach for modulating the work function of graphene films. In our approach, chemical doping of the film is introduced at the moment of its formation. The films are self-assembled from liquid-phase exfoliated few-layer graphene sheet dispersions by Langmuir-Blodgett technique at the water-air interfaces. To achieve a single-step chemical doping, metal standard solutions are introduced instead of water. Li standard solutions (LiCl, LiNO3, Li2CO3) were used as n-dopant, and gold standard solution, H(AuCl4), as p-dopant. Li based salts decrease the work function, while Au based salts increase the work function of the entire film. The maximal doping in both directions yields a significant range of around 0.7 eV for the work function modulation. In all cases when Li-based salts are introduced, electrical properties of the film deteriorate. Further, lithium nitrate (LiNO3) was selected as the best choice for n-type doping since it provides the largest work function modulation (by 400 meV), and the least influence on the electrical properties of the film.",
author = "Milo{\v s}evi{\'c}, {Ivana R.} and Borislav Vasi{\'c} and Aleksandar Matkovi{\'c} and Jasna Vujin and Sonja A{\v s}krabi{\'c} and Markus Kratzer and Thomas Griesser and Christian Teichert and Rado{\v s} Gaji{\'c}",
year = "2020",
month = may,
day = "21",
doi = "10.1038/s41598-020-65379-1",
language = "English",
volume = "10.2020",
journal = "Scientific reports (e-only)",
issn = "2045-2322",
publisher = "Nature Publishing Group",
number = "1",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Single-step fabrication and work function engineering of Langmuir-Blodgett assembled few-layer graphene films with Li and Au salts

AU - Milošević, Ivana R.

AU - Vasić, Borislav

AU - Matković, Aleksandar

AU - Vujin, Jasna

AU - Aškrabić, Sonja

AU - Kratzer, Markus

AU - Griesser, Thomas

AU - Teichert, Christian

AU - Gajić, Radoš

PY - 2020/5/21

Y1 - 2020/5/21

N2 - To implement large-area solution-processed graphene films in low-cost transparent conductor applications, it is necessary to have the control over the work function (WF) of the film. In this study we demonstrate a straightforward single-step chemical approach for modulating the work function of graphene films. In our approach, chemical doping of the film is introduced at the moment of its formation. The films are self-assembled from liquid-phase exfoliated few-layer graphene sheet dispersions by Langmuir-Blodgett technique at the water-air interfaces. To achieve a single-step chemical doping, metal standard solutions are introduced instead of water. Li standard solutions (LiCl, LiNO3, Li2CO3) were used as n-dopant, and gold standard solution, H(AuCl4), as p-dopant. Li based salts decrease the work function, while Au based salts increase the work function of the entire film. The maximal doping in both directions yields a significant range of around 0.7 eV for the work function modulation. In all cases when Li-based salts are introduced, electrical properties of the film deteriorate. Further, lithium nitrate (LiNO3) was selected as the best choice for n-type doping since it provides the largest work function modulation (by 400 meV), and the least influence on the electrical properties of the film.

AB - To implement large-area solution-processed graphene films in low-cost transparent conductor applications, it is necessary to have the control over the work function (WF) of the film. In this study we demonstrate a straightforward single-step chemical approach for modulating the work function of graphene films. In our approach, chemical doping of the film is introduced at the moment of its formation. The films are self-assembled from liquid-phase exfoliated few-layer graphene sheet dispersions by Langmuir-Blodgett technique at the water-air interfaces. To achieve a single-step chemical doping, metal standard solutions are introduced instead of water. Li standard solutions (LiCl, LiNO3, Li2CO3) were used as n-dopant, and gold standard solution, H(AuCl4), as p-dopant. Li based salts decrease the work function, while Au based salts increase the work function of the entire film. The maximal doping in both directions yields a significant range of around 0.7 eV for the work function modulation. In all cases when Li-based salts are introduced, electrical properties of the film deteriorate. Further, lithium nitrate (LiNO3) was selected as the best choice for n-type doping since it provides the largest work function modulation (by 400 meV), and the least influence on the electrical properties of the film.

UR - http://www.scopus.com/inward/record.url?scp=85085158407&partnerID=8YFLogxK

U2 - 10.1038/s41598-020-65379-1

DO - 10.1038/s41598-020-65379-1

M3 - Article

C2 - 32439854

AN - SCOPUS:85085158407

VL - 10.2020

JO - Scientific reports (e-only)

JF - Scientific reports (e-only)

SN - 2045-2322

IS - 1

M1 - 8476

ER -