Single Edge Precrack V-Notched Beam (SEPVNB) Fracture Toughness Testing on Silicon Nitride
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Standard
Materials science forum. Vol. 962 Trans Tech Publications, 2019. p. 205-209 (Materials Science Forum).
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Harvard
APA
Vancouver
Author
Bibtex - Download
}
RIS (suitable for import to EndNote) - Download
TY - CHAP
T1 - Single Edge Precrack V-Notched Beam (SEPVNB) Fracture Toughness Testing on Silicon Nitride
AU - Nindhia, Tjokorda Gde Tirta
AU - Lube, Tanja
N1 - Publisher Copyright: © 2019 Trans Tech Publications Ltd, Switzerland.
PY - 2019
Y1 - 2019
N2 - The previous Measurement of fracture toughness test by using bright indentation for precracked beam method (ASTM C1421) was found difficult to be carried out due to difficulty in precrack generation and measurement of the crack size. In this research single edge precrack V-notch beam (SEPVNB) is introduced as an alternative to solve the problem from previous standardized method. A real crack that can be created with referred size is recognized as the best condition for fracture toughness test. The material prepared for this purpose was silicon nitride (Si3N4) produced by CeramTec (Plochingen, Germany) under the name SL200 B. It is a gas pressure sintered ceramic containing ≈3 wt. % Al2O3 and≈ 3 wt. % Y2O3. The V Notch was prepared by using razor blade with diamond paste following ISO/FDIS 23146 standard preparation with more addition on precrack introduction. The precrack was introduced by so called opposite roller loading. The fracture toughness test was carried out by following procedure in ISO/FDIS 23146. The result then was compared for validation with both single edge V-notch beam standard (ISO/FDIS 23146) and Surface crack in Flexure SCF (ASTM C 1421). The result of fracture toughness by using method that is introduce in this research is found 5.827±0.275 MPa 1/2 which is close to the result of SCF (5.335± 0.222 MPa 1/2 ). Meanwhile the value of fracture toughness by using V-notch beam is 4.913±0.098 MPa 1/2.
AB - The previous Measurement of fracture toughness test by using bright indentation for precracked beam method (ASTM C1421) was found difficult to be carried out due to difficulty in precrack generation and measurement of the crack size. In this research single edge precrack V-notch beam (SEPVNB) is introduced as an alternative to solve the problem from previous standardized method. A real crack that can be created with referred size is recognized as the best condition for fracture toughness test. The material prepared for this purpose was silicon nitride (Si3N4) produced by CeramTec (Plochingen, Germany) under the name SL200 B. It is a gas pressure sintered ceramic containing ≈3 wt. % Al2O3 and≈ 3 wt. % Y2O3. The V Notch was prepared by using razor blade with diamond paste following ISO/FDIS 23146 standard preparation with more addition on precrack introduction. The precrack was introduced by so called opposite roller loading. The fracture toughness test was carried out by following procedure in ISO/FDIS 23146. The result then was compared for validation with both single edge V-notch beam standard (ISO/FDIS 23146) and Surface crack in Flexure SCF (ASTM C 1421). The result of fracture toughness by using method that is introduce in this research is found 5.827±0.275 MPa 1/2 which is close to the result of SCF (5.335± 0.222 MPa 1/2 ). Meanwhile the value of fracture toughness by using V-notch beam is 4.913±0.098 MPa 1/2.
UR - http://www.scopus.com/inward/record.url?scp=85071943348&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/MSF.962.205
DO - 10.4028/www.scientific.net/MSF.962.205
M3 - Chapter
VL - 962
T3 - Materials Science Forum
SP - 205
EP - 209
BT - Materials science forum
PB - Trans Tech Publications
ER -
